RN70C1000FRE6 Equivalent & Substitute Parts

Part Overview

The RN70C1000FRE6 is a 100 Ohms ±1% 0.75W through-hole resistor manufactured by Vishay Dale, featuring metal film construction with flame retardant coating. This component is designed for military applications per MIL-R-10509/3 specification and is currently in active production status. Substitute parts are identified to provide alternative sourcing options while maintaining electrical and mechanical compatibility for circuit applications requiring this resistance value and power rating.

Substiute Parts

RN70C1000FRE6

Vishay DaleIn Stock: 789RN70C1000FRE6 Datasheet

Current PartRFQ

RN70C1000FB14

Vishay DaleIn Stock: 772RN70C1000FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RN70C1000FRE6 is determined by strict equivalence across the following critical parameters:

• Resistance value: 100 Ohms
• Tolerance: ±1%
• Power rating: 0.75W
• Composition: Metal Film
• Package configuration: Axial
• Temperature coefficient: ±50ppm/°C
• Operating temperature range: -65°C to 175°C
• Physical dimensions: 0.180" Dia x 0.562" L
• Series compliance: RN70 military series

The identified substitute part maintains identical electrical specifications and mechanical form factor. Packaging format (Tape & Reel versus Bulk) represents the only variation and does not affect component functionality or circuit performance.

Parameter Comparison

Engineering Selection Recommendations

Both the RN70C1000FRE6 and RN70C1000FB14 are active production components from Vishay Dale with identical electrical and mechanical specifications. Selection between these parts is determined by procurement and assembly requirements rather than technical performance criteria.

The RN70C1000FRE6 in Tape & Reel packaging is suitable for automated assembly processes and high-volume production environments. The RN70C1000FB14 in Bulk packaging accommodates manual assembly, prototype development, or applications where reel packaging is not required.

Both components maintain RoHS non-compliant and REACH Affected status. Compliance requirements for specific applications must be evaluated independently of substitution eligibility.

Frequently Asked Questions (FAQ)

Q: Can RN70C1000FB14 be used as a direct replacement for RN70C1000FRE6?

A: Yes. Both components are electrically and mechanically identical. The only difference is packaging format (Bulk versus Tape & Reel). Substitution is valid for any circuit application where the RN70C1000FRE6 is specified.

Q: Does packaging format affect component performance?

A: No. Packaging format (Tape & Reel or Bulk) is a supply and handling specification only. It does not affect electrical performance, reliability, or circuit functionality.

Q: Are there any compliance differences between these parts?

A: No. Both parts share identical RoHS and REACH status. Compliance evaluation must be performed at the system level based on application requirements.

Q: What determines substitution eligibility for RN70 series resistors?

A: Substitution requires matching of resistance value, tolerance, power rating, composition, package type, temperature coefficient, operating temperature range, and physical dimensions. All these parameters are identical between RN70C1000FRE6 and RN70C1000FB14.

Q: Can these parts be used interchangeably in military applications?

A: Both components comply with MIL-R-10509/3 specification and are rated for military applications. Interchangeability is confirmed for military circuit designs.