RN65D3011FBSL Equivalent & Substitute Parts

Part Overview

The RN65D3011FBSL is a 3.01 kOhms ±1% metal film through-hole resistor rated at 0.5W (1/2W) in axial package configuration. This component is manufactured by Vishay Dale and complies with military specification MIL-R-10509/2. The part features flame retardant coating, moisture resistance, and safety-rated construction suitable for military and high-reliability applications. With 927 units in current stock and active product status, this resistor remains available for new designs and replacement applications.

Equivalent substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity when the primary part number becomes unavailable or when design requirements permit functional alternatives.

Substiute Parts

RN65D3011FBSL

Vishay DaleIn Stock: 997RN65D3011FBSL Datasheet

Current PartRFQ

RN65D3011FB14

Vishay DaleIn Stock: 1039RN65D3011FB14 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RN65D3011FBSL are identified based on strict parametric equivalence across all critical electrical and mechanical specifications. The substitution logic is based on the following key parameters that must remain identical:

• Resistance value: 3.01 kOhms
• Tolerance: ±1%
• Power rating: 0.5W (1/2W)
• Composition: Metal Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -65°C to 175°C
• Package configuration: Axial
• Physical dimensions: 0.180" Dia × 0.562" L
• Number of terminations: 2
• Series compliance: Military, MIL-R-10509/2, RN65

Parts meeting all these criteria are classified as parametric equivalents and may be used interchangeably in circuit applications where the RN65D3011FBSL is specified.

Parameter Comparison

Engineering Selection Recommendations

Both the RN65D3011FBSL and RN65D3011FB14 maintain active product status with Vishay Dale and are fully qualified to military specification MIL-R-10509/2. Both parts carry identical compliance designations: RoHS non-compliant, REACH Affected, and ECCN EAR99 classification.

Selection between these parts may be based on inventory availability and procurement lead times. The RN65D3011FB14 currently maintains 945 units in stock compared to 927 units for the RN65D3011FBSL, providing marginal inventory advantage. Both parts are suitable for military and high-reliability applications requiring flame retardant, moisture-resistant metal film resistors with axial lead configuration.

Frequently Asked Questions (FAQ)

Q: Can RN65D3011FB14 be used as a direct replacement for RN65D3011FBSL?

A: Yes. Both parts are parametric equivalents meeting identical electrical specifications (3.01 kOhms ±1%, 0.5W, ±100ppm/°C), mechanical dimensions (0.180" Dia × 0.562" L), and military compliance requirements (MIL-R-10509/2). They are functionally interchangeable in circuit applications.

Q: Are there any package or footprint differences between these parts?

A: No. Both parts use identical axial package configuration with matching physical dimensions of 0.180" diameter by 0.562" length (4.57mm × 14.27mm). PCB layout and mounting considerations remain unchanged.

Q: What compliance certifications apply to both substitute parts?

A: Both parts share identical compliance status: RoHS non-compliant, REACH Affected, ECCN EAR99, and HTSUS code 8533.21.0090. Military specification compliance is MIL-R-10509/2 for both parts.

Q: Do these parts have the same temperature performance characteristics?

A: Yes. Both parts operate across the identical temperature range of -65°C to 175°C with matching temperature coefficient of ±100ppm/°C, ensuring equivalent thermal stability and performance in temperature-sensitive applications.

Q: What is the basis for substitution between these part numbers?

A: Substitution is based on complete parametric equivalence across all critical specifications: resistance value, tolerance, power rating, composition, temperature coefficient, operating temperature range, package type, physical dimensions, and military series compliance. All parameters must match exactly for parts to be classified as substitutes.