Equivalent & Substitute Parts for RN65D2000FBSL

Part Overview

The RN65D2000FBSL is a 200 Ohm, 1/2W metal film axial resistor manufactured by Vishay Dale, designed for military and aerospace applications. This component features flame retardant coating, moisture resistance, and compliance with MIL-R-10509/2 specifications. The part is currently active in production with 877 units in stock. Alternative equivalent parts may be required due to packaging availability, inventory constraints, or specific procurement requirements.

Substiute Parts

RN65D2000FBSL

Vishay DaleIn Stock: 975RN65D2000FBSL Datasheet

Current PartRFQ

RN65D1501FRE6

Vishay DaleIn Stock: 1316RN65D1501FRE6 Datasheet

UpgradeRFQ

RN65D2000FB14

Vishay DaleIn Stock: 1834RN65D2000FB14 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the RN65D2000FBSL is determined by strict equivalence across the following critical parameters:

• Resistance Value: 200 Ohms (exact match required)
• Tolerance: ±1% (exact match required)
• Power Rating: 0.5W / 1/2W (exact match required)
• Composition: Metal Film (exact match required)
• Package Type: Axial (exact match required)
• Temperature Coefficient: ±100ppm/°C (exact match required)
• Operating Temperature Range: -65°C to 175°C (exact match required)
• Military Compliance: MIL-R-10509/2 series (exact match required)

The parametric equivalent RN65D2000FB14 meets all electrical and mechanical specifications of the main part. Packaging format (Bulk vs. Cut Tape) represents the only difference and does not affect electrical performance or functional compatibility.

The RN65D1501FRE6 is listed as an upgrade substitute but differs in resistance value (1.5 kOhms vs. 200 Ohms) and packaging format (Cut Tape vs. Bulk). This part is not electrically equivalent and should only be selected when circuit design permits a different resistance value.

Parameter Comparison

Engineering Selection Recommendations

RN65D2000FB14 is the direct parametric equivalent for RN65D2000FBSL. Both parts are manufactured by Vishay Dale, share identical electrical specifications, and comply with MIL-R-10509/2 military standards. The only distinction is packaging format (Bulk). This part is suitable for direct substitution in all applications where the main part is specified. Higher inventory availability (1768 units) may support procurement timelines.

RN65D1501FRE6 is classified as an upgrade substitute due to its different resistance value (1.5 kOhms). This part maintains identical power rating, tolerance, temperature coefficient, and operating temperature range. Selection of this part requires circuit design verification to confirm that 1.5 kOhms is functionally acceptable in place of 200 Ohms. This part is not a drop-in replacement.

All three parts maintain active production status and comply with RoHS non-compliant and REACH Affected classifications as specified for this product category.

Frequently Asked Questions (FAQ)

Q: Can RN65D2000FB14 be used as a direct replacement for RN65D2000FBSL?

A: Yes. RN65D2000FB14 is a parametric equivalent with identical electrical and mechanical specifications. The difference in packaging format (Bulk vs. Bulk) does not affect electrical performance or functional compatibility.

Q: What is the difference between RN65D2000FBSL and RN65D1501FRE6?

A: The primary difference is resistance value: RN65D2000FBSL is 200 Ohms, while RN65D1501FRE6 is 1.5 kOhms. All other parameters (tolerance, power rating, temperature coefficient, operating range) are identical. RN65D1501FRE6 is not a direct replacement and requires circuit design verification.

Q: Are all three parts military-grade components?

A: Yes. All three parts comply with MIL-R-10509/2 military specifications and feature flame retardant coating, moisture resistance, and safety characteristics suitable for military and aerospace applications.

Q: Does packaging format affect electrical performance?

A: No. Packaging format (Bulk vs. Cut Tape) is a procurement and handling consideration only. Electrical performance and functional characteristics remain identical across packaging formats for the same part number base.

Q: What is the operating temperature range for these resistors?

A: All three parts operate across -65°C to 175°C, with a temperature coefficient of ±100ppm/°C, meeting military-grade thermal specifications.