RNF14FTC127R Equivalent & Substitute Parts

Part Overview

The RNF14FTC127R is a 127 Ohm ±1% metal film axial through-hole resistor rated at 0.25W (1/4W) manufactured by Stackpole Electronics Inc. This component features flame retardant coating and safety-grade construction, designed for applications requiring precision resistance with reliable performance across industrial temperature ranges. The part maintains Active product status with 729 units in current inventory. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility allow direct replacement while maintaining circuit performance and compliance requirements.

Substiute Parts

RNF14FTC127R

Stackpole Electronics IncIn Stock: 816RNF14FTC127R Datasheet

Current PartRFQ

CMF55127R00FHEB

Vishay DaleIn Stock: 1862CMF55127R00FHEB Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

The CMF55127R00FHEB from Vishay Dale qualifies as a substitute for the RNF14FTC127R based on the following alignment of critical electrical and mechanical parameters:

• Identical resistance value: 127 Ohms
• Identical tolerance: ±1%
• Identical temperature coefficient: ±50ppm/°C
• Identical composition: Metal Film
• Identical package type: Axial through-hole
• Identical features: Flame Retardant Coating, Safety construction
• Identical RoHS compliance: ROHS3 Compliant
• Compatible operating temperature range: -55°C ~ 175°C (exceeds original -55°C ~ 155°C)

The primary difference is the power rating upgrade from 0.25W to 0.5W, which represents a functional enhancement rather than a limitation. The substitute maintains all critical electrical characteristics while providing increased thermal headroom.

Parameter Comparison

Engineering Selection Recommendations

The CMF55127R00FHEB is a valid substitute for the RNF14FTC127R in applications where the original part is unavailable or where design requirements permit component changes. Selection between these parts should be based on:

• Circuit power dissipation requirements: The 0.5W rating of the substitute provides additional thermal margin compared to the 0.25W original specification
• Operating temperature environment: The substitute's extended upper temperature limit of 175°C accommodates higher ambient conditions
• Moisture exposure conditions: The substitute's moisture-resistant feature provides enhanced environmental protection
• Mechanical fit: Both components use identical axial package geometry with minimal dimensional variation (0.093" vs 0.090" diameter; 0.250" vs 0.240" length)
• Compliance requirements: Both parts maintain ROHS3 compliance and REACH unaffected status
• Packaging logistics: Original uses Tape & Reel format; substitute uses Cut Tape format

Both parts are Active products with current inventory availability and identical electrical performance at the specified 127 Ohm resistance value.

Frequently Asked Questions (FAQ)

Q: Can the CMF55127R00FHEB directly replace the RNF14FTC127R in existing designs?

A: Yes. Both components share identical resistance (127 Ohms), tolerance (±1%), temperature coefficient (±50ppm/°C), and axial package configuration. The substitute's higher power rating (0.5W vs 0.25W) and extended temperature range represent functional enhancements with no negative impact on circuit operation.

Q: What is the significance of the power rating difference?

A: The substitute's 0.5W rating provides increased thermal capacity. In applications where the original 0.25W resistor operates near its power limit, the substitute offers improved reliability and reduced self-heating effects. If the circuit dissipates less than 0.25W through the resistor, both parts perform identically.

Q: Are the physical dimensions compatible with existing PCB layouts?

A: The components have minimal dimensional variation. The substitute is slightly smaller (0.090" diameter vs 0.093"; 0.240" length vs 0.250"). Both use standard axial lead spacing and will fit existing through-hole footprints without modification.

Q: Do both parts meet the same compliance standards?

A: Yes. Both the RNF14FTC127R and CMF55127R00FHEB are ROHS3 compliant and REACH unaffected, meeting identical regulatory requirements for industrial and commercial applications.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel packaging provides components on continuous carrier tape suitable for automated assembly equipment. Cut Tape provides individual component segments cut from the same carrier tape, typically for manual assembly or smaller volume orders. Both formats contain identical components; packaging format selection depends on assembly process requirements.

Q: Does the moisture-resistant feature of the substitute affect compatibility?

A: No. The moisture-resistant coating on the substitute is an additional protective feature that does not interfere with electrical performance or mechanical compatibility. It provides enhanced environmental protection in humid or moisture-prone applications.