RNC60H2002FSBSL Equivalent & Substitute Parts

Part Overview

The RNC60H2002FSBSL is a 20 kOhms ±1% 0.25W through-hole resistor manufactured by Vishay Dale, classified as a military-grade metal film axial component per MIL-PRF-55182/03. The part is currently active in production with 893 pieces available in bulk packaging. Substitute parts are identified to address packaging availability, inventory levels, and supply chain flexibility while maintaining identical electrical and mechanical specifications.

Substiute Parts

RNC60H2002FSBSL

Vishay DaleIn Stock: 911RNC60H2002FSBSL Datasheet

Current PartRFQ

RNC60H2002FSRE6

Vishay DaleIn Stock: 1378RNC60H2002FSRE6 Datasheet

DirectRFQ

RNC60H2002FSB14

Vishay DaleIn Stock: 2100RNC60H2002FSB14 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RNC60H2002FSBSL are qualified based on strict equivalence across all critical electrical and mechanical parameters. The substitution logic is determined by the following criteria:

Electrical Parameters (Must Match Exactly):

• Resistance value: 20 kOhms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Temperature coefficient: ±50ppm/°C
• Operating temperature range: -65°C to 175°C
• Composition: Metal Film
• Failure rate: S (0.001%)

Mechanical Parameters (Must Match Exactly):

• Package type: Axial
• Physical dimensions: 0.097" Dia × 0.280" L (2.46mm × 7.11mm)
• Number of terminations: 2

Series & Compliance (Must Match):

• Base product number: RNC60
• Military classification: MIL-PRF-55182/03
• Features: Military, Moisture Resistant, Weldable

Substitute parts differ only in packaging format (bulk versus cut tape) and inventory availability, with no variation in electrical performance or physical form factor.

Parameter Comparison

Engineering Selection Recommendations

All three part numbers—RNC60H2002FSBSL, RNC60H2002FSRE6, and RNC60H2002FSB14—are electrically and mechanically identical and maintain active production status. Selection between these parts is determined by packaging and supply requirements:

RNC60H2002FSBSL (Bulk Packaging): Primary specification. Use when bulk quantities are required for manufacturing or assembly operations.

RNC60H2002FSRE6 (Cut Tape Packaging): Direct substitute with identical electrical and mechanical specifications. Use when cut tape format is preferred for automated pick-and-place assembly or when bulk packaging is unavailable. Higher inventory availability (1310 pcs) supports extended lead times.

RNC60H2002FSB14 (Bulk Packaging): Parametric equivalent with highest inventory availability (2000 pcs). Use as secondary bulk source when primary part is unavailable.

All parts comply with MIL-PRF-55182/03 military specifications, feature moisture-resistant construction, and are weldable. RoHS non-compliance status is consistent across all variants. REACH compliance is documented for RNC60H2002FSRE6 and RNC60H2002FSB14.

Frequently Asked Questions (FAQ)

Q: Can RNC60H2002FSRE6 (cut tape) be used in place of RNC60H2002FSBSL (bulk)?

A: Yes. Both parts are electrically and mechanically identical. The difference is packaging format only. Cut tape packaging is suitable for automated assembly processes, while bulk packaging is used for manual assembly or large-volume manufacturing runs.

Q: Are there any electrical performance differences between the three part numbers?

A: No. All three parts share identical resistance value (20 kOhms), tolerance (±1%), power rating (0.25W), temperature coefficient (±50ppm/°C), operating temperature range (-65°C to 175°C), and failure rate (S, 0.001%).

Q: Do the substitute parts fit the same PCB footprint?

A: Yes. All three parts are axial package type with identical physical dimensions (0.097" Dia × 0.280" L / 2.46mm × 7.11mm) and two terminations. They are mechanically interchangeable on the same circuit board layout.

Q: What is the difference between "Direct Substitute" and "Parametric Equivalent"?

A: In this case, both RNC60H2002FSRE6 and RNC60H2002FSB14 are functionally equivalent to the main part. The distinction reflects packaging format: RNC60H2002FSRE6 uses cut tape packaging, while RNC60H2002FSB14 uses bulk packaging. Both maintain identical electrical specifications.

Q: Are all three parts still in active production?

A: Yes. All three part numbers maintain active product status with Vishay Dale.

Q: What is the RoHS compliance status?

A: All three parts are RoHS non-compliant. This is consistent across the RNC60 military series.