RP104PJ471CS Equivalent & Substitute Parts

Part Overview

The RP104PJ471CS is a 470 Ohm isolated 4-resistor network array manufactured by Samsung Electro-Mechanics. This surface mount component features 62.5mW power per element with ±5% tolerance and ±200ppm/°C temperature coefficient in a 0804 package with convex, long side terminals. The part is active in production status and ROHS3 compliant. Equivalent and substitute parts are identified when applications require alternative sourcing due to inventory constraints, supply chain considerations, or specific qualification requirements such as automotive grade certifications.

Substiute Parts

RP104PJ471CS

Samsung Electro-MechanicsIn Stock: 1205RP104PJ471CS Datasheet

Current PartRFQ

RAVF104DJT470R

Stackpole Electronics IncIn Stock: 1470RAVF104DJT470R Datasheet

DirectRFQ

YC124-JR-07470RL

YAGEOIn Stock: 10751YC124-JR-07470RL Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RP104PJ471CS is permissible when the following parameters remain constant across all candidate parts:

• Resistance value: 470 Ohm
• Tolerance: ±5%
• Number of resistors: 4
• Circuit type: Isolated
• Power per element: 62.5mW
• Temperature coefficient: ±200ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Number of pins: 8
• Package / Case: 0804, Convex, Long Side Terminals
• Mounting type: Surface Mount
• Size / Dimension: 0.079" L x 0.039" W (2.00mm x 1.00mm)
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Variations in packaging format (Cut Tape vs. Tape & Reel), manufacturer, series designation, and height-seated maximum are permitted within substitution logic. Additional qualifications such as automotive grade certifications do not preclude substitution but indicate enhanced qualification status.

Parameter Comparison

Engineering Selection Recommendations

All three parts—RP104PJ471CS, RAVF104DJT470R, and YC124-JR-07470RL—meet identical electrical and mechanical specifications for the 470 Ohm isolated 4-resistor network array in 0804 package format. Selection between these parts is based on the following criteria:

RP104PJ471CS (Samsung Electro-Mechanics): Primary choice when Cut Tape or Digi-Reel® packaging is required. Active production status and ROHS3 compliance confirmed. Suitable for general industrial and consumer applications.

RAVF104DJT470R (Stackpole Electronics Inc): Qualified to automotive grade AEC-Q200 standard. Tape & Reel packaging. Recommended for automotive applications requiring enhanced qualification documentation. Active production status and ROHS3 compliance confirmed.

YC124-JR-07470RL (YAGEO): Qualified to automotive grade AEC-Q200 standard with documented applications in DDRAM and SDRAM systems. Tape & Reel packaging. Highest inventory availability (10,706 pcs). Recommended for high-volume production and automotive applications. Active production status and ROHS3 compliance confirmed.

All parts are REACH unaffected and classified under ECCN EAR99. Height-seated maximum variations (0.45mm, 0.50mm, 0.55mm) are within acceptable tolerances for standard PCB assembly processes.

Frequently Asked Questions (FAQ)

Q: Can RAVF104DJT470R replace RP104PJ471CS in a design?

A: Yes. Both parts share identical electrical specifications (470 Ohm, ±5%, 62.5mW per element, ±200ppm/°C) and mechanical package format (0804, Convex, Long Side Terminals). The primary difference is packaging format (Tape & Reel vs. Cut Tape) and automotive qualification status of RAVF104DJT470R. Electrical and thermal performance are equivalent.

Q: What is the significance of AEC-Q200 qualification on RAVF104DJT470R and YC124-JR-07470RL?

A: AEC-Q200 is an automotive industry qualification standard. Parts bearing this qualification have undergone enhanced testing and validation for automotive applications. If your application does not require automotive-grade components, this qualification does not affect substitution eligibility. If automotive qualification is required, RAVF104DJT470R and YC124-JR-07470RL are appropriate selections.

Q: Are there height differences between these parts that affect PCB assembly?

A: Yes. RP104PJ471CS has a maximum seated height of 0.018" (0.45mm), RAVF104DJT470R is 0.020" (0.50mm), and YC124-JR-07470RL is 0.022" (0.55mm). These variations are within standard PCB assembly tolerances and do not preclude substitution. Verify clearance requirements for your specific PCB layout if height-critical applications are involved.

Q: Which part should I select for high-volume production?

A: YC124-JR-07470RL offers the highest inventory availability (10,706 pcs) and is suitable for high-volume orders. All three parts are active in production and ROHS3 compliant, ensuring long-term supply continuity.

Q: Can I substitute these parts in DDRAM or SDRAM applications?

A: YC124-JR-07470RL is documented for DDRAM and SDRAM applications. RP104PJ471CS and RAVF104DJT470R share identical electrical and mechanical specifications and are functionally equivalent for these applications. Verify application-specific requirements with your system design documentation.

Q: What is the difference between Cut Tape and Tape & Reel packaging?

A: Cut Tape (CT) packaging is supplied in individual strips, suitable for lower-volume orders and manual assembly. Tape & Reel (TR) packaging is supplied on continuous reels, optimized for automated pick-and-place assembly in high-volume production. Electrical and mechanical specifications are identical; packaging format selection depends on assembly process requirements.