RN65D3302FRE6 Equivalent & Substitute Parts

Part Overview

The RN65D3302FRE6 is a 33 kOhms ±1% metal film through-hole resistor rated at 0.5W (1/2W) in axial package configuration. Manufactured by Vishay Dale under the military-grade RN65 series (MIL-R-10509/2), this component features flame retardant coating, moisture resistance, and safety-rated construction suitable for military and high-reliability applications. The part is currently active in production with 699 units available in tape & reel packaging. Substitute parts may be required due to packaging availability, inventory constraints, or specific procurement requirements while maintaining identical electrical and mechanical specifications.

Substiute Parts

RN65D3302FRE6

Vishay DaleIn Stock: 797RN65D3302FRE6 Datasheet

Current PartRFQ

RN65D3302FB14

Vishay DaleIn Stock: 2523RN65D3302FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RN65D3302FRE6 is determined by strict equivalence across the following critical parameters:

• Resistance value: 33 kOhms (exact match required)
• Tolerance: ±1% (exact match required)
• Power rating: 0.5W / 1/2W (exact match required)
• Composition: Metal Film (exact match required)
• Temperature coefficient: ±100ppm/°C (exact match required)
• Operating temperature range: -65°C to 175°C (exact match required)
• Package configuration: Axial through-hole (exact match required)
• Physical dimensions: 0.180" Dia × 0.562" L (exact match required)
• Series compliance: MIL-R-10509/2, RN65 (exact match required)

The primary variable among qualified substitutes is packaging format (tape & reel versus bulk). All other electrical, mechanical, and environmental specifications must remain identical to ensure direct interchangeability in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

Both the RN65D3302FRE6 and RN65D3302FB14 are active production components from Vishay Dale with identical electrical and mechanical specifications. Selection between these parts should be based on procurement and assembly requirements:

The RN65D3302FRE6 in tape & reel packaging is suitable for automated assembly processes and high-volume production environments where component feeding systems require standardized reel formats.

The RN65D3302FB14 in bulk packaging is suitable for manual assembly, low-volume production, or applications where tape & reel packaging is not required.

Both parts maintain identical compliance status: RoHS non-compliant and REACH Affected. No electrical performance difference exists between the two part numbers. The choice between them is determined solely by packaging and handling requirements for the specific manufacturing or assembly process.

Frequently Asked Questions (FAQ)

Q: Are RN65D3302FRE6 and RN65D3302FB14 electrically identical?

A: Yes. Both parts have identical resistance value (33 kOhms), tolerance (±1%), power rating (0.5W), temperature coefficient (±100ppm/°C), and operating temperature range (-65°C to 175°C). They are functionally equivalent in all circuit applications.

Q: What is the only difference between these two part numbers?

A: The packaging format. RN65D3302FRE6 is supplied in tape & reel format, while RN65D3302FB14 is supplied in bulk format. All other specifications are identical.

Q: Can I use RN65D3302FB14 in place of RN65D3302FRE6 in my assembly process?

A: Electrical substitution is valid. However, bulk packaging may not be compatible with automated tape-fed assembly equipment. Manual handling or process modification may be required.

Q: Do both parts meet military specifications?

A: Yes. Both parts comply with MIL-R-10509/2 and are part of the military-grade RN65 series. Both feature flame retardant coating, moisture resistance, and safety-rated construction.

Q: What is the physical size of these resistors?

A: Both parts have identical axial dimensions: 0.180" diameter × 0.562" length (4.57mm × 14.27mm).

Q: Are there any compliance differences between these parts?

A: No. Both parts have identical RoHS status (non-compliant) and REACH status (Affected). Compliance requirements are the same for both part numbers.