RP164PJ110CS Equivalent & Substitute Parts

Part Overview

The RP164PJ110CS is a resistor array network manufactured by Samsung Electro-Mechanics, consisting of four isolated 11 Ohm resistors in a 1206 (3216 Metric) surface mount package with convex, long side terminals. This component is classified as obsolete, making identification of equivalent substitute parts essential for ongoing production support and design continuity. The part delivers 62.5mW power per element with ±5% tolerance and ±200ppm/°C temperature coefficient across an operating range of -55°C to 155°C.

Substiute Parts

RP164PJ110CS

Samsung Electro-MechanicsIn Stock: 699RP164PJ110CS Datasheet

Current PartRFQ

RAVF164DJT11R0

Stackpole Electronics IncIn Stock: 1158RAVF164DJT11R0 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RP164PJ110CS is determined by strict alignment of the following critical parameters:

Mandatory Matching Parameters:

• Resistance value: 11 Ohms
• Tolerance: ±5%
• Number of resistors: 4
• Circuit type: Isolated
• Temperature coefficient: ±200ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Package / Case: 1206 (3216 Metric), Convex, Long Side Terminals
• Number of pins: 8
• Mounting type: Surface Mount

Allowable Variation:

• Power per element: The substitute part may exceed the original specification (62.5mW minimum requirement)
• Product status: Active status is acceptable for obsolete parts
• Certifications and compliance: Additional qualifications enhance suitability

The RAVF164DJT11R0 from Stackpole Electronics Inc satisfies all mandatory parameters while providing increased power dissipation capability (100mW per element) and automotive-grade qualification (AEC-Q200).

Parameter Comparison

Engineering Selection Recommendations

The RAVF164DJT11R0 is a direct functional substitute for the obsolete RP164PJ110CS. Selection is based on the following engineering criteria:

Electrical Compatibility: All critical electrical parameters match exactly, including resistance value, tolerance, temperature coefficient, and operating temperature range. The increased power rating (100mW versus 62.5mW per element) provides additional thermal margin and does not create incompatibility.

Physical Compatibility: Package dimensions, pin count, and mounting configuration are identical. Both components use 1206 (3216 Metric) convex, long side terminal packages with eight pins for isolated resistor network configuration. Height specifications are within acceptable tolerance.

Compliance and Status: The RAVF164DJT11R0 is an active product with ROHS3 compliance and REACH unaffected status, matching the environmental compliance profile of the original part. The addition of AEC-Q200 automotive qualification provides enhanced reliability assurance.

Availability: The substitute part is currently in stock with higher inventory levels (1073 pieces) compared to the original part (649 pieces), supporting production continuity.

Frequently Asked Questions (FAQ)

Q: Can the RAVF164DJT11R0 be used as a direct replacement for the RP164PJ110CS in existing designs?

A: Yes. The RAVF164DJT11R0 is electrically and mechanically compatible with the RP164PJ110CS. All critical parameters including resistance, tolerance, temperature coefficient, operating range, and package configuration are identical. The substitute part requires no circuit modifications or PCB layout changes.

Q: What is the significance of the higher power rating (100mW versus 62.5mW) on the substitute part?

A: The higher power rating indicates increased thermal dissipation capability. This is a beneficial characteristic that does not create incompatibility. Applications designed for 62.5mW operation will function correctly with the 100mW-rated substitute, with improved thermal performance.

Q: Are there any differences in package dimensions that would affect PCB assembly?

A: No. Both parts use identical 1206 (3216 Metric) packages with convex, long side terminals. Seated heights are 0.61mm (original) and 0.60mm (substitute), representing negligible variation within standard manufacturing tolerances. PCB footprints and assembly processes remain unchanged.

Q: What does the AEC-Q200 qualification on the substitute part indicate?

A: AEC-Q200 is an automotive industry qualification standard for passive components. This certification indicates the RAVF164DJT11R0 meets enhanced reliability and quality requirements for automotive applications. This qualification is an added benefit and does not restrict use in non-automotive applications.

Q: Are both parts RoHS compliant?

A: Yes. Both the RP164PJ110CS and RAVF164DJT11R0 are ROHS3 compliant and REACH unaffected, meeting current environmental regulations for electronic components.

Q: What is the difference between the Samsung RP series and the Stackpole RAVF series?

A: Both are isolated resistor array networks with identical electrical specifications for this particular model. The primary differences are manufacturer, product status (Samsung part is obsolete; Stackpole part is active), and additional automotive qualification on the Stackpole part. Functionally, they are equivalent for the specified 11 Ohm, 4-resistor configuration.

Q: Can the substitute part be used in high-temperature applications?

A: Yes. The RAVF164DJT11R0 operates across the same temperature range as the original part (-55°C to 155°C) with identical temperature coefficient (±200ppm/°C), ensuring consistent performance in high-temperature environments.