RNC60H2002FSRE7 Equivalent & Substitute Parts

Part Overview

The RNC60H2002FSRE7 is a 20 kOhms ±1% 0.25W through-hole resistor in axial configuration, manufactured by Vishay Dale. This military-grade metal film resistor features moisture resistance and weldability, meeting MIL-PRF-55182/03 specifications. The part is currently active in production with 678 pieces available in stock. Substitute parts are identified to provide alternative sourcing options when the primary packaging format (Tape & Reel) is unavailable or when inventory constraints require alternative procurement channels.

Substiute Parts

RNC60H2002FSRE7

Vishay DaleIn Stock: 727RNC60H2002FSRE7 Datasheet

Current PartRFQ

RNC60H2002FSRE6

Vishay DaleIn Stock: 1378RNC60H2002FSRE6 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of RNC60H2002FSRE7 is determined by equivalence across the following critical parameters:

• Resistance value: 20 kOhms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Composition: Metal Film
• Temperature coefficient: ±50ppm/°C
• Operating temperature range: -65°C to 175°C
• Package configuration: Axial
• Physical dimensions: 0.097" Dia x 0.280" L (2.46mm x 7.11mm)
• Military series compliance: MIL-PRF-55182/03, RNC60
• Features: Military, Moisture Resistant, Weldable

The primary difference between the main part and its substitute is the packaging format: the main part is supplied in Tape & Reel (TR) configuration, while the substitute is available in Cut Tape (CT) configuration. Both parts share identical electrical and mechanical specifications, allowing direct functional substitution in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

Both RNC60H2002FSRE7 and RNC60H2002FSRE6 are active production parts manufactured by Vishay Dale with identical electrical and mechanical specifications. Selection between these parts should be based on packaging requirements and inventory availability:

• RNC60H2002FSRE7 (Tape & Reel) is suitable for automated assembly processes requiring continuous reel feeding.
• RNC60H2002FSRE6 (Cut Tape) is suitable for manual assembly, small-batch production, or applications where reel-based packaging is not required.

Both parts maintain RoHS non-compliant status and are subject to REACH regulations. The identical failure rate (S, 0.001%) and military-grade specifications ensure equivalent reliability performance in circuit applications.

Frequently Asked Questions (FAQ)

Q: Can RNC60H2002FSRE6 be used as a direct replacement for RNC60H2002FSRE7?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Cut Tape versus Tape & Reel). Direct substitution is valid for circuit applications.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging supplies components on continuous reels suitable for automated pick-and-place assembly equipment. Cut Tape (CT) packaging provides components in tape segments, typically used for manual assembly or lower-volume production runs.

Q: Are there any compliance differences between these parts?

A: No. Both parts share identical RoHS status (non-compliant), ECCN classification (EAR99), and HTSUS codes (8533.21.0090). Compliance profiles are equivalent.

Q: What determines substitution eligibility for RNC60H2002FSRE7?

A: Substitution is determined by matching resistance value (20 kOhms), tolerance (±1%), power rating (0.25W), composition (Metal Film), temperature coefficient (±50ppm/°C), operating temperature range (-65°C to 175°C), axial package configuration, and military series compliance (MIL-PRF-55182/03, RNC60).

Q: Is inventory availability a factor in part selection?

A: Inventory levels may influence procurement decisions. RNC60H2002FSRE6 currently has higher stock availability (1310 pieces) compared to RNC60H2002FSRE7 (678 pieces), which may affect lead times and sourcing strategy.