RP164PJ134CS Equivalent & Substitute Parts

Part Overview

The RP164PJ134CS is a 130k Ohm isolated 4-resistor network array manufactured by Samsung Electro-Mechanics in a 1206 (3216 Metric) surface mount package. This component features ±5% tolerance, ±200ppm/°C temperature coefficient, and 62.5mW power per element rating across its four isolated resistor elements. The part is classified as obsolete, necessitating identification of functionally equivalent alternatives for ongoing design support and procurement continuity.

Substiute Parts

RP164PJ134CS

Samsung Electro-MechanicsIn Stock: 812RP164PJ134CS Datasheet

Current PartRFQ

RAVF164DJT130K

Stackpole Electronics IncIn Stock: 1182RAVF164DJT130K Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RP164PJ134CS is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Resistance value: 130k Ohm
• Tolerance: ±5%
• Number of resistor elements: 4
• Circuit configuration: Isolated
• Package type: 1206 (3216 Metric), Convex, Long Side Terminals
• Pin count: 8
• Temperature coefficient: ±200ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Mounting type: Surface Mount

Allowable Variation:

• Power per element rating may exceed the original specification (62.5mW minimum required)
• Product status may differ (active vs. obsolete)
• Packaging format may differ (bulk vs. tape & reel)
• Automotive qualification and certifications may be present in substitutes

The RAVF164DJT130K from Stackpole Electronics Inc meets all mandatory matching parameters and provides enhanced power rating (100mW per element), making it a direct functional substitute.

Parameter Comparison

Engineering Selection Recommendations

The RAVF164DJT130K is a direct functional equivalent to the RP164PJ134CS for applications requiring a 130k Ohm isolated 4-resistor network array in 1206 surface mount package format.

Selection Basis:

The substitute part maintains electrical equivalence across all critical parameters: identical resistance value, tolerance, temperature coefficient, operating temperature range, and circuit isolation configuration. Physical compatibility is confirmed through matching package dimensions and pin configuration.

The RAVF164DJT130K provides enhanced power dissipation capability (100mW per element versus 62.5mW), which represents a performance improvement without introducing compatibility concerns. The active product status of the Stackpole component ensures ongoing availability and manufacturing support, addressing the obsolescence of the original Samsung part.

Both components maintain ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1), ensuring regulatory and environmental compatibility. The Stackpole part includes AEC-Q200 automotive qualification, providing additional certification for applications requiring automotive-grade components.

Frequently Asked Questions (FAQ)

Q: Can the RAVF164DJT130K be used as a direct replacement for the RP164PJ134CS in existing designs?

A: Yes. The RAVF164DJT130K is electrically and mechanically compatible with the RP164PJ134CS. Both components share identical resistance values, tolerance, temperature coefficients, operating temperature ranges, and 1206 package dimensions with 8-pin configurations. No circuit modifications are required.

Q: What is the significance of the higher power rating (100mW vs. 62.5mW) in the substitute part?

A: The increased power per element rating in the RAVF164DJT130K indicates enhanced thermal dissipation capability. This allows the component to operate safely at higher power levels without exceeding temperature limits. For applications operating within the original 62.5mW specification, this difference has no negative impact and provides additional design margin.

Q: Are there any package or mounting differences between these components?

A: Both components use identical 1206 (3216 Metric) surface mount packages with convex, long side terminals. Physical dimensions are equivalent (0.126" L x 0.063" W), with maximum seated heights of 0.024" (0.61mm for Samsung, 0.60mm for Stackpole). These components are interchangeable in PCB layouts and reflow processes.

Q: What is the difference between bulk and tape & reel packaging?

A: The RP164PJ134CS is supplied in bulk packaging, while the RAVF164DJT130K is supplied in tape & reel format. Tape & reel packaging is standard for automated assembly processes and provides better protection during storage and handling. Both packaging formats contain the same component with identical electrical specifications.

Q: Does the AEC-Q200 qualification of the substitute part affect its use in non-automotive applications?

A: No. AEC-Q200 qualification indicates the component meets automotive industry reliability and quality standards. This certification is a superset of general industrial requirements and does not restrict use in non-automotive applications. Components with automotive qualification are suitable for any application requiring equivalent or lower reliability standards.

Q: Are the tolerance and temperature coefficient specifications identical between both parts?

A: Yes. Both the RP164PJ134CS and RAVF164DJT130K maintain ±5% tolerance and ±200ppm/°C temperature coefficient. These specifications ensure equivalent performance in precision circuit applications requiring stable resistor values across temperature variations.

Q: What is the significance of the obsolete status of the original part?

A: The obsolete status of the RP164PJ134CS indicates Samsung Electro-Mechanics has discontinued manufacturing this component. The RAVF164DJT130K from Stackpole Electronics Inc is an active product with ongoing production and supply availability, ensuring long-term component procurement for new designs and production runs.