RN65E1001FRE6 Equivalent & Substitute Parts

Part Overview

The RN65E1001FRE6 is a 1 kOhms ±1% metal film through-hole resistor rated at 0.5W (1/2W) in axial package configuration. Manufactured by Vishay Dale under the military-grade RN65 series per MIL-R-10509/2 specification, this component features flame retardant coating, moisture resistance, and safety-rated construction suitable for military and high-reliability applications. The part maintains active product status with 750 units currently in stock. Substitute parts are identified when packaging format differs while maintaining identical electrical and mechanical specifications, ensuring functional equivalence in circuit applications.

Substiute Parts

RN65E1001FRE6

Vishay DaleIn Stock: 797RN65E1001FRE6 Datasheet

Current PartRFQ

RN65E1001FB14

Vishay DaleIn Stock: 1178RN65E1001FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RN65E1001FRE6 is determined by strict equivalence across the following parameters: resistance value (1 kOhms), tolerance (±1%), power rating (0.5W), composition (metal film), temperature coefficient (±25ppm/°C), operating temperature range (-65°C to 175°C), package type (axial), physical dimensions (0.180" Dia × 0.562" L), series designation (RN65, MIL-R-10509/2), and feature set (flame retardant coating, military grade, moisture resistant, safety rated). The RN65E1001FB14 qualifies as a direct substitute based on complete alignment with these electrical and mechanical parameters. The only distinction between the main part and substitute is packaging format: the RN65E1001FRE6 is supplied in Tape & Reel (TR) configuration, while the RN65E1001FB14 is supplied in Bulk packaging. Both parts share identical component specifications and performance characteristics.

Parameter Comparison

Engineering Selection Recommendations

Both the RN65E1001FRE6 and RN65E1001FB14 maintain active product status and are manufactured to identical electrical and mechanical specifications. Selection between these parts is determined by packaging and supply chain requirements rather than functional performance. The RN65E1001FRE6 in Tape & Reel format is suitable for automated assembly processes and high-volume production environments. The RN65E1001FB14 in Bulk packaging accommodates manual assembly, prototype development, and applications where component quantities do not justify automated handling. Both parts comply with MIL-R-10509/2 military specifications and share identical RoHS non-compliant and REACH Affected regulatory status. Component selection should be based on assembly methodology, inventory management practices, and procurement logistics.

Frequently Asked Questions (FAQ)

Q: Can RN65E1001FB14 be used as a direct replacement for RN65E1001FRE6?

A: Yes. Both parts are electrically and mechanically identical. The RN65E1001FB14 qualifies as a direct substitute. The only difference is packaging format: Tape & Reel versus Bulk. Functional performance in circuit applications is equivalent.

Q: What is the primary difference between these two part numbers?

A: The RN65E1001FRE6 is supplied in Tape & Reel (TR) packaging, optimized for automated pick-and-place assembly. The RN65E1001FB14 is supplied in Bulk packaging, suitable for manual assembly and component kitting. Electrical specifications are identical.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts share identical RoHS non-compliant status, REACH Affected designation, and military-grade MIL-R-10509/2 certification. Regulatory and compliance profiles are equivalent.

Q: Which part should be selected for high-volume automated assembly?

A: The RN65E1001FRE6 in Tape & Reel format is optimized for automated assembly processes and high-volume production environments.

Q: Which part should be selected for prototype development or low-volume applications?

A: The RN65E1001FB14 in Bulk packaging is suitable for prototype development, manual assembly, and applications where component quantities do not justify automated handling infrastructure.

Q: Do these parts have identical temperature performance?

A: Yes. Both parts operate across the -65°C to 175°C temperature range with identical ±25ppm/°C temperature coefficient, ensuring equivalent thermal stability and performance characteristics.

Q: Are the physical dimensions identical?

A: Yes. Both parts maintain identical axial package dimensions of 0.180" Dia × 0.562" L (4.57mm × 14.27mm), ensuring mechanical compatibility in circuit board layouts and component mounting.