RNC50H2003FSR36 Equivalent & Substitute Parts

Part Overview

The RNC50H2003FSR36 is a 200 kOhms ±1% metal film axial resistor rated at 0.1W (1/10W) manufactured by Vishay Dale. This component is part of the military-grade RNC50 series, compliant with MIL-PRF-55182/07, and features moisture-resistant, weldable construction suitable for high-reliability applications. The part is currently active in production with 1,045 units in stock. Substitute parts are identified when packaging format differs while maintaining identical electrical and mechanical specifications, enabling procurement flexibility and supply chain optimization.

Substiute Parts

RNC50H2003FSR36

Vishay DaleIn Stock: 1106RNC50H2003FSR36 Datasheet

Current PartRFQ

RNC50H2003FSRE6

Vishay DaleIn Stock: 2315RNC50H2003FSRE6 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RNC50H2003FSR36 is determined by equivalence across the following critical parameters:

• Resistance value: 200 kOhms
• Tolerance: ±1%
• Power rating: 0.1W (1/10W)
• Composition: Metal Film
• Temperature coefficient: ±50ppm/°C
• Operating temperature range: -65°C to 175°C
• Package type: Axial
• Physical dimensions: 0.070" Dia x 0.150" L
• Series compliance: Military, MIL-PRF-55182/07, RNC50
• Failure rate: S (0.001%)

The RNC50H2003FSRE6 qualifies as a parametric equivalent substitute. The sole difference is packaging format: the main part is supplied in Tape & Reel (TR) configuration, while the substitute is supplied in Cut Tape (CT) configuration. Both parts maintain identical electrical performance, mechanical specifications, and military-grade reliability characteristics.

Parameter Comparison

Engineering Selection Recommendations

Both the RNC50H2003FSR36 and RNC50H2003FSRE6 are active production components manufactured by Vishay Dale with identical electrical and mechanical specifications. Selection between these parts is determined by packaging requirements and supply availability:

• RNC50H2003FSR36 (Tape & Reel): Suitable for high-volume automated assembly operations requiring continuous reel feeding. Current inventory: 1,045 units.
• RNC50H2003FSRE6 (Cut Tape): Suitable for lower-volume applications, manual assembly, or situations where individual component handling is required. Current inventory: 2,276 units.

Both parts comply with MIL-PRF-55182/07 military specifications and maintain identical failure rates, temperature performance, and reliability characteristics. Neither part is RoHS compliant; both are classified as RoHS non-compliant. REACH status applies to the RNC50H2003FSRE6 variant.

Frequently Asked Questions (FAQ)

Q: Can RNC50H2003FSRE6 be used as a direct replacement for RNC50H2003FSR36?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Cut Tape versus Tape & Reel). Direct substitution is valid for any application where the packaging format is compatible with assembly equipment and handling procedures.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging supplies components on continuous reels suitable for automated pick-and-place assembly machines. Cut Tape (CT) packaging supplies components on tape segments, typically used for manual assembly, lower-volume production, or component kitting. Both formats contain identical components.

Q: Are there any performance differences between the substitute parts?

A: No. Both parts have identical electrical specifications (200 kOhms ±1%, 0.1W, ±50ppm/°C), mechanical dimensions (0.070" Dia x 0.150" L), operating temperature range (-65°C to 175°C), and military-grade reliability characteristics (Failure Rate S, 0.001%).

Q: What compliance certifications apply to both parts?

A: Both parts comply with MIL-PRF-55182/07 military specifications. Both are RoHS non-compliant. The RNC50H2003FSRE6 is additionally noted as REACH Affected. Both are classified under ECCN EAR99 and HTSUS 8533.21.0090.

Q: Which part should be selected for new designs?

A: Selection depends on manufacturing process requirements. For automated assembly with reel-fed equipment, use RNC50H2003FSR36. For manual assembly or lower-volume production, use RNC50H2003FSRE6. Both are active production parts with adequate inventory.