RNC60H2003FSB14 Equivalent & Substitute Parts

Part Overview

The RNC60H2003FSB14 is a 200 kOhms ±1% 0.25W through-hole resistor manufactured by Vishay Dale, designed for military and aerospace applications. This metal film axial resistor features moisture resistance and weldability, meeting MIL-PRF-55182/03 specifications. The part is currently active in production with 1072 units in stock. Substitute parts are identified to provide procurement flexibility while maintaining electrical and mechanical compatibility for applications requiring this specific resistance value and tolerance class.

Substiute Parts

RNC60H2003FSB14

Vishay DaleIn Stock: 1129RNC60H2003FSB14 Datasheet

Current PartRFQ

RNC60H2003FSRE6

Vishay DaleIn Stock: 1144RNC60H2003FSRE6 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RNC60H2003FSB14 is determined by the following critical parameters:

• Resistance Value: 200 kOhms (exact match required)
• Tolerance: ±1% (exact match required)
• Power Rating: 0.25W / 1/4W (exact match required)
• Composition: Metal Film (exact match required)
• Temperature Coefficient: ±50ppm/°C (exact match required)
• Operating Temperature Range: -65°C to 175°C (exact match required)
• Package Type: Axial (exact match required)
• Physical Dimensions: 0.097" Dia × 0.280" L (exact match required)
• Series Compliance: MIL-PRF-55182/03, RNC60 (exact match required)

The identified substitute part RNC60H2003FSRE6 matches all critical electrical and mechanical parameters. The only difference is the packaging format: the main part is supplied in Bulk packaging, while the substitute is supplied in Cut Tape (CT) packaging. Both parts are manufactured by Vishay Dale and share identical electrical specifications, physical dimensions, and military qualification standards.

Parameter Comparison

Engineering Selection Recommendations

Both RNC60H2003FSB14 and RNC60H2003FSRE6 are active production parts manufactured by Vishay Dale with identical electrical performance and military qualification. Selection between these parts should be based on procurement and assembly requirements:

RNC60H2003FSB14 (Bulk packaging) is suitable for high-volume manufacturing environments with automated handling systems and internal tape-and-reel conversion capabilities.

RNC60H2003FSRE6 (Cut Tape packaging) is suitable for applications requiring pre-formatted tape packaging for direct integration into pick-and-place assembly equipment, reducing intermediate processing steps.

Both parts comply with MIL-PRF-55182/03 specifications and carry identical RoHS non-compliant status and EAR99 export classification. Current inventory availability is 1072 units for the bulk variant and 1132 units for the cut tape variant.

Frequently Asked Questions (FAQ)

Q: Can RNC60H2003FSRE6 be used as a direct replacement for RNC60H2003FSB14?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Bulk versus Cut Tape). Substitution is valid for any application where the RNC60H2003FSB14 is specified, provided assembly equipment can accommodate the tape format.

Q: What is the significance of the packaging difference between Bulk and Cut Tape?

A: Bulk packaging supplies loose components, while Cut Tape packaging provides components on continuous carrier tape. Cut Tape is optimized for automated assembly lines using standard pick-and-place equipment. Bulk packaging requires manual handling or internal tape conversion.

Q: Are there any electrical performance differences between these parts?

A: No. Both parts have identical resistance (200 kOhms), tolerance (±1%), power rating (0.25W), temperature coefficient (±50ppm/°C), and operating temperature range (-65°C to 175°C).

Q: Do both parts meet the same military specifications?

A: Yes. Both parts are manufactured to MIL-PRF-55182/03 specifications and are part of the RNC60 military resistor series with identical failure rate classification (S, 0.001%).

Q: What is the physical compatibility between these parts?

A: Both parts have identical axial package dimensions (0.097" Dia × 0.280" L / 2.46mm × 7.11mm) and two terminations. They are physically interchangeable in PCB layouts and through-hole assembly processes.

Q: Are there any compliance or certification differences?

A: Both parts share identical RoHS non-compliant status, EAR99 export classification, and HTSUS code (8533.21.0090). No compliance differences exist between the two variants.