Equivalent & Substitute Parts for RP10-1212DE/P

Part Overview

The Recom Power RP10-1212DE/P is an isolated module DC-DC converter with dual ±12V outputs and a power rating of 10W. It features through hole mounting, remote on/off capability, protection features, a 1.6kV isolation rating, and is suitable for ITE (Commercial) applications. The RP10-1212DE/P is part of the POWERLINE RP10-E (10W) series and is currently an active product. Identifying suitable equivalent or substitute parts is necessary for supply chain flexibility, inventory management, or when direct replacements are required due to design constraints or sourcing needs.

Substiute Parts

RP10-1212DE/P

Recom PowerIn Stock: 1118RP10-1212DE/P Datasheet

Current PartRFQ

REC10-1212D/H2/M

Recom PowerIn Stock: 996REC10-1212D/H2/M Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for DC-DC converters are determined strictly by the following key parameters: number of outputs, input voltage range, output voltage levels, maximum output current, total output power, isolation voltage, protection features, application suitability, mounting type, compliance status (RoHS, REACH), and package dimension constraints. Only parts that explicitly match or are within allowable tolerance of these parameters are listed as substitutes.

Parameter Comparison

Engineering Selection Recommendations

Both RP10-1212DE/P and REC10-1212D/H2/M are listed as active devices, with RoHS3 compliance, MSL 1 (Unlimited) rating, and REACH unaffected status. Both are classified under ECCN EAR99 and share the same HTSUS code. Verification of certifications and compliance requirements is satisfied for both products.

Frequently Asked Questions (FAQ)

Q1: What are the critical parameters for substituting DC-DC converters like RP10-1212DE/P?
A1: Key parameters include input voltage range, output voltages, maximum output currents, total output power, isolation voltage, protection features, application suitability, mounting type, and compliance status.

Q2: Are the REC10-1212D/H2/M and RP10-1212DE/P footprint-compatible?
A2: REC10-1212D/H2/M uses a 24-DIP Module package sized at 1.26" x 0.80" x 0.40", while RP10-1212DE/P uses a 6-DIP Module package sized at 2.00" x 1.00" x 0.40". Mechanical compatibility must be determined strictly from these dimensions and pin configuration information.

Q3: Does a substitute require identical protection features?
A3: Substitutes listed are limited to those with protection features provided in the input parameters (OCP, OVP, SCP, UVLO) as relevant.

Q4: Is it necessary to check certifications for substitutes?
A4: Both models are RoHS3 compliant, have MSL 1 rating, and are REACH unaffected, fulfilling environmental and regulatory requirements.

Q5: Do these DC-DC converter substitutes support the same mounting method?
A5: Both RP10-1212DE/P and REC10-1212D/H2/M use through hole mounting as specified.