RN65D2000FRSL Equivalent & Substitute Parts

Part Overview

The RN65D2000FRSL is a 200 Ohms ±1% 0.5W through-hole resistor manufactured by Vishay Dale. This axial metal film resistor features flame retardant coating and is designed for military applications compliant with MIL-R-10509/2 specifications. The part is currently active in production with 1073 units in stock. Substitute parts are identified when packaging format differs or when resistance values require circuit-level evaluation for functional equivalence.

Substiute Parts

RN65D2000FRSL

Vishay DaleIn Stock: 1107RN65D2000FRSL Datasheet

Current PartRFQ

RN65D2000FB14

Vishay DaleIn Stock: 1834RN65D2000FB14 Datasheet

DirectRFQ

RN65D1501FRE6

Vishay DaleIn Stock: 1316RN65D1501FRE6 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the RN65D2000FRSL is determined by the following criteria:

Direct Substitutes (Identical Electrical and Mechanical Parameters):

• Same resistance value: 200 Ohms
• Same tolerance: ±1%
• Same power rating: 0.5W
• Same composition: Metal Film
• Same package type: Axial
• Same temperature coefficient: ±100ppm/°C
• Same operating temperature range: -65°C to 175°C
• Same series compliance: Military, MIL-R-10509/2, RN65

Packaging format (Tape & Reel vs. Bulk vs. Cut Tape) does not affect electrical performance and permits direct substitution when supply chain or procurement requirements necessitate alternative packaging.

Functional Alternatives (Different Resistance Value):

• Parts with different resistance values are listed as functional alternatives only when the circuit design permits resistance value changes. These require circuit-level validation.

Parameter Comparison

Engineering Selection Recommendations

RN65D2000FB14 is a direct electrical and mechanical equivalent to RN65D2000FRSL. The only difference is packaging format (Bulk vs. Tape & Reel). Selection between these two parts depends on procurement and assembly process requirements. Both parts maintain identical performance characteristics, compliance status, and military specifications.

RN65D1501FRE6 is a functional alternative with a different resistance value (1.5 kOhms vs. 200 Ohms). This part shares identical electrical characteristics (tolerance, power rating, temperature coefficient, operating range) and military compliance. Use of this part requires circuit design validation to confirm that the higher resistance value is functionally acceptable for the intended application.

All three parts maintain RoHS non-compliant and REACH Affected status. Selection should account for regulatory requirements of the end application.

Frequently Asked Questions (FAQ)

Q: Can RN65D2000FB14 be used as a direct replacement for RN65D2000FRSL?

A: Yes. RN65D2000FB14 is electrically and mechanically identical to RN65D2000FRSL. The difference is packaging format: RN65D2000FRSL is supplied in Tape & Reel format, while RN65D2000FB14 is supplied in Bulk format. Both parts meet MIL-R-10509/2 specifications and maintain identical performance across all electrical parameters.

Q: What is the difference between Tape & Reel, Bulk, and Cut Tape packaging?

A: Packaging format affects supply chain logistics and assembly automation compatibility but does not alter electrical performance. Tape & Reel (TR) is optimized for automated pick-and-place assembly. Bulk packaging is suitable for manual assembly or reel-feeding systems. Cut Tape (CT) provides individual component strips for selective assembly processes.

Q: Can RN65D1501FRE6 replace RN65D2000FRSL in my circuit?

A: RN65D1501FRE6 has a resistance value of 1.5 kOhms, compared to 200 Ohms in RN65D2000FRSL. This 7.5x difference in resistance requires circuit-level evaluation. Use this part only if your circuit design permits the higher resistance value and the functional requirements are met.

Q: Are all three parts compliant with military specifications?

A: Yes. All three parts comply with MIL-R-10509/2 military specifications and are part of the RN65 series. All maintain identical temperature coefficients, operating temperature ranges, and flame retardant coating features.

Q: What is the inventory status for each part?

A: RN65D2000FRSL has 1073 units in stock, RN65D2000FB14 has 1768 units in stock, and RN65D1501FRE6 has 1264 units in stock. All parts are currently active in production.