RP10-2424SAW-HC Equivalent & Substitute Parts Reference

Part Overview

The Recom Power RP10-2424SAW-HC is an isolated DC-DC converter module designed for ITE (Commercial) applications, delivering a single 24V output at up to 416mA with an input voltage range of 9V to 36V. The converter offers 10W of output power, with integrated features such as overcurrent protection (OCP), overvoltage protection (OVP), short-circuit protection (SCP), and undervoltage lockout (UVLO). The product is classified as obsolete, which requires the identification of compliant and compatible alternative modules for ongoing or new designs.

Substiute Parts

RP10-2424SAW-HC

Recom PowerIn Stock: 1171RP10-2424SAW-HC Datasheet

Current PartRFQ

RP10-2424SAW/XC-HC

Recom PowerIn Stock: 901RP10-2424SAW/XC-HC Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts are grouped strictly according to identical or equivalent parameters relevant to DC-DC converter modules. Key substitution parameters for the RP10-2424SAW-HC include: part type (Isolated Module), number of outputs (1), input voltage range (9V - 36V), output voltage (24V), maximum output current (416mA), power rating (10 W), isolation voltage (1.6 kV), electrical efficiency (90%), operating temperature range (-40°C to 81°C), mounting type (Through Hole), mechanical package and critical compliance data (RoHS, approval agency). Variations only in non-electrical fields like packaging method or minor dimensional differences are considered subordinate to functional and mechanical envelope compatibility.

Parameter Comparison

Engineering Selection Recommendations

Based on the provided data, the direct substitute listed—Recom Power RP10-2424SAW/XC-HC—is functionally and electrically identical to the RP10-2424SAW-HC, meeting the explicit parameters required for substitution in applications reliant on isolated 24V output DC-DC conversion. Both parts share complete RoHS3 compliance and equivalent safety approvals (cURus, EAC). The RP10-2424SAW/XC-HC is in active production and available in tray packaging, supporting ongoing and future inventory requirements.

Frequently Asked Questions (FAQ)

Q1: What parameters must match to qualify as a direct substitute for RP10-2424SAW-HC?
A1: Substitute DC-DC converter modules must match on part type, input/output voltage range, maximum output current, isolation voltage, efficiency, number of outputs, mechanical mounting type, package size/class, and agency approvals.

Q2: Are there any mechanical differences between RP10-2424SAW-HC and RP10-2424SAW/XC-HC that affect compatibility?
A2: Both use a 6-DIP module format with through hole mounting. The RP10-2424SAW/XC-HC has a slightly increased height (16.5mm vs 9.9mm) and specifies 5 leads; envelope fit and pin compatibility should be confirmed with assembly requirements.

Q3: What is the impact of product status on substitute selection?
A3: As RP10-2424SAW-HC is obsolete, only parts with active status and matching compliance/certification are acceptable to maintain design conformance and supply continuity.

Q4: Are both parts compliant with RoHS3 and certified by cURus and EAC?
A4: Yes, both RP10-2424SAW-HC and RP10-2424SAW/XC-HC are ROHS3 compliant with cURus and EAC approvals.

Q5: Is packaging type a relevant substitution criterion for these modules?
A5: Packaging type (e.g., tray) is not a substitutive barrier unless dictated by assembly processes; functional and mechanical parameters are the primary criteria.