RN65E1002FRE6 Equivalent & Substitute Parts

Part Overview

The RN65E1002FRE6 is a 10 kOhms ±1% metal film through-hole resistor rated at 0.5W (1/2W) in axial package configuration. Manufactured by Vishay Dale under the military-grade RN65 series (MIL-R-10509/2), this component features flame retardant coating, moisture resistance, and safety-rated construction suitable for military and high-reliability applications. The part is currently active in production with 746 units in stock. Substitute parts may be required due to packaging availability, inventory constraints, or specific procurement requirements while maintaining identical electrical and mechanical performance.

Substiute Parts

RN65E1002FRE6

Vishay DaleIn Stock: 795RN65E1002FRE6 Datasheet

Current PartRFQ

RN65E1002FB14

Vishay DaleIn Stock: 944RN65E1002FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RN65E1002FRE6 is determined by strict equivalence across the following critical parameters:

• Resistance value: 10 kOhms
• Tolerance: ±1%
• Power rating: 0.5W (1/2W)
• Composition: Metal Film
• Package type: Axial
• Temperature coefficient: ±25ppm/°C
• Operating temperature range: -65°C to 175°C
• Physical dimensions: 0.180" Dia x 0.562" L (4.57mm x 14.27mm)
• Series compliance: MIL-R-10509/2, RN65

The primary difference between the main part and its substitute is packaging format: the RN65E1002FRE6 is supplied in Tape & Reel (TR) configuration, while the substitute RN65E1002FB14 is supplied in Bulk packaging. Both parts are manufactured by Vishay Dale and share identical electrical specifications and physical dimensions.

Parameter Comparison

Engineering Selection Recommendations

Both the RN65E1002FRE6 and RN65E1002FB14 are active production components manufactured by Vishay Dale with identical electrical and mechanical specifications. Selection between these parts should be based on packaging requirements and procurement logistics:

• RN65E1002FRE6 (Tape & Reel): Suitable for automated assembly processes and high-volume production environments requiring continuous reel feeding.
• RN65E1002FB14 (Bulk): Suitable for manual assembly, low-volume applications, or procurement scenarios where bulk packaging is preferred.

Both parts maintain equivalent compliance status: RoHS non-compliant and REACH Affected. No functional or performance differences exist between these alternatives when applied to identical circuit requirements.

Frequently Asked Questions (FAQ)

Q: Can RN65E1002FB14 be used as a direct replacement for RN65E1002FRE6?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Bulk versus Tape & Reel). Substitution is valid for any application where the RN65E1002FRE6 is specified, provided packaging logistics are compatible with your assembly process.

Q: What is the significance of the packaging difference between TR and Bulk formats?

A: Tape & Reel (TR) packaging is optimized for automated pick-and-place assembly systems, while Bulk packaging is used for manual assembly or applications where continuous reel feeding is not required. The components themselves are identical.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts share identical RoHS and REACH compliance status. Both are RoHS non-compliant and REACH Affected. Military-grade specifications (MIL-R-10509/2) apply equally to both variants.

Q: What are the critical parameters that must match for substitution?

A: Resistance value (10 kOhms), tolerance (±1%), power rating (0.5W), composition (Metal Film), package type (Axial), temperature coefficient (±25ppm/°C), operating temperature range (-65°C to 175°C), and physical dimensions (0.180" Dia x 0.562" L) must all remain constant for valid substitution.

Q: Can these parts be used interchangeably in military or high-reliability applications?

A: Yes. Both parts comply with the MIL-R-10509/2 military specification and carry identical feature sets including flame retardant coating, moisture resistance, and safety ratings. Substitution does not compromise military or high-reliability application requirements.