RP164PJ100CS Equivalent & Substitute Parts Reference

Part Overview

The RP164PJ100CS is a 4-resistor isolated network array manufactured by Samsung Electro-Mechanics, featuring 10 Ohm resistance elements with ±5% tolerance in a 1206 (3216 Metric) surface mount package. This component is classified as obsolete, necessitating identification of equivalent and substitute parts for ongoing design support and procurement continuity. The part delivers 62.5mW power per element across an operating temperature range of -55°C to 155°C with ±200ppm/°C temperature coefficient stability.

Substiute Parts

RP164PJ100CS

Samsung Electro-MechanicsIn Stock: 938RP164PJ100CS Datasheet

Current PartRFQ

YC164-JR-0710RL

YAGEOIn Stock: 3462YC164-JR-0710RL Datasheet

DirectRFQ

RAVF164DFT10R0

Stackpole Electronics IncIn Stock: 909RAVF164DFT10R0 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RP164PJ100CS are identified based on strict electrical and mechanical parameter alignment. The substitution logic is structured as follows:

Direct Equivalent Substitutes maintain all critical parameters within specified tolerances:

• Resistance value: 10 Ohm
• Number of resistors: 4
• Circuit type: Isolated
• Package: 1206 (3216 Metric), Convex, Long Side Terminals
• Pin count: 8
• Operating temperature range: -55°C ~ 155°C
• Temperature coefficient: ±200ppm/°C
• Regulatory compliance: ROHS3 Compliant, REACH Unaffected

Upgrade Substitutes exceed the original specifications in performance-critical parameters while maintaining full mechanical and electrical compatibility:

• All direct equivalent parameters apply
• Enhanced tolerance or power rating specifications
• Active product status with extended availability

Parameter Comparison

Engineering Selection Recommendations

YC164-JR-0710RL (YAGEO) functions as a direct equivalent substitute for the RP164PJ100CS. This part maintains identical electrical specifications including 10 Ohm resistance, ±5% tolerance, 62.5mW power per element, and ±200ppm/°C temperature coefficient. The component shares the same 1206 package footprint, 8-pin configuration, and operating temperature range. YAGEO's YC164 series holds active product status with significantly higher inventory availability (3400 units), ensuring procurement continuity. Both parts carry ROHS3 compliance and REACH Unaffected status. The maximum seated height of 0.028" (0.70mm) for the YAGEO part represents a 0.004" increase over the Samsung original, which remains within typical PCB assembly tolerances for 1206 components.

RAVF164DFT10R0 (Stackpole Electronics Inc) qualifies as an upgrade substitute, offering enhanced performance specifications while maintaining full mechanical compatibility. This part delivers superior tolerance of ±1% compared to the ±5% specification of the original part, and provides increased power dissipation capability at 100mW per element versus 62.5mW. The RAVF series maintains identical resistance value, circuit topology, pin count, temperature coefficient, and operating temperature range. The component is packaged in the same 1206 (3216 Metric) configuration with 0.024" (0.60mm) maximum seated height, matching the original Samsung part dimensions precisely. Stackpole's active product status and ROHS3/REACH compliance align with regulatory requirements. The upgrade in tolerance and power rating provides design margin for applications requiring enhanced performance stability.

Frequently Asked Questions (FAQ)

Q: Can YC164-JR-0710RL replace RP164PJ100CS in existing designs without PCB modification?

A: Yes. Both parts share identical 1206 (3216 Metric) package footprints, 8-pin configurations, and long side terminal arrangements. The 0.004" difference in maximum seated height (0.028" versus 0.024") falls within standard PCB assembly tolerances and does not require design changes.

Q: What is the primary advantage of RAVF164DFT10R0 over the original RP164PJ100CS?

A: The RAVF164DFT10R0 provides two performance enhancements: tolerance specification of ±1% versus ±5%, and power dissipation capability of 100mW per element versus 62.5mW. These improvements offer greater design margin and stability in applications requiring tighter resistance matching or higher power handling.

Q: Are all three parts compliant with current regulatory standards?

A: Yes. The RP164PJ100CS, YC164-JR-0710RL, and RAVF164DFT10R0 all carry ROHS3 compliance and REACH Unaffected status, meeting current environmental and hazardous substance regulations.

Q: Why is the RP164PJ100CS listed as obsolete?

A: Obsolete status indicates Samsung Electro-Mechanics has discontinued this product line. Active equivalent alternatives from YAGEO and Stackpole Electronics provide continued design support and procurement availability.

Q: Do the substitute parts maintain the same temperature coefficient specification?

A: Yes. Both YC164-JR-0710RL and RAVF164DFT10R0 maintain the ±200ppm/°C temperature coefficient and -55°C to 155°C operating temperature range of the original RP164PJ100CS.

Q: What is the Moisture Sensitivity Level for all three parts?

A: All three parts carry MSL 1 (Unlimited) classification, indicating no moisture sensitivity restrictions for storage, handling, or reflow processes.

Q: Can RAVF164DFT10R0 be used in applications originally designed for RP164PJ100CS?

A: Yes. The RAVF164DFT10R0 maintains full electrical and mechanical compatibility while providing enhanced specifications. The superior tolerance and power rating make it suitable for all applications originally specified for the RP164PJ100CS.