RN732ATTD3740B25 Equivalent & Substitute Parts

Part Overview

The RN732ATTD3740B25 is a 374 Ohm ±0.1% thin film chip resistor manufactured by KOA Speer Electronics, Inc., rated at 0.1W (1/10W) in 0805 (2012 Metric) package. This part operates across -55°C to 155°C with moisture-resistant construction and ±25ppm/°C temperature coefficient. The product is currently obsolete, necessitating identification of equivalent and substitute components for ongoing design support and procurement continuity.

Key Parameters

Parameter	Value
Resistance	374 Ohms
Tolerance	±0.1%
Power Rating	0.1W (1/10W)
Package	0805 (2012 Metric)
Composition	Thin Film
Temperature Coefficient	±25ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Moisture Sensitivity Level	1 (Unlimited)
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution of the RN732ATTD3740B25 is determined by the following critical parameters:

Primary Substitution Criteria:

Resistance value: 374 Ohms (exact match required)
Tolerance: ±0.1% (exact match required)
Package: 0805 (2012 Metric) (exact match required)
Composition: Thin Film (exact match required)
Temperature Coefficient: ±25ppm/°C (exact match required)
Moisture Sensitivity Level: 1 (Unlimited) (exact match required)

Secondary Compatibility Parameters:

Power rating: Equal or greater than 0.1W
Operating temperature range: Must encompass or equal -55°C ~ 155°C
RoHS compliance: ROHS3 Compliant preferred for regulatory alignment

Substitute parts are categorized as Direct Equivalents (matching all primary criteria at identical power rating) or Upgrades (matching all primary criteria with enhanced power rating or additional certifications).

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Temp Coeff (ppm/°C)	Temp Range (°C)	Package	RoHS Status	Product Status	Substitution Type
RN732ATTD3740B25	KOA Speer Electronics, Inc.	374	±0.1%	0.1	±25	-55 ~ 155	0805	ROHS3 Compliant	Obsolete	Main Part
RN73R2ATTD3740B25	KOA Speer Electronics, Inc.	374	±0.1%	0.125	±25	-55 ~ 155	0805	ROHS3 Compliant	Active	Direct Equivalent
CPF0805B374RE1	TE Connectivity Passive Product	374	±0.1%	0.1	±25	-55 ~ 155	0805	ROHS3 Compliant	Active	Direct Equivalent
TNPW0805374RBETY	Vishay Dale	374	±0.1%	0.125	±25	-55 ~ 125	0805	RoHS non-compliant	Active	Direct Equivalent
7-2176091-7	TE Connectivity Passive Product	374	±0.1%	0.25	±25	-55 ~ 155	0805	ROHS3 Compliant	Active	Upgrade
AT0805BRD07374RL	YAGEO	374	±0.1%	0.125	±25	-55 ~ 155	0805	ROHS3 Compliant	Active	Upgrade
ERA-6AEB3740V	Panasonic Electronic Components	374	±0.1%	0.125	±25	-55 ~ 155	0805	ROHS3 Compliant	Active	Upgrade
MCU08050D3740BP100	Vishay Beyschlag/Draloric/BC Components	374	±0.1%	0.125	±25	-55 ~ 125	0805	ROHS3 Compliant	Active	Upgrade
MCU08050D3740BP500	Vishay Beyschlag/Draloric/BC Components	374	±0.1%	0.125	±25	-55 ~ 125	0805	ROHS3 Compliant	Active	Upgrade
PAT0805E3740BST1	Vishay Dale Thin Film	374	±0.1%	0.2	±25	-55 ~ 155	0805	ROHS3 Compliant	Active	Upgrade
PHP00805E3740BBT1	Vishay Dale Thin Film	374	±0.1%	0.63	±25	-55 ~ 155	0805	RoHS non-compliant	Active	Upgrade

Engineering Selection Recommendations

For Direct Replacement (Identical Electrical Performance):

CPF0805B374RE1 (TE Connectivity Passive Product) is the primary direct equivalent, matching the 0.1W power rating and all electrical specifications of the RN732ATTD3740B25. This part maintains ROHS3 compliance and active product status, ensuring long-term availability and supply chain stability.

For Applications Requiring Enhanced Power Dissipation:

RN73R2ATTD3740B25 (KOA Speer Electronics, Inc.) provides a 0.125W upgrade from the same manufacturer, maintaining design continuity while offering increased thermal headroom. This part retains ROHS3 compliance and active status.

AT0805BRD07374RL (YAGEO) and ERA-6AEB3740V (Panasonic Electronic Components) offer 0.125W ratings with automotive AEC-Q200 certification, suitable for applications requiring automotive-grade reliability. Both maintain ROHS3 compliance and -55°C ~ 155°C operating range.

For Maximum Power Margin Applications:

7-2176091-7 (TE Connectivity Passive Product) provides 0.25W rating with full ROHS3 compliance and -55°C ~ 155°C operating range, suitable for designs requiring significant thermal margin.

PAT0805E3740BST1 (Vishay Dale Thin Film) offers 0.2W rating with automotive AEC-Q200 certification, anti-sulfur construction, and moisture resistance.

Compliance Considerations:

TNPW0805374RBETY (Vishay Dale) and PHP00805E3740BBT1 (Vishay Dale Thin Film) are RoHS non-compliant and should be selected only when legacy compliance requirements or specific design constraints mandate their use.

MCU08050D3740BP100 and MCU08050D3740BP500 (Vishay Beyschlag/Draloric/BC Components) operate at -55°C ~ 125°C, which is narrower than the original -55°C ~ 155°C range and should be verified for temperature-critical applications.

Frequently Asked Questions (FAQ)

Q: Can I use a higher power-rated resistor as a substitute for the RN732ATTD3740B25?

A: Yes. All upgrade parts listed (0.125W, 0.2W, 0.25W, and 0.63W ratings) are electrically compatible substitutes. Higher power ratings provide increased thermal dissipation capability without affecting circuit performance. The 374 Ohm resistance value, ±0.1% tolerance, and ±25ppm/°C temperature coefficient remain identical across all substitutes.

Q: What is the difference between Direct Equivalent and Upgrade classifications?

A: Direct Equivalents match the original 0.1W power rating and all electrical parameters. Upgrades provide enhanced power ratings or additional certifications (such as automotive AEC-Q200 or anti-sulfur features) while maintaining identical electrical specifications. Upgrades are backward-compatible with the original design.

Q: Are all substitute parts physically compatible with the 0805 package footprint?

A: Yes. All substitute parts use the 0805 (2012 Metric) package with identical footprint dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm). Height variations are minimal (0.022" to 0.033" seated height) and do not affect PCB assembly compatibility.

Q: Which substitute should I select for automotive applications?

A: AT0805BRD07374RL (YAGEO) and ERA-6AEB3740V (Panasonic Electronic Components) carry automotive AEC-Q200 certification. PAT0805E3740BST1 (Vishay Dale Thin Film) also provides AEC-Q200 certification with anti-sulfur and moisture-resistant features. All three maintain ROHS3 compliance and -55°C ~ 155°C operating range.

Q: What is the impact of RoHS compliance on part selection?

A: ROHS3-compliant parts (RN73R2ATTD3740B25, CPF0805B374RE1, 7-2176091-7, AT0805BRD07374RL, ERA-6AEB3740V, MCU series, PAT0805E3740BST1) are required for applications subject to EU RoHS Directive 2011/65/EU. TNPW0805374RBETY and PHP00805E3740BBT1 are RoHS non-compliant and restricted to legacy or non-regulated applications.

Q: Does operating temperature range affect substitution compatibility?

A: The original RN732ATTD3740B25 operates -55°C ~ 155°C. Most substitutes maintain this range. MCU08050D3740BP100, MCU08050D3740BP500, and TNPW0805374RBETY operate -55°C ~ 125°C, which is narrower. Verify application temperature requirements before selecting these parts.

Q: Are moisture-resistant features standard across all substitutes?

A: Moisture resistance is explicitly specified for RN732ATTD3740B25, RN73R2ATTD3740B25, AT0805BRD07374RL, PAT0805E3740BST1, and PHP00805E3740BBT1. All parts carry MSL 1 (Unlimited) rating, indicating minimal moisture sensitivity. CPF0805B374RE1, TNPW0805374RBETY, ERA-6AEB3740V, and MCU series do not explicitly list moisture resistance but maintain MSL 1 classification.

Q: What inventory availability should I consider?

A: CPF0805B374RE1 (806 pcs), ERA-6AEB3740V (5313 pcs), and 7-2176091-7 (1487 pcs) offer substantial stock levels. RN73R2ATTD3740B25 (980 pcs), AT0805BRD07374RL (1154 pcs), and MCU series (958-1129 pcs) provide moderate availability. TNPW0805374RBETY (834 pcs) and PAT0805E3740BST1 (823 pcs) offer lower stock. PHP00805E3740BBT1 (690 pcs) has the lowest inventory among active parts.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message