RN731ETTP2582C25 Equivalent & Substitute Parts

Part Overview

The RN731ETTP2582C25 is a 25.8 kOhms ±0.25% thin film chip resistor in 0402 (1005 Metric) package rated at 0.063W (1/16W) power dissipation. This component is manufactured by KOA Speer Electronics, Inc. and is currently classified as obsolete. Due to its obsolete status, identifying compatible substitute parts is necessary to maintain design continuity and ensure supply chain availability for new production runs or replacement applications.

Substiute Parts

RN731ETTP2582C25

KOA Speer Electronics, Inc.In Stock: 1123RN731ETTP2582C25 Datasheet

Current PartRFQ

RN73R1ETTP2582C25

KOA Speer Electronics, Inc.In Stock: 905RN73R1ETTP2582C25 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RN731ETTP2582C25 is determined by strict equivalence across the following critical parameters:

• Resistance value: 25.8 kOhms
• Tolerance: ±0.25%
• Power rating: 0.063W (1/16W)
• Package: 0402 (1005 Metric)
• Composition: Thin Film
• Temperature coefficient: ±25ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Moisture resistance capability
• RoHS3 compliance

The substitute part RN73R1ETTP2582C25 meets all these electrical and mechanical parameters. The primary distinction is that the substitute part carries AEC-Q200 automotive qualification, which represents an additional certification level rather than a deviation from the base specifications.

Parameter Comparison

Engineering Selection Recommendations

The RN73R1ETTP2582C25 is the direct substitute for the obsolete RN731ETTP2582C25. Both parts are manufactured by KOA Speer Electronics, Inc. and share identical electrical specifications, mechanical dimensions, and environmental ratings.

The substitute part carries active product status, ensuring ongoing availability and supply chain support. The addition of AEC-Q200 automotive qualification on the substitute part represents enhanced quality assurance and reliability testing, making it suitable for applications requiring automotive-grade components without compromising performance in non-automotive applications.

Both parts maintain ROHS3 compliance and unlimited moisture sensitivity level (MSL 1), confirming compatibility in standard manufacturing and storage environments.

Frequently Asked Questions (FAQ)

Q: Can RN73R1ETTP2582C25 be used as a direct replacement for RN731ETTP2582C25?

A: Yes. Both parts share identical resistance value (25.8 kOhms), tolerance (±0.25%), power rating (0.063W), package (0402), composition (thin film), temperature coefficient (±25ppm/°C), and operating temperature range (-55°C ~ 155°C). The substitute part is active and available, whereas the main part is obsolete.

Q: What is the significance of AEC-Q200 qualification on the substitute part?

A: AEC-Q200 is an automotive industry standard qualification that certifies component reliability under automotive operating conditions. This certification does not restrict use in non-automotive applications; it indicates additional quality assurance and testing protocols have been applied.

Q: Are the physical dimensions identical between the two parts?

A: Yes. Both parts use the 0402 (1005 Metric) package with identical dimensions: 0.039" L x 0.020" W (1.00mm x 0.50mm) and maximum seated height of 0.016" (0.40mm).

Q: Do both parts have the same moisture sensitivity level?

A: Yes. Both parts are rated MSL 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.

Q: Is there any difference in RoHS compliance between the two parts?

A: No. Both parts are ROHS3 compliant and REACH unaffected, meeting the same environmental and regulatory standards.