RNF14BAC1K96 Equivalent & Substitute Parts

Part Overview

The RNF14BAC1K96 is a 1.96 kOhms ±0.1% metal film through-hole resistor rated at 0.25W (1/4W) in axial package configuration, manufactured by Stackpole Electronics Inc. This component features flame retardant coating and safety-grade construction, designed for precision applications requiring tight tolerance specifications. The part is currently active in production with 1114 units available in stock. Substitute parts are identified based on matching electrical specifications and mechanical compatibility while accommodating different packaging formats.

Substiute Parts

RNF14BAC1K96

Stackpole Electronics IncIn Stock: 1210RNF14BAC1K96 Datasheet

Current PartRFQ

RNF14BTC1K96

Stackpole Electronics IncIn Stock: 1002RNF14BTC1K96 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The RNF14BTC1K96 qualifies as a direct substitute based on the following matching parameters:

• Resistance value: 1.96 kOhms
• Tolerance: ±0.1%
• Power rating: 0.25W (1/4W)
• Composition: Metal Film
• Temperature coefficient: ±50ppm/°C
• Operating temperature range: -55°C to 155°C
• Physical dimensions: 0.093" Dia x 0.250" L (2.35mm x 6.35mm)
• Axial package configuration
• Manufacturer: Stackpole Electronics Inc (same series RNF)
• Regulatory compliance: ROHS3 Compliant

The only difference between these parts is the packaging format: the main part uses Tape & Box (TB) packaging, while the substitute uses Tape & Reel (TR) packaging. This distinction affects procurement and assembly processes but does not alter electrical or mechanical performance.

Parameter Comparison

Engineering Selection Recommendations

Both the RNF14BAC1K96 and RNF14BTC1K96 are active production components from Stackpole Electronics Inc with identical electrical and mechanical specifications. Selection between these parts should be based on packaging requirements and procurement logistics. The Tape & Box format (RNF14BAC1K96) is suitable for manual assembly and smaller volume applications, while the Tape & Reel format (RNF14BTC1K96) is optimized for automated pick-and-place assembly processes. Both parts maintain ROHS3 compliance and are suitable for applications requiring precision metal film resistors with ±0.1% tolerance in the 1.96 kOhms range.

Frequently Asked Questions (FAQ)

Q: Can RNF14BTC1K96 be used as a direct replacement for RNF14BAC1K96?

A: Yes. Both parts have identical electrical specifications (1.96 kOhms ±0.1%, 0.25W, metal film composition) and mechanical dimensions. The only difference is packaging format (Tape & Reel versus