RNC55H2003FSRE5 Equivalent & Substitute Parts

Part Overview

The RNC55H2003FSRE5 is a 200 kOhms ±1% 0.125W (1/8W) through-hole resistor in axial configuration, manufactured by Vishay Dale. This military-grade metal film resistor features moisture resistance and weldability, meeting MIL-PRF-55182/01 specifications. The part is currently active in production with 1,045 units in stock. Substitute parts are identified when packaging format differs while all critical electrical and mechanical parameters remain identical, enabling procurement flexibility and supply chain continuity.

Substiute Parts

RNC55H2003FSRE5

Vishay DaleIn Stock: 1135RNC55H2003FSRE5 Datasheet

Current PartRFQ

RNC55H2003FSRE6

Vishay DaleIn Stock: 2539RNC55H2003FSRE6 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The RNC55H2003FSRE5 has one identified substitute: RNC55H2003FSRE6. Substitution eligibility is determined by the following parameters:

• Resistance value: 200 kOhms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Composition: Metal Film
• Temperature coefficient: ±50ppm/°C
• Operating temperature range: -65°C to 175°C
• Package configuration: Axial
• Physical dimensions: 0.094" Dia x 0.250" L (2.39mm x 6.35mm)
• Series compliance: Military, MIL-PRF-55182/01, RNC55
• Failure rate: S (0.001%)

The substitute differs only in packaging format (Cut Tape versus Tape & Reel), which does not affect electrical performance or mechanical compatibility in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

Both RNC55H2003FSRE5 and RNC55H2003FSRE6 are active production parts manufactured by Vishay Dale with identical electrical and mechanical specifications. Selection between these parts should be based on packaging requirements and inventory availability. The RNC55H2003FSRE5 is supplied in Tape & Reel format, suitable for automated assembly processes. The RNC55H2003FSRE6 is supplied in Cut Tape format, suitable for manual assembly or lower-volume applications. Both parts comply with MIL-PRF-55182/01 military specifications and carry identical failure rate classifications. RoHS non-compliance status is consistent across both parts.

Frequently Asked Questions (FAQ)

Q: Can RNC55H2003FSRE6 be used as a direct replacement for RNC55H2003FSRE5?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format: Tape & Reel versus Cut Tape. This distinction affects handling and assembly processes but not circuit performance or component compatibility.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel packaging supplies components on continuous tape wound on reels, optimized for high-speed automated assembly equipment. Cut Tape packaging supplies components on tape segments, suitable for manual assembly, small-batch production, or applications where reel-based handling is not required.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts carry identical military specifications (MIL-PRF-55182/01), failure rate classifications (S, 0.001%), and RoHS status. ECCN and HTSUS classifications are identical.

Q: Which part should be selected for new designs?

A: Selection depends on manufacturing process requirements. For automated assembly lines, Tape & Reel format (RNC55H2003FSRE5) is standard. For manual assembly or prototyping, Cut Tape format (RNC55H2003FSRE6) may be more practical. Both are equally suitable from an electrical performance standpoint.

Q: Is inventory availability a factor in part selection?

A: Inventory levels may influence procurement decisions. RNC55H2003FSRE6 currently has higher stock availability (2,470 units versus 1,045 units). However, both parts are active production items and should be available through normal supply channels.