RNC60H2003FSR36 Equivalent & Substitute Parts

Part Overview

The RNC60H2003FSR36 is a 200 kOhms ±1% 0.25W through-hole resistor in axial configuration, manufactured by Vishay Dale under the military-grade RNC60 series (MIL-PRF-55182/03). This metal film resistor features moisture resistance and weldability, designed for military and high-reliability applications with an operating temperature range of -65°C to 175°C. The part is currently active in production with 821 pieces available in stock. Substitute parts are identified to provide alternative packaging options while maintaining identical electrical and mechanical specifications.

Substiute Parts

RNC60H2003FSR36

Vishay DaleIn Stock: 853RNC60H2003FSR36 Datasheet

Current PartRFQ

RNC60H2003FSRE6

Vishay DaleIn Stock: 1144RNC60H2003FSRE6 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RNC60H2003FSR36 is determined by strict equivalence across the following critical parameters:

• Resistance value: 200 kOhms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Composition: Metal Film
• Temperature coefficient: ±50ppm/°C
• Operating temperature range: -65°C to 175°C
• Package configuration: Axial
• Physical dimensions: 0.097" Dia x 0.280" L (2.46mm x 7.11mm)
• Series compliance: MIL-PRF-55182/03, RNC60
• Failure rate: S (0.001%)

The identified substitute part maintains all electrical and mechanical specifications. The only difference is the packaging format: the main part is supplied in Tape & Reel (TR) configuration, while the substitute is available in Cut Tape (CT) configuration. Both are manufactured by Vishay Dale and carry identical part designations with different packaging suffixes.

Parameter Comparison

Engineering Selection Recommendations

Both the RNC60H2003FSR36 and RNC60H2003FSRE6 are active production parts manufactured by Vishay Dale with identical electrical and mechanical specifications. Selection between these parts should be based on packaging requirements:

• RNC60H2003FSR36 (Tape & Reel): Suitable for high-volume automated assembly operations requiring continuous reel feeding.
• RNC60H2003FSRE6 (Cut Tape): Suitable for lower-volume applications, manual assembly, or situations where individual piece handling is preferred.

Both parts comply with MIL-PRF-55182/03 military specifications and carry the same RoHS non-compliant status. Inventory availability is 821 pieces for the TR format and 1,132 pieces for the CT format.

Frequently Asked Questions (FAQ)

Q: Can RNC60H2003FSRE6 be used as a direct replacement for RNC60H2003FSR36?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Cut Tape versus Tape & Reel). Direct substitution is valid for any application where the packaging format is compatible with assembly equipment or handling procedures.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging supplies components on a continuous reel suitable for automated pick-and-place equipment. Cut Tape (CT) packaging provides components on tape segments, typically in quantities of 10 or more pieces per strip, suitable for manual assembly or lower-volume production.

Q: Are there any electrical performance differences between the two part numbers?

A: No. Both parts have identical resistance (200 kOhms), tolerance (±1%), power rating (0.25W), temperature coefficient (±50ppm/°C), and operating temperature range (-65°C to 175°C).

Q: Do both parts meet the same military specifications?

A: Yes. Both parts comply with MIL-PRF-55182/03 and are part of the RNC60 military-grade resistor series with identical failure rate ratings of S (0.001%).

Q: Which part should be selected for high-volume production?

A: RNC60H2003FSR36 (Tape & Reel) is optimized for high-volume automated assembly. RNC60H2003FSRE6 (Cut Tape) is more suitable for lower-volume or manual assembly applications.