RNC55H2003FSRE765 Equivalent & Substitute Parts

Part Overview

The RNC55H2003FSRE765 is a 200 kOhms ±1% 0.125W (1/8W) through-hole resistor in axial configuration, manufactured by Vishay Dale. This military-grade metal film resistor features moisture resistance and weldability, meeting MIL-PRF-55182/01 specifications. The part is currently active in production with 769 pieces available in stock. Substitute parts are identified to address packaging format availability and inventory requirements while maintaining identical electrical and mechanical performance.

Substiute Parts

RNC55H2003FSRE765

Vishay DaleIn Stock: 848RNC55H2003FSRE765 Datasheet

Current PartRFQ

RNC55H2003FSRE6

Vishay DaleIn Stock: 2539RNC55H2003FSRE6 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of RNC55H2003FSRE765 is determined by equivalence in the following critical parameters:

• Resistance value: 200 kOhms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Composition: Metal Film
• Package configuration: Axial
• Temperature coefficient: ±50ppm/°C
• Operating temperature range: -65°C to 175°C
• Physical dimensions: 0.094" Dia x 0.250" L
• Military series compliance: MIL-PRF-55182/01, RNC55

The identified substitute part RNC55H2003FSRE6 maintains all electrical and mechanical specifications. The primary difference is packaging format: the main part is supplied in Tape & Reel (TR) configuration, while the substitute is available in Cut Tape (CT) format. Both parts share identical component specifications and are suitable for direct substitution in applications where packaging format does not impose constraints.

Parameter Comparison

Engineering Selection Recommendations

Both RNC55H2003FSRE765 and RNC55H2003FSRE6 are active production parts manufactured by Vishay Dale with identical electrical specifications and military-grade performance characteristics. Selection between these parts should be based on packaging requirements and inventory availability:

RNC55H2003FSRE765 (Tape & Reel format) is appropriate for high-volume automated assembly operations where tape-fed component handling is standard.

RNC55H2003FSRE6 (Cut Tape format) is suitable for lower-volume applications, manual assembly processes, or situations where individual component handling is required. This variant offers higher current inventory availability at 2470 pieces.

Both parts comply with MIL-PRF-55182/01 military specifications and maintain identical performance across the full operating temperature range of -65°C to 175°C. Neither part is RoHS compliant, consistent with military-grade component standards.

Frequently Asked Questions (FAQ)

Q: Can RNC55H2003FSRE6 be used as a direct replacement for RNC55H2003FSRE765?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format: Tape & Reel versus Cut Tape. Direct substitution is valid provided the receiving assembly process can accommodate the Cut Tape format.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging supplies components on continuous carrier tape wound on a reel, designed for automated pick-and-place assembly equipment. Cut Tape (CT) packaging provides the same components on tape segments of fixed length, suitable for manual handling or lower-volume assembly processes.

Q: Are the physical dimensions identical between substitute parts?

A: Yes. Both RNC55H2003FSRE765 and RNC55H2003FSRE6 share identical axial dimensions of 0.094" diameter by 0.250" length (2.39mm x 6.35mm). PCB footprint and mounting requirements are identical.

Q: Do both parts meet the same military specifications?

A: Yes. Both parts are manufactured to MIL-PRF-55182/01 specifications within the RNC55 military resistor series. Electrical performance, temperature coefficient, failure rate, and environmental characteristics are identical.

Q: What inventory considerations apply to these parts?

A: RNC55H2003FSRE765 has 769 pieces in stock, while RNC55H2003FSRE6 has 2470 pieces available. If extended lead times are a concern, the Cut Tape variant offers significantly higher inventory availability.