RN732ATTD3012F100 Equivalent & Substitute Parts

Part Overview

The RN732ATTD3012F100 is a 30.1 kOhms ±1% thin film chip resistor manufactured by KOA Speer Electronics, Inc., specified for 0.1W (1/10W) power dissipation in 0805 (2012 Metric) surface-mount package. This part features moisture-resistant construction with a temperature coefficient of ±100ppm/°C and operates across -55°C to 155°C. The product is classified as obsolete, necessitating identification of active equivalent and substitute components that maintain electrical and mechanical compatibility while offering improved availability and product status.

Key Parameters

Parameter	Value
Resistance	30.1 kOhms
Tolerance	±1%
Power Rating	0.1W (1/10W)
Package / Case	0805 (2012 Metric)
Composition	Thin Film
Operating Temperature Range	-55°C ~ 155°C
Temperature Coefficient	±100ppm/°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the RN732ATTD3012F100 is determined by strict adherence to the following electrical and mechanical parameters:

Primary Compatibility Criteria:

Resistance value: 30.1 kOhms
Tolerance: ±1%
Package: 0805 (2012 Metric)
Composition: Thin Film
Operating temperature range: -55°C minimum to 155°C minimum
Moisture Sensitivity Level: 1 (Unlimited)
RoHS3 Compliance

Power Rating Consideration: The original part specifies 0.1W (1/10W). Substitute parts with equal or higher power ratings (0.125W, 0.25W, 0.26W) are electrically compatible, as higher power-rated components can safely operate in applications designed for lower power dissipation without performance degradation.

Temperature Coefficient: The original part specifies ±100ppm/°C. Substitute parts with equal or lower temperature coefficients (±25ppm/°C, ±50ppm/°C) provide improved thermal stability and are functionally compatible.

Substitutes are grouped into two categories:

Direct Substitutes (Same Power Rating or Higher):

RN73R2ATTD3012F100 (KOA Speer, 0.125W, Active)
RT0805FRD0730K1L (YAGEO, 0.125W, Active)
RT0805FRE0730K1L (YAGEO, 0.125W, Active)
CRT0805-FX-3012ELF (Bourns, 0.125W, Active)
MCU08050C3012FP500 (Vishay Beyschlag, 0.125W, Active)
TNPW080530K1FETA (Vishay Dale, 0.125W, Active)

Upgrade Substitutes (Higher Power Rating for Enhanced Margin):

RNCF0805FTE30K1 (Stackpole, 0.25W, Active, AEC-Q200)
RNCP0805FTD30K1 (Stackpole, 0.25W, Active)
TNPW080530K1FEEA (Vishay Dale, 0.26W, Active, AEC-Q200)
TNPW080530K1FHEA (Vishay Dale, 0.26W, Active, AEC-Q200)

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Temp Coeff (ppm/°C)	Temp Range (°C)	Package	Status	RoHS3
RN732ATTD3012F100	KOA Speer	30.1k	±1%	0.1	±100	-55 ~ 155	0805	Obsolete	Yes
RN73R2ATTD3012F100	KOA Speer	30.1k	±1%	0.125	±100	-55 ~ 155	0805	Active	Yes
CRT0805-FX-3012ELF	Bourns	30.1k	±1%	0.125	±15	-55 ~ 155	0805	Active	Yes
MCU08050C3012FP500	Vishay Beyschlag	30.1k	±1%	0.125	±50	-55 ~ 155	0805	Active	Yes
RNCF0805FTE30K1	Stackpole	30.1k	±1%	0.25	±25	-55 ~ 155	0805	Active	Yes
RNCP0805FTD30K1	Stackpole	30.1k	±1%	0.25	±100	-55 ~ 155	0805	Active	Yes
RT0805FRD0730K1L	YAGEO	30.1k	±1%	0.125	±25	-55 ~ 155	0805	Active	Yes
RT0805FRE0730K1L	YAGEO	30.1k	±1%	0.125	±50	-55 ~ 155	0805	Active	Yes
TNPW080530K1FEEA	Vishay Dale	30.1k	±1%	0.26	±25	-55 ~ 175	0805	Active	Yes
TNPW080530K1FETA	Vishay Dale	30.1k	±1%	0.125	±25	-55 ~ 125	0805	Active	No
TNPW080530K1FHEA	Vishay Dale	30.1k	±1%	0.26	±50	-55 ~ 175	0805	Active	Yes

Engineering Selection Recommendations

For Direct Replacement (Equivalent Electrical Performance):

Select from the following active parts when direct substitution with minimal design impact is required:

RN73R2ATTD3012F100 (KOA Speer Electronics) – Maintains identical manufacturer lineage with same temperature coefficient (±100ppm/°C). Includes automotive AEC-Q200 qualification. Product status is active with 894 units in stock.
RT0805FRE0730K1L (YAGEO) – Highest inventory availability (25,753 units). Meets all electrical parameters with ±50ppm/°C temperature coefficient. Active product status ensures long-term supply continuity.
RT0805FRD0730K1L (YAGEO) – Alternative YAGEO option with ±25ppm/°C temperature coefficient for improved thermal stability. 1,005 units available.

For Enhanced Performance (Upgrade Path):

Select from higher power-rated options when thermal margin improvement is beneficial:

RNCF0805FTE30K1 (Stackpole Electronics) – 0.25W rating provides 2.5× power margin over original specification. Includes AEC-Q200 automotive qualification. Lowest temperature coefficient (±25ppm/°C) among all substitutes. Highest inventory (1,113 units).
TNPW080530K1FEEA (Vishay Dale) – 0.26W rating with extended operating temperature to 175°C. Combines automotive AEC-Q200 qualification with anti-sulfur and moisture-resistant features. ROHS3 compliant.

Compliance Verification:

All recommended substitutes maintain ROHS3 compliance and Moisture Sensitivity Level 1 (Unlimited). Operating temperature ranges of all substitutes meet or exceed the original -55°C to 155°C specification. All parts are classified as active products, ensuring availability and manufacturing continuity.

Frequently Asked Questions (FAQ)

Q1: Can I use a 0.125W (1/8W) rated resistor in place of the 0.1W (1/10W) RN732ATTD3012F100?

A: Yes. A higher power-rated component can safely operate in an application designed for lower power dissipation. The 0.125W rating provides adequate margin for the original 0.1W specification. All electrical characteristics (resistance, tolerance, temperature coefficient) remain compatible.

Q2: What is the significance of temperature coefficient differences (±25ppm/°C vs. ±100ppm/°C)?

A: Temperature coefficient defines resistance change per degree Celsius. Lower values (±25ppm/°C) indicate superior thermal stability. For the 30.1 kOhm value, a ±100ppm/°C part changes approximately ±3 ohms per °C across the operating range, while a ±25ppm/°C part changes approximately ±0.75 ohms per °C. Selection depends on circuit tolerance requirements.

Q3: Are automotive-qualified parts (AEC-Q200) suitable for non-automotive applications?

A: Yes. AEC-Q200 qualification indicates enhanced reliability testing and stricter manufacturing controls. These parts exceed standard requirements and are fully compatible with non-automotive applications.

Q4: What is the difference between "Moisture Resistant" and "Anti-Sulfur" features?

A: Moisture Resistant construction protects against humidity ingress. Anti-Sulfur features prevent corrosion from atmospheric sulfur compounds. Both are protective features; their presence indicates enhanced environmental durability. All listed substitutes maintain Moisture Sensitivity Level 1 (Unlimited).

Q5: Why do some substitutes have extended temperature ranges (-55°C to 175°C vs. -55°C to 155°C)?

A: Extended temperature range indicates the component maintains specifications across a wider operating envelope. This provides additional design margin for applications with elevated ambient or self-heating conditions. Extended range parts are fully compatible with circuits designed for the original -55°C to 155°C range.

Q6: Is the TNPW080530K1FETA suitable for new designs requiring ROHS3 compliance?

A: No. TNPW080530K1FETA is marked as RoHS non-compliant. For applications requiring ROHS3 compliance, select from alternatives explicitly marked ROHS3 Compliant.

Q7: What is the practical difference between 0.125W, 0.25W, and 0.26W power ratings in the 0805 package?

A: All three ratings fit the same 0805 (2012 Metric) package footprint. Higher ratings indicate enhanced thermal dissipation capability through improved internal construction. Selection depends on circuit power dissipation requirements. For the original 0.1W specification, any of these ratings provides adequate margin.

Q8: Can I mix different substitute part manufacturers in the same circuit board?

A: Yes. All listed substitutes meet identical electrical specifications (30.1 kOhms ±1%, 0805 package, thin film composition). Mixing manufacturers is electrically and mechanically compatible. Verify procurement and supply chain considerations with your supplier.

Q9: Which substitute offers the best long-term availability?

A: RT0805FRE0730K1L (YAGEO) with 25,753 units in stock and active product status offers the highest immediate availability. RNCF0805FTE30K1 (Stackpole) with 1,113 units and active status provides strong secondary availability with enhanced specifications.

Q10: Are there any height or dimensional constraints I should consider when substituting?

A: All substitutes maintain 0805 (2012 Metric) package dimensions: 0.079" L × 0.049" W (2.00mm × 1.25mm). Maximum seated heights range from 0.022" to 0.026" (0.55mm to 0.65mm). These minor variations are within standard PCB assembly tolerances and do not affect compatibility.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message