RNC55H2003FSRE8 Equivalent & Substitute Parts

Part Overview

The RNC55H2003FSRE8 is a 200 kOhms ±1% 0.125W (1/8W) through-hole resistor in axial package configuration, manufactured by Vishay Dale. This military-grade metal film resistor features moisture resistance and weldability characteristics, meeting MIL-PRF-55182/01 specifications. The part is currently active in production with 763 pieces available in new original stock. Substitute parts are identified when packaging format differs while all critical electrical and mechanical parameters remain identical, enabling procurement flexibility and inventory optimization.

Substiute Parts

RNC55H2003FSRE8

Vishay DaleIn Stock: 855RNC55H2003FSRE8 Datasheet

Current PartRFQ

RNC55H2003FSRE6

Vishay DaleIn Stock: 2539RNC55H2003FSRE6 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of RNC55H2003FSRE8 with RNC55H2003FSRE6 is valid based on identical electrical and mechanical parameters. Both parts share the same base product number (RNC55), resistance value (200 kOhms), tolerance (±1%), power rating (0.125W), composition (metal film), temperature coefficient (±50ppm/°C), operating temperature range (-65°C to 175°C), package type (axial), physical dimensions (0.094" Dia x 0.250" L), number of terminations (2), and failure rate (S, 0.001%). The only difference is packaging format: RNC55H2003FSRE8 is supplied in Tape & Reel (TR) configuration, while RNC55H2003FSRE6 is supplied in Cut Tape (CT) configuration. Both are military-grade, moisture-resistant, and weldable components meeting MIL-PRF-55182/01 specifications.

Parameter Comparison

Engineering Selection Recommendations

Both RNC55H2003FSRE8 and RNC55H2003FSRE6 are active military-grade components from Vishay Dale meeting MIL-PRF-55182/01 specifications. Selection between these parts should be based on procurement and assembly requirements. RNC55H2003FSRE8 in Tape & Reel format is suitable for automated pick-and-place assembly operations. RNC55H2003FSRE6 in Cut Tape format accommodates manual assembly processes or lower-volume production runs. Both parts maintain identical electrical performance, mechanical compatibility, and reliability characteristics. RoHS non-compliance status is consistent across both variants and should be evaluated against application regulatory requirements.

Frequently Asked Questions (FAQ)

Q: Can RNC55H2003FSRE6 be used as a direct replacement for RNC55H2003FSRE8?

A: Yes. Both parts are electrically and mechanically identical, differing only in packaging format (Tape & Reel versus Cut Tape). The component will function identically in the circuit.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging supplies components on continuous tape wound on reels, optimized for automated assembly equipment. Cut Tape (CT) packaging supplies components on tape segments, suitable for manual assembly or lower-volume applications. Both formats contain the same component.

Q: Are there any compatibility issues when switching between these two part numbers?

A: No compatibility issues exist. Physical dimensions, electrical specifications, and mechanical properties are identical. The substitution affects only procurement and handling logistics.

Q: Do both parts meet the same military specifications?

A: Yes. Both RNC55H2003FSRE8 and RNC55H2003FSRE6 comply with MIL-PRF-55182/01 and carry identical military-grade certifications, including moisture resistance and weldability.

Q: What inventory considerations apply to these substitutes?

A: RNC55H2003FSRE8 has 763 pieces in stock, while RNC55H2003FSRE6 has 2470 pieces available. Availability may influence procurement decisions based on project timelines and volume requirements.