RP164PJ153CS Equivalent & Substitute Parts Reference

Part Overview

The RP164PJ153CS is a 4-resistor network array manufactured by Samsung Electro-Mechanics, featuring 15kΩ isolated resistors in a 1206 surface mount package. This component is classified as obsolete, necessitating identification of equivalent and substitute parts for ongoing design support and procurement continuity. The part delivers 62.5mW power per element with ±5% tolerance and ±200ppm/°C temperature coefficient across an operating range of -55°C to 155°C.

Substiute Parts

RP164PJ153CS

Samsung Electro-MechanicsIn Stock: 1778RP164PJ153CS Datasheet

Current PartRFQ

YC164-JR-0715KL

YAGEOIn Stock: 89035YC164-JR-0715KL Datasheet

DirectRFQ

RAVF164DFT15K0

Stackpole Electronics IncIn Stock: 771RAVF164DFT15K0 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RP164PJ153CS is determined by the following critical parameters:

Core Compatibility Requirements:

• Resistance value: 15kΩ
• Circuit configuration: Isolated 4-resistor network
• Package: 1206 (3216 Metric) with 8 pins
• Temperature coefficient: ±200ppm/°C
• Operating temperature range: -55°C to 155°C
• Mounting type: Surface Mount

Allowable Parameter Variations:

• Tolerance: ±5% or tighter (±1% acceptable as upgrade)
• Power per element: 62.5mW or higher (100mW acceptable as upgrade)
• Packaging format: Cut Tape (CT), Digi-Reel®, or Tape & Reel (TR)
• Product status: Active preferred; obsolete acceptable for direct equivalents

The identified substitute parts maintain all core compatibility requirements while offering either equivalent or enhanced electrical performance characteristics.

Parameter Comparison

Engineering Selection Recommendations

YC164-JR-0715KL (YAGEO) - Direct Equivalent

The YC164-JR-0715KL provides direct functional equivalence to the RP164PJ153CS. Both parts share identical electrical specifications: 15kΩ resistance, ±5% tolerance, 62.5mW power per element, and ±200ppm/°C temperature coefficient. The YC164-JR-0715KL maintains active product status and carries AEC-Q200 automotive qualification with ROHS3 compliance. The maximum seated height of 0.028" (0.70mm) represents a 0.004" increase compared to the original part; this variation remains within typical PCB assembly tolerances for 1206 packages. Packaging is supplied in Tape & Reel (TR) format with 89,000 units in stock inventory.

RAVF164DFT15K0 (Stackpole Electronics Inc) - Enhanced Upgrade

The RAVF164DFT15K0 functions as an upgraded substitute with improved electrical performance. This part maintains the 15kΩ resistance and ±200ppm/°C temperature coefficient while offering tighter tolerance (±1% versus ±5%) and increased power rating (100mW per element versus 62.5mW). The RAVF164DFT15K0 is qualified for automotive applications under AEC-Q200 and carries ROHS3 compliance. The seated height of 0.024" (0.60mm) matches the original RP164PJ153CS specification. Packaging is supplied in Tape & Reel (TR) format with 750 units in stock inventory.

Both substitute parts are surface mount compatible with the original 1206 package footprint and maintain the 8-pin isolated resistor network configuration.

Frequently Asked Questions (FAQ)

Q: Can the YC164-JR-0715KL be used as a direct replacement for the RP164PJ153CS?

A: Yes. The YC164-JR-0715KL is a direct equivalent. Both parts feature identical resistance (15kΩ), tolerance (±5%), power per element (62.5mW), temperature coefficient (±200ppm/°C), and operating temperature range (-55°C to 155°C). The package dimensions and pin configuration are identical. The maximum seated height difference of 0.004" is within standard PCB assembly tolerances for 1206 packages.

Q: What are the advantages of using RAVF164DFT15K0 instead of the direct equivalent?

A: The RAVF164DFT15K0 provides enhanced electrical performance through tighter tolerance (±1% versus ±5%) and higher power rating per element (100mW versus 62.5mW). These improvements allow operation in higher power dissipation applications while maintaining superior resistance accuracy. The part remains compatible with the original 1206 footprint and maintains identical temperature coefficient and operating range specifications.

Q: Are there height differences between these parts that affect PCB assembly?

A: The YC164-JR-0715KL has a maximum seated height of 0.028" (0.70mm), which is 0.004" taller than both the RP164PJ153CS and RAVF164DFT15K0 at 0.024" (0.60mm). This variation is within standard tolerances for 1206 surface mount packages and does not affect PCB assembly compatibility or reflow soldering processes.

Q: Do all three parts meet the same compliance standards?

A: Yes. All three parts are ROHS3 compliant, REACH unaffected, and carry MSL 1 (Unlimited) moisture sensitivity ratings. The YC164-JR-0715KL and RAVF164DFT15K0 both carry AEC-Q200 automotive qualification, providing additional assurance for automotive and high-reliability applications.

Q: What is the difference between Cut Tape and Tape & Reel packaging formats?

A: The RP164PJ153CS is supplied in Cut Tape (CT) and Digi-Reel® formats, while both substitute parts are supplied in Tape & Reel (TR) format. All formats are compatible with standard pick-and-place assembly equipment. Tape & Reel format typically offers higher volume efficiency and is standard for active production parts.

Q: Can these parts be used interchangeably in existing designs?

A: Yes, within the constraints of the electrical specifications. The YC164-JR-0715KL provides direct substitution. The RAVF164DFT15K0 can be used in applications where the enhanced tolerance and power rating provide design margin benefits. All three parts maintain the same 1206 footprint, pin configuration, and thermal characteristics.