RN65D2000FRE6 Equivalent & Substitute Parts

Part Overview

The RN65D2000FRE6 is a 200 Ohms ±1% 0.5W through-hole resistor manufactured by Vishay Dale, featuring metal film construction with flame retardant coating. This component is part of the military-grade RN65 series compliant with MIL-R-10509/2 specifications. The part is currently active in production with 804 units in stock. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and application-specific packaging requirements.

Substiute Parts

RN65D2000FRE6

Vishay DaleIn Stock: 897RN65D2000FRE6 Datasheet

Current PartRFQ

RN65D2000FB14

Vishay DaleIn Stock: 1834RN65D2000FB14 Datasheet

DirectRFQ

RN65D1501FRE6

Vishay DaleIn Stock: 1316RN65D1501FRE6 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the RN65D2000FRE6 is determined by the following critical parameters:

Direct Equivalent Criteria:

• Resistance value: 200 Ohms
• Tolerance: ±1%
• Power rating: 0.5W (1/2W)
• Composition: Metal Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -65°C to 175°C
• Package type: Axial
• Physical dimensions: 0.180" Dia × 0.562" L
• Series compliance: MIL-R-10509/2, RN65

Packaging Variation: The RN65D2000FB14 provides identical electrical and mechanical specifications with alternative packaging (Bulk instead of Tape & Reel), suitable for applications where tape packaging is not required.

Resistance Value Variation: The RN65D1501FRE6 represents a higher resistance value (1.5 kOhms) within the same RN65 military series. This part shares identical electrical characteristics (tolerance, power rating, temperature coefficient, operating range) and physical dimensions but is classified as an upgrade option for circuits requiring higher resistance values.

Parameter Comparison

Engineering Selection Recommendations

RN65D2000FB14 Selection: Choose this direct equivalent when tape & reel packaging is not a requirement. This part maintains all electrical and mechanical specifications of the RN65D2000FRE6 while offering bulk packaging. Both parts are active products with full military compliance and identical MIL-R-10509/2 certification. Higher inventory availability (1768 units) may support extended procurement cycles.

RN65D1501FRE6 Selection: This upgrade option applies only to circuit designs requiring 1.5 kOhms resistance. The part shares identical electrical performance characteristics (tolerance, power rating, temperature coefficient, operating range) and physical dimensions with the main part. Selection requires circuit-level validation to confirm the higher resistance value is functionally appropriate. This part is supplied in cut tape format and maintains full military compliance.

Compliance Considerations: All three parts maintain identical RoHS non-compliant and REACH Affected status. Military applications requiring MIL-R-10509/2 compliance are supported by all options within the RN65 series.

Frequently Asked Questions (FAQ)

Q: Can RN65D2000FB14 be used as a direct replacement for RN65D2000FRE6?

A: Yes. Both parts are electrically and mechanically identical with 200 Ohms resistance, ±1% tolerance, 0.5W power rating, and identical physical dimensions. The only difference is packaging format: RN65D2000FRE6 is supplied in tape & reel, while RN65D2000FB14 is supplied in bulk. Selection depends on assembly process requirements.

Q: Is RN65D1501FRE6 compatible with circuits designed for RN65D2000FRE6?

A: RN65D1501FRE6 is not a direct replacement. This part has a resistance value of 1.5 kOhms compared to 200 Ohms in the main part. It shares identical electrical performance characteristics (tolerance, power rating, temperature coefficient, operating range) and physical dimensions. Use only in applications where the higher resistance value is required by circuit design.

Q: What packaging formats are available for 200 Ohms RN65 resistors?

A: The RN65D2000FRE6 is available in tape & reel (TR) format, while the RN65D2000FB14 is available in bulk packaging. Both maintain identical electrical and mechanical specifications. Selection depends on assembly equipment compatibility and procurement volume requirements.

Q: Are all substitute parts military-grade components?

A: Yes. All parts listed are part of the military-grade RN65 series compliant with MIL-R-10509/2 specifications. All feature flame retardant coating, moisture resistance, and safety-rated metal film construction suitable for military applications.

Q: Do these parts have different temperature performance?

A: No. All parts maintain identical operating temperature range (-65°C to 175°C) and temperature coefficient (±100ppm/°C), ensuring consistent performance across the full operating envelope.