RN732ATTD1271B50 Equivalent & Substitute Parts

Part Overview

The RN732ATTD1271B50 is a 1.27 kOhms ±0.1% thin film chip resistor in 0805 (2012 Metric) package rated at 0.1W (1/10W) power dissipation. Manufactured by KOA Speer Electronics, Inc., this component is classified as obsolete. Due to its obsolete status and limited availability relative to active alternatives, equivalent substitute parts from other manufacturers are necessary to ensure design continuity and supply chain reliability.

Key Parameters

Parameter	Value
Resistance	1.27 kOhms
Tolerance	±0.1%
Power Rating	0.1W (1/10W)
Package / Case	0805 (2012 Metric)
Composition	Thin Film
Temperature Coefficient	±50ppm/°C
Operating Temperature Range	-55°C ~ 155°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following mandatory parameters:

Resistance Value: Must be 1.27 kOhms
Tolerance: Must be ±0.1%
Package / Case: Must be 0805 (2012 Metric)
Composition: Must be Thin Film
Operating Temperature Range: Must support -55°C ~ 155°C minimum
RoHS Compliance: Must be ROHS3 Compliant
Moisture Sensitivity Level: Must be 1 (Unlimited)

Substitute parts are grouped into two categories based on power rating compatibility:

Direct Substitutes (0.1W / 1/10W): Parts with identical power rating to the main component.

Upgrade Substitutes (0.125W / 1/8W and higher): Parts with equal or greater power rating, suitable for applications where the original 0.1W rating is sufficient but higher power capability is available.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Temp Coeff (ppm/°C)	Op Temp Range	Features	Status
RN732ATTD1271B50	KOA Speer Electronics	1.27 kΩ	±0.1%	0.1	±50	-55 ~ 155°C	Moisture Resistant	Obsolete
RN73R2ATTD1271B50	KOA Speer Electronics	1.27 kΩ	±0.1%	0.125	±50	-55 ~ 155°C	Automotive AEC-Q200, Moisture Resistant	Active
RT0805BRE071K27L	YAGEO	1.27 kΩ	±0.1%	0.125	±50	-55 ~ 155°C	—	Active
AT0805BRD071K27L	YAGEO	1.27 kΩ	±0.1%	0.125	±25	-55 ~ 155°C	Anti-Sulfur, Automotive AEC-Q200, Moisture Resistant	Active
CPF0805B1K27E1	TE Connectivity Passive Product	1.27 kΩ	±0.1%	0.1	±25	-55 ~ 155°C	—	Active
ERA-6AEB1271V	Panasonic Electronic Components	1.27 kΩ	±0.1%	0.125	±25	-55 ~ 155°C	Automotive AEC-Q200	Active
MCU08050D1271BP100	Vishay Beyschlag/Draloric/BC Components	1.27 kΩ	±0.1%	0.125	±25	-55 ~ 125°C	Anti-Sulfur	Active
MCU08050D1271BP500	Vishay Beyschlag/Draloric/BC Components	1.27 kΩ	±0.1%	0.125	±25	-55 ~ 125°C	Anti-Sulfur	Active
PAT0805E1271BST1	Vishay Dale Thin Film	1.27 kΩ	±0.1%	0.2	±25	-55 ~ 155°C	Anti-Sulfur, Automotive AEC-Q200, Moisture Resistant	Active
PHP00805E1271BST1	Vishay Dale Thin Film	1.27 kΩ	±0.1%	0.63	±25	-55 ~ 155°C	Flame Proof, Moisture Resistant, Safety	Active

Engineering Selection Recommendations

For Direct Replacement (0.1W Power Rating)

CPF0805B1K27E1 from TE Connectivity Passive Product is the primary direct substitute. It maintains the 0.1W power rating of the original component while offering active product status and ROHS3 compliance. The temperature coefficient is improved at ±25ppm/°C compared to the original ±50ppm/°C.

For Upgrade Applications (0.125W and Higher Power Ratings)

RN73R2ATTD1271B50 from KOA Speer Electronics provides continuity within the same manufacturer family while upgrading to 0.125W and adding Automotive AEC-Q200 certification. This option is suitable when higher power dissipation capability is acceptable.

ERA-6AEB1271V from Panasonic Electronic Components offers the highest inventory availability (17,729 pcs) with 0.125W rating and Automotive AEC-Q200 certification. Temperature coefficient is ±25ppm/°C.

AT0805BRD071K27L from YAGEO combines 0.125W power rating with Anti-Sulfur, Automotive AEC-Q200, and Moisture Resistant features, with improved ±25ppm/°C temperature coefficient.

For High-Power Applications

PAT0805E1271BST1 from Vishay Dale Thin Film provides 0.2W (1/5W) power rating with Anti-Sulfur, Automotive AEC-Q200, and Moisture Resistant features, maintaining full -55°C ~ 155°C operating range.

PHP00805E1271BST1 from Vishay Dale Thin Film offers the highest power rating at 0.63W (5/8W) with Flame Proof, Moisture Resistant, and Safety features for demanding applications.

Temperature Range Consideration

MCU08050D1271BP100 and MCU08050D1271BP500 from Vishay operate to 125°C maximum, which is 30°C lower than the original specification. These are suitable only for applications not requiring the full -55°C ~ 155°C range.

Frequently Asked Questions (FAQ)

Q: Can I use a substitute part with higher power rating than the original 0.1W?

A: Yes. A higher power rating is a safe upgrade provided all other parameters (resistance, tolerance, package, composition, operating temperature range, and compliance) match. The component will function identically in the circuit while providing additional thermal margin.

Q: What is the difference between the RN73R2ATTD1271B50 and the original RN732ATTD1271B50?

A: Both are from KOA Speer Electronics with identical resistance (1.27 kΩ) and tolerance (±0.1%). The RN73R2ATTD1271B50 upgrades the power rating from 0.1W to 0.125W and adds Automotive AEC-Q200 certification. The original is obsolete; the RN73R2 is active.

Q: Why do some substitutes have ±25ppm/°C temperature coefficient instead of ±50ppm/°C?

A: A lower temperature coefficient (±25ppm/°C) represents improved stability across temperature variations. This is a performance upgrade and is fully compatible with applications designed for the original ±50ppm/°C specification.

Q: Are all substitute parts ROHS3 compliant?

A: All listed substitutes except PHP00805E1271BBT1 are ROHS3 compliant. PHP00805E1271BBT1 is RoHS non-compliant and should be avoided for applications requiring RoHS compliance. PHP00805E1271BST1 is the compliant variant of the same series.

Q: What does Automotive AEC-Q200 certification mean?

A: AEC-Q200 is an automotive qualification standard for passive components. Parts with this certification meet stringent reliability and performance requirements for automotive applications. This certification is optional for general industrial use but required for automotive designs.

Q: Can I substitute MCU08050D1271BP parts if my application requires -55°C ~ 155°C operation?

A: No. MCU08050D1271BP parts are rated only to 125°C maximum, which is 30°C below the original specification. Use these only if your application maximum temperature does not exceed 125°C.

Q: What is the difference between MCU08050D1271BP100 and MCU08050D1271BP500?

A: Both parts are electrically and mechanically identical. The difference is in packaging quantity: BP100 indicates 100-piece packaging, and BP500 indicates 500-piece packaging. Select based on your procurement volume requirements.

Q: Is the 0805 package dimension identical across all substitutes?

A: The 0805 (2012 Metric) package is standardized at 0.079" L × 0.049" W (2.00mm × 1.25mm). All listed substitutes use this package. Height varies slightly (0.022" to 0.033" seated maximum), which is within PCB assembly tolerances and does not affect functionality.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message