RN65D2202FRE6 Equivalent & Substitute Parts

Part Overview

The RN65D2202FRE6 is a 22 kOhms ±1% metal film through-hole resistor rated at 0.5W (1/2W) in axial package configuration. Manufactured by Vishay Dale under the military-grade RN65 series (MIL-R-10509/2), this component features flame retardant coating, moisture resistance, and safety certification suitable for military and high-reliability applications. The part is currently active in production with 703 units in stock. Equivalent and substitute parts may be required due to packaging availability, inventory constraints, or application-specific power rating requirements.

Substiute Parts

RN65D2202FRE6

Vishay DaleIn Stock: 749RN65D2202FRE6 Datasheet

Current PartRFQ

RN65D2202FB14

Vishay DaleIn Stock: 5492RN65D2202FB14 Datasheet

DirectRFQ

RN70E2202FB14

Vishay DaleIn Stock: 1734RN70E2202FB14 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RN65D2202FRE6 is determined by the following critical parameters:

Primary Substitution Criteria (Must Match):

• Resistance value: 22 kOhms
• Tolerance: ±1%
• Composition: Metal Film
• Package type: Axial
• Operating temperature range: -65°C to 175°C
• Features: Flame Retardant Coating, Military, Moisture Resistant, Safety

Secondary Substitution Criteria (Allowable Variation):

• Power rating: Equal or greater than 0.5W
• Packaging format: Tape & Reel (TR) or Bulk
• Temperature coefficient: Equal or lower absolute value
• Series designation: Military-grade MIL-R-10509 compliance

Substitute parts are grouped into two categories: direct equivalents (identical specifications with different packaging) and upgrades (enhanced power rating with improved temperature stability).

Parameter Comparison

Engineering Selection Recommendations

RN65D2202FB14 (Direct Equivalent): This part is functionally identical to the RN65D2202FRE6, differing only in packaging format (Bulk versus Tape & Reel). Both maintain identical electrical specifications, military certification under MIL-R-10509/2, and active production status. Selection of this substitute is appropriate when Bulk packaging meets procurement requirements and inventory availability (5466 units) is advantageous.

RN70E2202FB14 (Upgrade): This part provides enhanced performance through increased power rating (0.75W versus 0.5W) and improved temperature stability (±25ppm/°C versus ±100ppm/°C). The RN70E2202FB14 operates under the higher military specification MIL-R-10509/3 and maintains all other critical parameters. Selection of this upgrade is appropriate for applications requiring greater thermal margin or enhanced frequency stability. Inventory availability is 1689 units.

All three parts maintain identical resistance, tolerance, composition, operating temperature range, and military-grade features. All are RoHS non-compliant and REACH-affected with identical ECCN and HTSUS classifications.

Frequently Asked Questions (FAQ)

Q: Can RN65D2202FB14 be used as a direct replacement for RN65D2202FRE6?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format: RN65D2202FRE6 is supplied in Tape & Reel format, while RN65D2202FB14 is supplied in Bulk format. Both meet MIL-R-10509/2 specifications and are suitable for identical applications.

Q: What are the advantages of using RN70E2202FB14 instead of RN65D2202FRE6?

A: The RN70E2202FB14 offers two performance improvements: higher power rating (0.75W versus 0.5W) and superior temperature coefficient (±25ppm/°C versus ±100ppm/°C). These enhancements provide greater thermal headroom and improved frequency stability in precision circuits. The trade-off is compliance under the higher military specification MIL-R-10509/3.

Q: Are all three parts compatible with the same PCB footprint?

A: Yes. All three parts share identical axial package dimensions (0.180" Dia x 0.562" L / 4.57mm x 14.27mm) and two-termination configuration, ensuring mechanical compatibility on the same PCB layout.

Q: What is the difference between Tape & Reel and Bulk packaging?

A: Tape & Reel packaging (RN65D2202FRE6) is designed for automated assembly equipment and high-volume production. Bulk packaging (RN65D2202FB14, RN70E2202FB14) is supplied loose or in standard containers, typically used for manual assembly or lower-volume applications. Electrical performance is identical.

Q: Can RN70E2202FB14 be used in applications designed for RN65D2202FRE6?

A: Yes. The RN70E2202FB14 meets or exceeds all electrical specifications of the RN65D2202FRE6. The higher power rating and improved temperature coefficient make it suitable for any application requiring the original part, with enhanced performance margins.

Q: Are there any compliance or certification differences between these parts?

A: All three parts share identical RoHS status (non-compliant), REACH status (affected), ECCN (EAR99), and HTSUS classification (8533.21.0090). The primary difference is military specification compliance: RN65D2202FRE6 and RN65D2202FB14 comply with MIL-R-10509/2, while RN70E2202FB14 complies with the higher MIL-R-10509/3 standard.