RN65D7501FRE6 Equivalent & Substitute Parts

Part Overview

The RN65D7501FRE6 is a 7.5 kOhms ±1% metal film through-hole resistor rated at 0.5W (1/2W) in axial package configuration. Manufactured by Vishay Dale under the military-grade RN65 series per MIL-R-10509/2 specification, this component features flame retardant coating, moisture resistance, and safety-rated construction suitable for military and high-reliability applications. The part maintains active product status with 670 units in current inventory. Substitute parts are identified when packaging format differs while maintaining identical electrical and mechanical specifications.

Substiute Parts

RN65D7501FRE6

Vishay DaleIn Stock: 722RN65D7501FRE6 Datasheet

Current PartRFQ

RN65D7501FB14

Vishay DaleIn Stock: 1201RN65D7501FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RN65D7501FRE6 is determined by strict equivalence across the following critical parameters:

• Resistance value: 7.5 kOhms
• Tolerance: ±1%
• Power rating: 0.5W (1/2W)
• Composition: Metal Film
• Package configuration: Axial
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -65°C to 175°C
• Physical dimensions: 0.180" Dia × 0.562" L
• Series compliance: MIL-R-10509/2, RN65 base product

The RN65D7501FB14 qualifies as a direct substitute based on identical electrical performance and mechanical form factor. The only distinction between these parts is packaging format: RN65D7501FRE6 is supplied in Tape & Reel (TR) configuration, while RN65D7501FB14 is supplied in Bulk packaging. Both parts share the same base product number (RN65) and maintain full compliance with military specifications.

Parameter Comparison

Engineering Selection Recommendations

Both RN65D7501FRE6 and RN65D7501FB14 maintain active product status and are manufactured to identical electrical and mechanical specifications. Selection between these parts should be based on packaging requirements and supply chain logistics:

The RN65D7501FRE6 in Tape & Reel format is suitable for automated assembly processes and high-volume production environments where component feeding and placement automation is employed.

The RN65D7501FB14 in Bulk packaging is appropriate for manual assembly, prototyping, repair operations, and applications where individual component handling is standard practice.

Both parts comply with MIL-R-10509/2 military specifications and maintain identical performance characteristics across the full operating temperature range of -65°C to 175°C. RoHS non-compliance status is consistent across both variants. Selection should prioritize assembly methodology and procurement workflow requirements rather than electrical performance, as these parameters are fully equivalent.

Frequently Asked Questions (FAQ)

Q: Can RN65D7501FB14 (Bulk) be used as a direct replacement for RN65D7501FRE6 (Tape & Reel)?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format. RN65D7501FB14 can be substituted in any application where RN65D7501FRE6 is specified, provided the assembly process accommodates bulk component handling.

Q: What is the primary distinction between these two part numbers?

A: The parts differ only in packaging and delivery format. RN65D7501FRE6 is supplied on tape and reel for automated pick-and-place assembly. RN65D7501FB14 is supplied in bulk for manual handling and assembly operations.

Q: Are the physical dimensions identical between both parts?

A: Yes. Both parts measure 0.180" diameter × 0.562" length (4.57mm × 14.27mm) and are housed in identical axial package configuration.

Q: Do both parts meet the same military specifications?

A: Yes. Both RN65D7501FRE6 and RN65D7501FB14 comply with MIL-R-10509/2 military specification and are classified under the RN65 series.

Q: Which part should be selected for high-volume automated assembly?

A: RN65D7501FRE6 in Tape & Reel format is optimized for automated assembly lines with component feeding systems.

Q: Which part should be selected for manual assembly or repair applications?

A: RN65D7501FB14 in Bulk packaging is suitable for manual assembly, prototyping, and field repair operations.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts share identical RoHS status (non-compliant), REACH status (affected), and all other compliance certifications.