RN65D2003FRSL Equivalent & Substitute Parts

Part Overview

The RN65D2003FRSL is a 200 kOhms ±1% metal film axial through-hole resistor rated at 0.5W (1/2W) manufactured by Vishay Dale. This component is part of the military-grade RN65 series, designed to MIL-R-10509/2 specifications with flame retardant coating and moisture-resistant properties. The part is currently active in production with 988 units in stock. Substitute parts are identified when packaging format differs while maintaining identical electrical and mechanical specifications.

Substiute Parts

RN65D2003FRSL

Vishay DaleIn Stock: 1005RN65D2003FRSL Datasheet

Current PartRFQ

RN65D2003FB14

Vishay DaleIn Stock: 1180RN65D2003FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the RN65D2003FRSL is determined by equivalence across the following critical parameters:

• Resistance value: 200 kOhms
• Tolerance: ±1%
• Power rating: 0.5W (1/2W)
• Composition: Metal Film
• Package case: Axial
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -65°C to 175°C
• Physical dimensions: 0.180" Dia x 0.562" L
• Series compliance: MIL-R-10509/2, RN65

The identified substitute part differs only in packaging format (Bulk versus Tape & Reel), which does not affect electrical performance or mechanical compatibility in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

Both the RN65D2003FRSL and RN65D2003FB14 are active production components from Vishay Dale with identical electrical and mechanical specifications. Selection between these parts is determined by procurement and assembly requirements:

• RN65D2003FRSL (Tape & Reel packaging) is suitable for automated assembly processes requiring continuous component feed.
• RN65D2003FB14 (Bulk packaging) is suitable for manual assembly, kit builds, or applications where tape-and-reel format is not required.

Both parts maintain compliance with MIL-R-10509/2 military specifications and carry identical RoHS non-compliant and REACH Affected designations. Inventory availability: RN65D2003FRSL (988 units), RN65D2003FB14 (1112 units).

Frequently Asked Questions (FAQ)

Q: Can RN65D2003FB14 replace RN65D2003FRSL in circuit applications?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Bulk versus Tape & Reel). Circuit performance, tolerance, power rating, and temperature characteristics are equivalent.

Q: What is the difference between Tape & Reel and Bulk packaging?

A: Tape & Reel (TR) packaging is used for automated pick-and-place assembly machines. Bulk packaging contains loose components suitable for manual assembly or hand-soldering applications. The component itself is identical in both formats.

Q: Are there any compliance differences between these parts?

A: No. Both parts share identical RoHS non-compliant and REACH Affected designations. Military series compliance (MIL-R-10509/2, RN65) applies to both.

Q: Which part should I select for my application?

A: Selection depends on your assembly method. Use RN65D2003FRSL for automated assembly lines. Use RN65D2003FB14 for manual assembly or when bulk quantities are preferred. Electrical performance is identical.

Q: Are both parts currently available?

A: Yes. RN65D2003FRSL has 988 units in stock. RN65D2003FB14 has 1112 units in stock. Both are active production parts.