RN732ATTD3900F50 Equivalent & Substitute Parts Reference

Part Overview

The RN732ATTD3900F50 is a 390 Ohms ±1% thin film chip resistor manufactured by KOA Speer Electronics, Inc., rated at 0.1W (1/10W) in 0805 (2012 Metric) package format. This component features moisture-resistant construction with a temperature coefficient of ±50ppm/°C and operates across -55°C to 155°C. The part is currently classified as obsolete, necessitating identification of functionally equivalent alternatives from active product lines that maintain electrical and mechanical compatibility.

Key Parameters

Parameter	Value	Specification Basis
Resistance Value	390 Ohms	Core electrical specification
Tolerance	±1%	Accuracy classification
Power Rating	0.1W (1/10W)	Thermal dissipation capacity
Package / Case	0805 (2012 Metric)	Physical form factor
Composition	Thin Film	Manufacturing technology
Temperature Coefficient	±50ppm/°C	Stability over temperature range
Operating Temperature Range	-55°C ~ 155°C	Environmental limits
Moisture Sensitivity Level (MSL)	1 (Unlimited)	Handling and storage requirements
RoHS Status	ROHS3 Compliant	Environmental compliance

Substitute Part Grouping Explanation

Substitution eligibility for the RN732ATTD3900F50 is determined by the following mandatory parameters:

Electrical Compatibility Requirements:

Resistance value must equal 390 Ohms
Package / Case must be 0805 (2012 Metric)
Composition must be Thin Film
Operating temperature range must encompass or equal -55°C ~ 155°C
Tolerance must be ±1% or tighter (±0.5%, ±0.1%, ±0.05%)
Power rating must be equal to or greater than 0.1W

Mechanical Compatibility Requirements:

Supplier Device Package must be 0805
Number of Terminations must be 2
Moisture Sensitivity Level must be 1 (Unlimited)

Compliance Requirements:

RoHS3 Compliant status required
REACH Unaffected status required

Substitute parts are grouped into two categories:

Direct Substitutes (Same Power Rating - 0.1W): Parts maintaining the original 0.1W power specification with identical or superior electrical characteristics.

Upgrade Substitutes (Higher Power Rating - 0.125W/1/8W): Parts with increased power dissipation capacity (0.125W) that maintain all other electrical and mechanical compatibility parameters. These provide enhanced thermal margin while preserving form factor and electrical performance.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Temp Coeff (ppm/°C)	Temp Range (°C)	Product Status	Features
RN732ATTD3900F50	KOA Speer	390Ω	±1%	0.1	±50	-55 ~ 155	Obsolete	Moisture Resistant
RN73R2ATTD3900F50	KOA Speer	390Ω	±1%	0.125	±50	-55 ~ 155	Active	Automotive AEC-Q200, Moisture Resistant
CPF0805B390RE1	TE Connectivity	390Ω	±0.1%	0.1	±25	-55 ~ 155	Active	Thin Film
ERA-6AEB391V	Panasonic	390Ω	±0.1%	0.125	±25	-55 ~ 155	Active	Automotive AEC-Q200
ERA-6YEB391V	Panasonic	390Ω	±0.1%	0.125	±25	-55 ~ 125	Obsolete	Metal Film
MCU08050C3900FP500	Vishay Beyschlag	390Ω	±1%	0.125	±50	-55 ~ 155	Active	Anti-Sulfur
MCU08050D3900BP100	Vishay Beyschlag	390Ω	±0.1%	0.125	±25	-55 ~ 125	Active	Anti-Sulfur
MCU08050D3900BP500	Vishay Beyschlag	390Ω	±0.1%	0.125	±25	-55 ~ 125	Active	Anti-Sulfur
RG2012N-391-B-T5	Susumu	390Ω	±0.1%	0.125	±10	-55 ~ 155	Active	Anti-Sulfur, Automotive AEC-Q200
RG2012N-391-D-T5	Susumu	390Ω	±0.5%	0.125	±10	-55 ~ 155	Active	Anti-Sulfur, Automotive AEC-Q200
RG2012N-391-W-T1	Susumu	390Ω	±0.05%	0.125	±10	-55 ~ 155	Active	Anti-Sulfur, Automotive AEC-Q200

Engineering Selection Recommendations

For Direct Replacement (Same Power Rating):

CPF0805B390RE1 (TE Connectivity Passive Product) is the primary direct substitute. This part maintains the 0.1W power specification while offering superior tolerance (±0.1% versus ±1%) and improved temperature coefficient (±25ppm/°C versus ±50ppm/°C). The part is active in production, ROHS3 compliant, and operates across the full -55°C to 155°C temperature range. Selection of this part is appropriate when the original 0.1W specification is a design requirement.

For Upgrade Substitution (Enhanced Power Rating):

Tier 1 - Matched Tolerance & Temperature Coefficient: RN73R2ATTD3900F50 (KOA Speer Electronics, Inc.) provides direct manufacturer continuity with identical tolerance (±1%) and temperature coefficient (±50ppm/°C) while increasing power rating to 0.125W. This part is active, ROHS3 compliant, and includes automotive AEC-Q200 qualification. Selection is appropriate for applications requiring manufacturer consistency and automotive-grade reliability.

Tier 2 - Enhanced Precision & Automotive Qualification: ERA-6AEB391V (Panasonic Electronic Components) and RG2012N-391-B-T5 (Susumu) both offer ±0.1% tolerance with automotive AEC-Q200 qualification. ERA-6AEB391V maintains the full -55°C to 155°C operating range with ±25ppm/°C temperature coefficient. RG2012N-391-B-T5 provides superior temperature coefficient (±10ppm/°C) and anti-sulfur features while maintaining full temperature range. Both are active products suitable for automotive and precision applications.

Tier 3 - Precision & Stability: RG2012N-391-W-T1 (Susumu) offers the tightest tolerance (±0.05%) and lowest temperature coefficient (±10ppm/°C) among all substitutes. This part is active, automotive AEC-Q200 qualified, and anti-sulfur treated. Selection is appropriate for precision measurement circuits and applications requiring maximum stability.

Tier 4 - Anti-Sulfur Technology: MCU08050C3900FP500 (Vishay Beyschlag/Draloric/BC Components) maintains ±1% tolerance and ±50ppm/°C temperature coefficient with anti-sulfur thin film construction. This part is active and suitable for applications in corrosive environments or where sulfur resistance is specified.

Parts to Avoid: ERA-6YEB391V and MCU08050D3900BP100/BP500 are not recommended as primary selections. ERA-6YEB391V is obsolete and has a reduced operating temperature range (-55°C to 125°C). MCU08050D3900BP100 and MCU08050D3900BP500 have restricted upper operating temperature limits (-55°C to 125°C), which does not match the original specification.

Frequently Asked Questions (FAQ)

Q: Can I use a 0.125W (1/8W) rated resistor as a substitute for the original 0.1W (1/10W) specification?

A: Yes. A higher power rating provides increased thermal dissipation capacity and does not degrade circuit performance. The 0.125W rating is a superset of the 0.1W requirement. All upgrade substitutes listed maintain identical resistance value, tolerance, package, and operating temperature range while providing enhanced thermal margin.

Q: What is the difference between tolerance ratings (±1%, ±0.1%, ±0.05%)?

A: Tolerance defines the maximum deviation from the nominal 390 Ohm value. ±1% allows ±3.9 Ohms deviation; ±0.1% allows ±0.39 Ohms deviation; ±0.05% allows ±0.195 Ohms deviation. Tighter tolerances are appropriate for precision circuits, measurement applications, and filter networks where accuracy is critical. Standard tolerance (±1%) is sufficient for general-purpose applications.

Q: What does temperature coefficient (ppm/°C) indicate?

A: Temperature coefficient specifies resistance change per degree Celsius. ±50ppm/°C means the resistance changes by 50 parts per million per degree. Lower values (±25ppm/°C, ±10ppm/°C) indicate better stability across temperature extremes. Selection depends on application sensitivity to resistance drift over the operating temperature range.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All substitute parts listed are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements.

Q: What is the significance of automotive AEC-Q200 qualification?

A: AEC-Q200 is an automotive industry standard qualification indicating the part meets stringent reliability, quality, and performance requirements for automotive applications. Parts with this qualification (RN73R2ATTD3900F50, ERA-6AEB391V, RG2012N-391-B-T5, RG2012N-391-D-T5, RG2012N-391-W-T1) are suitable for automotive and mission-critical applications requiring enhanced reliability assurance.

Q: Can I substitute a metal film resistor (ERA-6YEB391V) for the thin film original?

A: Metal film resistors have different construction and performance characteristics than thin film resistors. ERA-6YEB391V is not recommended as it is obsolete and has a reduced operating temperature range (-55°C to 125°C) compared to the original specification (-55°C to 155°C). Thin film substitutes maintain design consistency.

Q: What is the difference between "Anti-Sulfur" and "Moisture Resistant" features?

A: Moisture resistant construction protects against humidity ingress during storage and handling. Anti-sulfur treatment protects against corrosion from atmospheric sulfur compounds in industrial environments. Both features enhance long-term reliability; selection depends on environmental exposure conditions.

Q: Are there inventory considerations for substitute selection?

A: Yes. Inventory levels vary by part number. CPF0805B390RE1 has 4,901 pieces in stock; ERA-6AEB391V has 8,992 pieces; RG2012N-391-B-T5 has 1,115 pieces. Higher inventory levels may indicate better long-term availability and supply chain stability.

Q: Can I mix different substitute parts in the same circuit?

A: Yes, provided all parts meet the circuit's electrical requirements. However, using identical part numbers throughout a design ensures consistent performance and simplifies procurement, testing, and field service documentation.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message