RN732ATTD3012F50 Equivalent & Substitute Parts

Part Overview

The RN732ATTD3012F50 is a 30.1 kOhms ±1% thin film chip resistor manufactured by KOA Speer Electronics, Inc., rated at 0.1W (1/10W) in 0805 (2012 Metric) package format. This part is classified as obsolete, though 1077 pieces remain in stock as new original inventory.

The RN732ATTD3012F50 features moisture-resistant construction with a temperature coefficient of ±50ppm/°C and operates across the temperature range of -55°C to 155°C. It is ROHS3 compliant with MSL 1 (unlimited moisture sensitivity level).

Due to the obsolete product status, equivalent and substitute parts from active manufacturers are necessary for ongoing production, redesigns, and long-term supply chain continuity. Substitute parts must maintain the same resistance value (30.1 kOhms), tolerance (±1%), package format (0805), and core electrical characteristics to ensure direct compatibility in circuit applications.

Key Parameters

Parameter	Value	Specification
Resistance	30.1 kOhms	Exact value required for substitution
Tolerance	±1%	Acceptable tolerance band
Power Rating	0.1W (1/10W)	Minimum power dissipation capability
Package / Case	0805 (2012 Metric)	Physical form factor and footprint
Composition	Thin Film	Resistor construction type
Operating Temperature	-55°C to 155°C	Temperature range capability
Temperature Coefficient	±50ppm/°C	Resistance stability over temperature
RoHS Status	ROHS3 Compliant	Environmental compliance requirement
Moisture Sensitivity Level	MSL 1 (Unlimited)	Moisture handling classification

Substitute Part Grouping Explanation

Substitution logic for the RN732ATTD3012F50 is based strictly on the following criteria:

Primary Substitution Requirements:

Resistance value: 30.1 kOhms (exact match)
Tolerance: ±1% or tighter (±0.5%, ±0.1% acceptable as upgrades)
Package: 0805 (2012 Metric) form factor
Composition: Thin film construction
Operating temperature range: -55°C to 155°C minimum
RoHS3 compliance
MSL 1 classification

Power Rating Consideration: The original part is rated at 0.1W (1/10W). Substitute parts rated at 0.125W (1/8W) or higher are acceptable as they provide equal or greater power dissipation capability. Parts rated at 0.25W (1/4W) are also acceptable upgrades. No substitute part may be rated below 0.1W.

Temperature Coefficient: The original part specifies ±50ppm/°C. Substitute parts with equal or superior (lower) temperature coefficients are acceptable.

Substitutes are organized into two categories:

Direct Substitutes – Parts with identical or equivalent electrical specifications (0.1W or higher power rating, ±1% tolerance or tighter)
Upgrade Substitutes – Parts with enhanced specifications (higher power rating, tighter tolerance, or superior temperature coefficient) that maintain full backward compatibility

All substitute parts listed are active products from established manufacturers with ROHS3 compliance and MSL 1 rating.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Temp Coeff (ppm/°C)	Package	Status	Features
RN732ATTD3012F50	KOA Speer	30.1 kΩ	±1%	0.1	±50	0805	Obsolete	Moisture Resistant
RN73R2ATTD3012F50	KOA Speer	30.1 kΩ	±1%	0.125	±50	0805	Active	Automotive AEC-Q200, Moisture Resistant
RT0805FRE0730K1L	YAGEO	30.1 kΩ	±1%	0.125	±50	0805	Active	Thin Film
AT0805DRE0730K1L	YAGEO	30.1 kΩ	±0.5%	0.125	±50	0805	Active	Anti-Sulfur, Automotive AEC-Q200, Moisture Resistant
CRT0805-FX-3012ELF	Bourns Inc.	30.1 kΩ	±1%	0.125	±15	0805	Active	Current Sense
MCU08050C3012DPW00	Vishay Beyschlag	30.1 kΩ	±0.5%	0.125	±50	0805	Active	Anti-Sulfur
MCU08050C3012FP500	Vishay Beyschlag	30.1 kΩ	±1%	0.125	±50	0805	Active	Anti-Sulfur
RNCF0805BTC30K1	Stackpole Electronics	30.1 kΩ	±0.1%	0.25	±50	0805	Active	Automotive AEC-Q200
RNCF0805DTC30K1	Stackpole Electronics	30.1 kΩ	±0.5%	0.25	±50	0805	Active	Automotive AEC-Q200
RNCF0805FTE30K1	Stackpole Electronics	30.1 kΩ	±1%	0.25	±25	0805	Active	Automotive AEC-Q200
RT0805BRE0730K1L	YAGEO	30.1 kΩ	±0.1%	0.125	±50	0805	Active	Thin Film

Engineering Selection Recommendations

Direct Substitutes (Equivalent Specifications):

The RN73R2ATTD3012F50 (KOA Speer) and RT0805FRE0730K1L (YAGEO) are direct substitutes with active product status. Both maintain ±1% tolerance and 30.1 kOhms resistance in 0805 package. The RN73R2ATTD3012F50 offers automotive AEC-Q200 qualification, while RT0805FRE0730K1L provides high inventory availability (25,753 pieces). Both are ROHS3 compliant with MSL 1 rating.

Upgrade Substitutes (Enhanced Specifications):

For applications requiring tighter tolerance control, AT0805DRE0730K1L (YAGEO, ±0.5%) and MCU08050C3012DPW00 (Vishay, ±0.5%) provide improved accuracy. The RNCF series from Stackpole Electronics offers the highest tolerance grades (±0.1% for RNCF0805BTC30K1) and increased power rating (0.25W), suitable for precision and high-dissipation applications.

CRT0805-FX-3012ELF (Bourns) features a superior temperature coefficient of ±15ppm/°C compared to the original ±50ppm/°C, beneficial for temperature-sensitive circuits.

Automotive Applications:

For automotive-grade requirements, select from parts with AEC-Q200 certification: RN73R2ATTD3012F50, AT0805DRE0730K1L, RNCF0805BTC30K1, RNCF0805DTC30K1, or RNCF0805FTE30K1.

Selection Criteria:

Standard applications: RT0805FRE0730K1L or MCU08050C3012FP500
Automotive applications: RN73R2ATTD3012F50 or RNCF0805FTE30K1
Precision applications: RNCF0805BTC30K1 (±0.1%) or AT0805DRE0730K1L (±0.5%)
High-power applications: RNCF series (0.25W rating)
Temperature-critical applications: CRT0805-FX-3012ELF (±15ppm/°C)

All recommended substitutes are ROHS3 compliant, MSL 1 rated, and maintain the -55°C to 155°C operating temperature range.

Frequently Asked Questions (FAQ)

Q: Can I use a substitute part with higher power rating than the original 0.1W?

A: Yes. A substitute part rated at 0.125W (1/8W) or 0.25W (1/4W) is fully compatible. Higher power rating indicates greater thermal capability and does not affect circuit operation. The part will function identically in the same footprint.

Q: What is the difference between ±1% and ±0.5% tolerance?

A: Tolerance specifies the maximum deviation from the nominal 30.1 kOhms value. ±1% allows deviation up to ±0.301 kOhms, while ±0.5% limits deviation to ±0.1505 kOhms. Tighter tolerance (±0.5% or ±0.1%) provides more precise resistance values, beneficial for precision circuits. All substitute parts with tighter tolerance are backward compatible with ±1% specifications.

Q: Are all substitute parts in the same 0805 package?

A: Yes. All listed substitute parts use the 0805 (2012 Metric) package format with identical footprint dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm). They are directly interchangeable on PCBs designed for the original RN732ATTD3012F50.

Q: What does AEC-Q200 certification mean?

A: AEC-Q200 is an automotive qualification standard ensuring the component meets reliability and performance requirements for automotive applications. Parts with this certification (RN73R2ATTD3012F50, RNCF series) are suitable for automotive-grade designs. Non-certified parts are suitable for general industrial and consumer applications.

Q: Can I substitute the RN732ATTD3012F50 with a part having ±0.1% tolerance?

A: Yes. RNCF0805BTC30K1 with ±0.1% tolerance is a direct upgrade. Tighter tolerance provides superior accuracy and is fully compatible with circuits designed for ±1% tolerance. No circuit modifications are required.

Q: What is the significance of temperature coefficient (ppm/°C)?

A: Temperature coefficient indicates how much the resistance changes with temperature. The original part has ±50ppm/°C, meaning resistance can shift by up to 50 parts per million per degree Celsius. CRT0805-FX-3012ELF offers ±15ppm/°C, providing superior stability in temperature-sensitive applications. Lower temperature coefficient is always an acceptable upgrade.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts are ROHS3 compliant and MSL 1 rated, meeting environmental and moisture handling requirements equivalent to or exceeding the original part.

Q: Which substitute offers the best inventory availability?

A: RT0805FRE0730K1L (YAGEO) has the highest inventory with 25,753 pieces in stock, followed by RNCF0805FTE30K1 (1,113 pieces) and RNCF0805DTC30K1 (1,136 pieces).

Q: Can I use MCU08050C3012DPW00 as a direct replacement?

A: Yes. MCU08050C3012DPW00 is a direct substitute with 30.1 kOhms ±0.5% resistance, 0.125W power rating, and 0805 package. The tighter tolerance is an upgrade that maintains full compatibility.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message