RN65D75R0FRE6 Equivalent & Substitute Parts

Part Overview

The RN65D75R0FRE6 is a 75 Ohm, 1/2W metal film through-hole resistor manufactured by Vishay Dale, designed for military applications per MIL-R-10509/2 specifications. This axial component features flame retardant coating, moisture resistance, and safety-rated construction suitable for demanding environments. The part is currently active in production with 869 pieces available in new original stock. Substitute parts are identified to provide alternative packaging or sourcing options while maintaining identical electrical and mechanical specifications.

Substiute Parts

RN65D75R0FRE6

Vishay DaleIn Stock: 969RN65D75R0FRE6 Datasheet

Current PartRFQ

RN65D75R0FB14

Vishay DaleIn Stock: 966RN65D75R0FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The RN65D75R0FRE6 has one identified substitute: RN65D75R0FB14. Both parts share identical electrical specifications (75 Ohms ±1%, 0.5W, metal film composition, ±100ppm/°C temperature coefficient, -65°C to 175°C operating range) and mechanical dimensions (0.180" Dia x 0.562" L axial package). The substitution is valid based on matching resistance value, tolerance, power rating, composition, temperature coefficient, operating temperature range, package type, and physical dimensions. The primary difference between these parts is packaging format: RN65D75R0FRE6 is supplied in Tape & Reel (TR) format, while RN65D75R0FB14 is supplied in Bulk format.

Parameter Comparison

Engineering Selection Recommendations

Both RN65D75R0FRE6 and RN65D75R0FB14 are active production parts from Vishay Dale with identical electrical and mechanical specifications. Selection between these parts depends on procurement and assembly requirements. The RN65D75R0FRE6 in Tape & Reel format is suitable for automated assembly processes. The RN65D75R0FB14 in Bulk format is suitable for manual assembly or applications where tape packaging is not required. Both parts maintain identical compliance status: RoHS non-compliant and REACH Affected. No electrical performance difference exists between these substitutes.

Frequently Asked Questions (FAQ)

Q: Can RN65D75R0FB14 replace RN65D75R0FRE6 in my circuit?

A: Yes. Both parts have identical electrical specifications (75 Ohms ±1%, 0.5W metal film), temperature characteristics (±100ppm/°C, -65°C to 175°C operating range), and physical dimensions (0.180" Dia x 0.562" L axial package). The only difference is packaging format.

Q: What is the difference between Tape & Reel and Bulk packaging?

A: Tape & Reel (TR) packaging supplies components on continuous tape suitable for automated pick-and-place assembly equipment. Bulk packaging supplies loose components suitable for manual assembly or applications where tape format is not required. Electrical and mechanical performance are identical.

Q: Are these parts suitable for military applications?

A: Yes. Both RN65D75R0FRE6 and RN65D75R0FB14 are military-grade resistors conforming to MIL-R-10509/2 specifications with flame retardant coating, moisture resistance, and safety features.

Q: What is the RoHS compliance status?

A: Both parts are RoHS non-compliant. Both parts are REACH Affected.

Q: Can I use these parts interchangeably in production?

A: Yes, provided your assembly process accommodates the packaging format. If your production line uses automated tape-fed equipment, use RN65D75R0FRE6. If manual assembly or bulk handling is used, RN65D75R0FB14 is suitable. Electrical performance and reliability are identical.