RP164PJ133CS Equivalent & Substitute Parts

Part Overview

The RP164PJ133CS is a 13k Ohm isolated resistor array manufactured by Samsung Electro-Mechanics, configured as a 4-element network in 1206 (3216 Metric) surface mount package with convex, long side terminals. This component is classified as obsolete, making identification of compatible substitute parts essential for ongoing production and maintenance applications. The part delivers 62.5mW power per element with ±5% tolerance and ±200ppm/°C temperature coefficient across an operating range of -55°C to 155°C.

Substiute Parts

RP164PJ133CS

Samsung Electro-MechanicsIn Stock: 1141RP164PJ133CS Datasheet

Current PartRFQ

RAVF164DJT13K0

Stackpole Electronics IncIn Stock: 983RAVF164DJT13K0 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RP164PJ133CS is determined by strict alignment of the following critical parameters:

Mandatory Matching Parameters:

• Resistance Value: 13k Ohm
• Number of Resistors: 4
• Circuit Type: Isolated
• Tolerance: ±5%
• Temperature Coefficient: ±200ppm/°C
• Operating Temperature Range: -55°C to 155°C
• Package / Case: 1206 (3216 Metric), Convex, Long Side Terminals
• Number of Pins: 8
• Mounting Type: Surface Mount

Allowable Variation Parameters:

• Power Per Element: Substitute must equal or exceed 62.5mW
• Product Status: Active status preferred for long-term availability
• Compliance Certifications: RoHS3 and REACH status maintained

The substitute part RAVF164DJT13K0 manufactured by Stackpole Electronics Inc satisfies all mandatory parameters and exceeds the power per element specification at 100mW, providing enhanced thermal margin while maintaining identical electrical and mechanical characteristics.

Parameter Comparison

Engineering Selection Recommendations

The RAVF164DJT13K0 from Stackpole Electronics Inc is a direct functional equivalent to the obsolete RP164PJ133CS. Selection of this substitute is supported by the following engineering factors:

Electrical Equivalence: All critical electrical parameters match exactly, including resistance value, tolerance, temperature coefficient, and operating temperature range. The increased power per element rating (100mW versus 62.5mW) provides additional thermal headroom without introducing any compatibility issues.

Mechanical Compatibility: Package dimensions, pin configuration, and mounting type are identical. The component occupies the same PCB footprint and is compatible with existing assembly processes.

Compliance Status: Both components maintain ROHS3 compliance and REACH unaffected status, ensuring regulatory alignment for current and future production requirements.

Product Availability: The substitute part carries active product status with documented inventory availability, addressing the obsolescence constraint of the original Samsung component.

Automotive Qualification: The RAVF164DJT13K0 carries AEC-Q200 automotive qualification, extending application scope beyond the original part's documented use cases.

Frequently Asked Questions (FAQ)

Q: Can RAVF164DJT13K0 be used as a direct replacement for RP164PJ133CS in existing designs?

A: Yes. The substitute part matches all mandatory electrical and mechanical parameters. Identical package dimensions, pin count, and footprint enable direct PCB substitution without design modification.

Q: What is the significance of the higher power rating in the substitute part?

A: The RAVF164DJT13K0 is rated at 100mW per element compared to 62.5mW in the original part. This higher rating provides additional thermal margin and does not create compatibility issues. The substitute can handle equal or greater power dissipation without performance degradation.

Q: Are there any compliance differences between the two parts?

A: No. Both components are ROHS3 compliant and REACH unaffected. Regulatory status is equivalent for both parts.

Q: Why is the original RP164PJ133CS classified as obsolete?

A: Product obsolescence is determined by manufacturer discontinuation. The Samsung Electro-Mechanics RP series resistor array has been discontinued. The Stackpole RAVF164DJT13K0 maintains active production status and is the recommended long-term solution.

Q: Does the substitute part require any circuit design changes?

A: No. Electrical characteristics are identical. The component operates within the same voltage and current parameters as the original part. No circuit modifications are necessary.

Q: What is the difference between the packaging options?

A: The original part is supplied in standard packaging, while the substitute is available in Tape & Reel (TR) format. Both formats contain identical components; packaging format selection depends on assembly process requirements and order quantity.

Q: Are the temperature coefficients identical?

A: Yes. Both parts specify ±200ppm/°C temperature coefficient across the -55°C to 155°C operating range, ensuring equivalent thermal stability and performance drift characteristics.