RN70D2001FRE6 Equivalent & Substitute Parts

Part Overview

The RN70D2001FRE6 is a 2 kOhms ±1% metal film axial resistor rated at 0.75W (3/4W) manufactured by Vishay Dale. This component is part of the military-grade RN70 series, featuring flame retardant coating, moisture resistance, and safety certification per MIL-R-10509/3. The part is currently active in production with 1103 units in stock. Substitute parts are identified when packaging or inventory requirements necessitate alternative sourcing while maintaining identical electrical and mechanical specifications.

Substiute Parts

RN70D2001FRE6

Vishay DaleIn Stock: 1169RN70D2001FRE6 Datasheet

Current PartRFQ

RN70D2001FB14

Vishay DaleIn Stock: 985RN70D2001FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The RN70D2001FB14 qualifies as a direct substitute for the RN70D2001FRE6 based on the following criteria:

• Identical resistance value: 2 kOhms
• Identical tolerance: ±1%
• Identical power rating: 0.75W (3/4W)
• Identical composition: Metal Film
• Identical temperature coefficient: ±100ppm/°C
• Identical operating temperature range: -65°C to 175°C
• Identical package type: Axial
• Identical physical dimensions: 0.180" Dia × 0.562" L (4.57mm × 14.27mm)
• Identical series classification: Military, MIL-R-10509/3, RN70
• Identical features: Flame Retardant Coating, Military, Moisture Resistant, Safety

The only difference between these parts is the packaging format: RN70D2001FRE6 is supplied in Tape & Reel (TR) format, while RN70D2001FB14 is supplied in Bulk format. Both parts maintain identical electrical performance and mechanical specifications.

Parameter Comparison

Engineering Selection Recommendations

Both RN70D2001FRE6 and RN70D2001FB14 are active production components from Vishay Dale with identical electrical and mechanical specifications. Selection between these parts should be based on packaging requirements and inventory availability:

• RN70D2001FRE6 (Tape & Reel format) is suitable for automated assembly processes requiring continuous tape feeding
• RN70D2001FB14 (Bulk format) is suitable for manual assembly or applications where tape packaging is not required

Both parts maintain RoHS non-compliant status and REACH Affected classification. Both are subject to EAR99 export control classification. No compliance or certification differences exist between these alternatives.

Frequently Asked Questions (FAQ)

Q: Can RN70D2001FB14 be used as a direct replacement for RN70D2001FRE6?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Bulk vs. Tape & Reel). Substitution is valid for any application where the RN70D2001FRE6 is specified, provided the packaging format is compatible with your assembly process.

Q: What is the difference between Tape & Reel and Bulk packaging?

A: Tape & Reel (TR) packaging supplies components on a continuous carrier tape suitable for automated pick-and-place assembly equipment. Bulk packaging supplies loose components in a container, typically used for manual assembly or lower-volume applications.

Q: Are the electrical specifications identical between these parts?

A: Yes. Both parts have identical resistance (2 kOhms), tolerance (±1%), power rating (0.75W), temperature coefficient (±100ppm/°C), and operating temperature range (-65°C to 175°C).

Q: Are the physical dimensions the same?

A: Yes. Both parts have identical axial package dimensions of 0.180" diameter × 0.562" length (4.57mm × 14.27mm).

Q: Do both parts meet the same military specifications?

A: Yes. Both parts are manufactured to MIL-R-10509/3 military specifications and include identical features: flame retardant coating, moisture resistance, and safety certification.

Q: Which part should I select if inventory is a concern?

A: RN70D2001FRE6 currently has 1103 units in stock, while RN70D2001FB14 has 886 units in stock. Selection should be based on your assembly process requirements (automated vs. manual) and packaging compatibility.