RN65D3323FRE6 Equivalent & Substitute Parts

Part Overview

The RN65D3323FRE6 is a 332 kOhms ±1% metal film through-hole resistor rated at 0.5W (1/2W) in axial package configuration. Manufactured by Vishay Dale under the military-grade RN65 series, this component features flame retardant coating, moisture resistance, and safety certification per MIL-R-10509/2 specification. The part is currently active and available in Tape & Reel (TR) packaging. Substitute parts are identified when packaging format differs while maintaining identical electrical and mechanical specifications, allowing procurement flexibility based on inventory availability and application assembly requirements.

Substiute Parts

RN65D3323FRE6

Vishay DaleIn Stock: 995RN65D3323FRE6 Datasheet

Current PartRFQ

RN65D3323FB14

Vishay DaleIn Stock: 1149RN65D3323FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RN65D3323FRE6 is determined by equivalence across all critical electrical and mechanical parameters. The primary differentiator between the main part and identified substitutes is packaging format. The RN65D3323FRE6 is supplied in Tape & Reel (TR) format, optimized for automated assembly processes. Substitute parts maintain identical specifications across resistance value, tolerance, power rating, composition, temperature coefficient, operating temperature range, physical dimensions, and military certification. The substitute RN65D3323FB14 differs only in packaging format, supplied as Bulk, suitable for manual assembly or alternative procurement workflows. Both parts are manufactured by Vishay Dale under the same RN65 military series and comply with MIL-R-10509/2 specification.

Key Parameters for Substitution Equivalence:

• Resistance: 332 kOhms
• Tolerance: ±1%
• Power Rating: 0.5W
• Composition: Metal Film
• Package Type: Axial
• Temperature Coefficient: ±100ppm/°C
• Operating Temperature: -65°C to 175°C
• Physical Dimensions: 0.180" Dia x 0.562" L
• Military Series: RN65, MIL-R-10509/2

Parameter Comparison

Engineering Selection Recommendations

Both the RN65D3323FRE6 and RN65D3323FB14 are active, production-grade components manufactured by Vishay Dale. Selection between these parts is determined by assembly process requirements and packaging workflow compatibility.

RN65D3323FRE6 (Tape & Reel): Suitable for automated pick-and-place assembly operations. Tape & Reel packaging provides component spacing and carrier strip compatibility with standard surface-mount and through-hole assembly equipment. This format is standard for high-volume manufacturing environments.

RN65D3323FB14 (Bulk): Suitable for manual assembly, low-volume production, or applications where component handling does not require automated feeder compatibility. Bulk packaging reduces per-unit cost in small-quantity procurement scenarios.

Both parts maintain identical electrical performance, military certification per MIL-R-10509/2, and compliance status. Neither part is RoHS-compliant; both are REACH-affected. Selection between these substitutes does not impact circuit performance, reliability, or regulatory compliance.

Frequently Asked Questions (FAQ)

Q: Can RN65D3323FB14 (Bulk) be used as a direct replacement for RN65D3323FRE6 (Tape & Reel)?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format. RN65D3323FB14 can be used in any application where RN65D3323FRE6 is specified, provided assembly equipment can accommodate bulk component handling.

Q: What is the difference between Tape & Reel and Bulk packaging?

A: Tape & Reel (TR) packaging places components in a continuous carrier strip with defined spacing, designed for automated assembly equipment. Bulk packaging supplies loose components in a container, suitable for manual assembly or alternative handling methods. Electrical and mechanical specifications are identical.

Q: Are there any performance differences between these substitute parts?

A: No. Both parts have identical resistance value (332 kOhms), tolerance (±1%), power rating (0.5W), temperature coefficient (±100ppm/°C), operating temperature range (-65°C to 175°C), and physical dimensions (0.180" Dia x 0.562" L). Performance in circuit operation is equivalent.

Q: Do both parts meet military specifications?

A: Yes. Both RN65D3323FRE6 and RN65D3323FB14 are manufactured under the RN65 military series and comply with MIL-R-10509/2 specification. Both feature flame retardant coating, moisture resistance, and safety certification.

Q: What is the temperature coefficient specification, and why is it important?

A: Both parts have a temperature coefficient of ±100ppm/°C. This specification indicates the maximum change in resistance value per degree Celsius change in operating temperature. At ±100ppm/°C, a 332 kOhm resistor will change approximately 33.2 Ohms per degree Celsius. This specification is critical for precision circuits operating across the full temperature range of -65°C to 175°C.

Q: Are these parts RoHS-compliant?

A: No. Both RN65D3323FRE6 and RN65D3323FB14 are RoHS non-compliant. If RoHS compliance is required, alternative parts must be selected.

Q: What does REACH Affected status mean?

A: REACH Affected status indicates that the component or its materials are subject to European REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) regulations. Both parts carry this status. Compliance documentation should be obtained from the manufacturer for applications subject to REACH requirements.