RN65D4700FRE6 Equivalent & Substitute Parts

Part Overview

The RN65D4700FRE6 is a 470 Ohms ±1% metal film through-hole resistor rated at 0.5W (1/2W) in axial package configuration. Manufactured by Vishay Dale under the military-grade RN65 series per MIL-R-10509/2 specification, this component features flame retardant coating, moisture resistance, and safety-rated construction. The part is currently active in production with 687 units in stock. Substitute parts are identified to address packaging format availability, inventory requirements, or supply chain alternatives while maintaining identical electrical and mechanical specifications.

Substiute Parts

RN65D4700FRE6

Vishay DaleIn Stock: 760RN65D4700FRE6 Datasheet

Current PartRFQ

RN65D4700FB14

Vishay DaleIn Stock: 2050RN65D4700FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RN65D4700FRE6 is determined by strict equivalence across the following critical parameters:

• Resistance value: 470 Ohms
• Tolerance: ±1%
• Power rating: 0.5W (1/2W)
• Composition: Metal Film
• Package configuration: Axial through-hole
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -65°C to 175°C
• Physical dimensions: 0.180" Dia × 0.562" L
• Series compliance: Military RN65, MIL-R-10509/2
• Feature set: Flame retardant coating, military grade, moisture resistant, safety rated

The identified substitute part RN65D4700FB14 maintains identical electrical performance and mechanical compatibility. The distinction between the main part and substitute is limited to packaging format: the RN65D4700FRE6 is supplied in Tape & Reel (TR) format, while the RN65D4700FB14 is supplied in Bulk format. Both parts are manufactured by Vishay Dale under the same base product number RN65 and meet all military and safety specifications.

Parameter Comparison

Engineering Selection Recommendations

Both the RN65D4700FRE6 and RN65D4700FB14 are active production components manufactured by Vishay Dale with identical electrical specifications and military-grade certifications. Selection between these parts is determined by packaging requirements and supply chain considerations:

The RN65D4700FRE6 in Tape & Reel format is suitable for automated assembly processes requiring continuous reel-fed component placement. The RN65D4700FB14 in Bulk format is appropriate for manual assembly, kit builds, or applications where reel packaging is not required. Both parts comply with MIL-R-10509/2 military specifications and maintain the same RoHS non-compliant and REACH Affected regulatory status. Inventory availability differs between formats, with the Bulk variant currently showing higher stock levels (1940 units versus 687 units).

Frequently Asked Questions (FAQ)

Q: Can RN65D4700FB14 be used as a direct replacement for RN65D4700FRE6?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format: Tape & Reel versus Bulk. The substitution is valid for any application where the component specifications match the circuit requirements.

Q: What is the difference between Tape & Reel and Bulk packaging?

A: Tape & Reel (TR) packaging supplies components on a continuous reel suitable for automated pick-and-place assembly equipment. Bulk packaging supplies loose components in a container, typically used for manual assembly or smaller production runs. Both formats contain the same component with identical specifications.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts carry identical military-grade certifications (MIL-R-10509/2), RoHS status (non-compliant), and REACH status (Affected). Regulatory compliance is equivalent across both packaging formats.

Q: What are the key parameters that define substitution eligibility for this resistor?

A: Substitution is valid when the following parameters match: resistance value (470 Ohms), tolerance (±1%), power rating (0.5W), composition (metal film), package type (axial), temperature coefficient (±100ppm/°C), operating temperature range (-65°C to 175°C), physical dimensions (0.180" Dia × 0.562" L), and military series compliance (RN65, MIL-R-10509/2).

Q: Can these parts be used in applications requiring RoHS compliance?

A: No. Both RN65D4700FRE6 and RN65D4700FB14 are marked as RoHS non-compliant. Applications with RoHS compliance requirements must use alternative components that meet RoHS standards.