RN70D10R0FRE6 Equivalent & Substitute Parts

Part Overview

The RN70D10R0FRE6 is a 10 Ohm, 0.75W metal film axial resistor manufactured by Vishay Dale, designed for military applications per MIL-R-10509/3 specifications. This component features flame retardant coating, moisture resistance, and safety-rated construction suitable for high-reliability electronic assemblies. The part is currently active in production with 1058 units in stock. Substitute parts are identified to provide packaging flexibility and supply chain alternatives while maintaining identical electrical and mechanical performance.

Substiute Parts

RN70D10R0FRE6

Vishay DaleIn Stock: 1076RN70D10R0FRE6 Datasheet

Current PartRFQ

RN70D10R0FB14

Vishay DaleIn Stock: 1126RN70D10R0FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RN70D10R0FRE6 is based on strict equivalence across all critical electrical and mechanical parameters. The substitute part RN70D10R0FB14 maintains identical specifications in resistance value, tolerance, power rating, temperature coefficient, operating temperature range, composition, physical dimensions, and military series designation. The only difference between these parts is packaging format: the main part is supplied in Tape & Reel (TR) configuration, while the substitute is supplied in Bulk packaging. Both parts are manufactured by Vishay Dale under the same RN70 base product number and meet identical MIL-R-10509/3 military standards.

Substitution is valid when packaging format does not constrain the application requirement. Electrical performance, thermal characteristics, reliability features, and compliance certifications remain unchanged between these variants.

Parameter Comparison

Engineering Selection Recommendations

Both the RN70D10R0FRE6 and RN70D10R0FB14 are active production parts with identical electrical specifications and military qualification. Selection between these parts depends solely on packaging requirements and assembly process compatibility.

The RN70D10R0FRE6 in Tape & Reel format is suitable for automated pick-and-place assembly operations and high-volume production environments where component feeding systems require reel-based packaging.

The RN70D10R0FB14 in Bulk packaging is appropriate for manual assembly, low-volume production, repair operations, or applications where reel packaging is not required.

Both parts carry identical RoHS non-compliant and REACH Affected designations, reflecting their military-grade composition and construction. Compliance requirements must be evaluated at the system level based on end-use application and regulatory jurisdiction.

Frequently Asked Questions (FAQ)

Q: Can RN70D10R0FB14 be used as a direct replacement for RN70D10R0FRE6?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Bulk versus Tape & Reel). Direct substitution is valid provided the assembly process can accommodate Bulk packaging.

Q: What is the difference between Tape & Reel and Bulk packaging?

A: Tape & Reel packaging supplies components wound on a continuous reel with carrier tape, designed for automated assembly equipment. Bulk packaging supplies loose components in a container, suitable for manual assembly or non-automated processes.

Q: Are the electrical specifications identical between these parts?

A: Yes. Resistance value, tolerance, power rating, temperature coefficient, operating temperature range, and composition are identical. Both parts meet MIL-R-10509/3 military specifications.

Q: Do these parts have the same physical dimensions?

A: Yes. Both parts measure 0.180" diameter by 0.562" length (4.57mm × 14.27mm) and use identical axial package construction.

Q: What compliance certifications apply to both parts?

A: Both parts are RoHS non-compliant and REACH Affected. These designations reflect the military-grade materials and construction required for MIL-R-10509/3 compliance.

Q: Can I mix these parts in the same assembly?

A: Yes, provided your assembly process can handle both packaging formats. Electrical and mechanical performance are identical, so mixed usage does not affect circuit functionality or reliability.