RN65D1200FRE6 Equivalent & Substitute Parts

Part Overview

The RN65D1200FRE6 is a 120 Ohm, 1/2W metal film axial resistor manufactured by Vishay Dale, designed for military applications per MIL-R-10509/2 specifications. This through-hole component features flame retardant coating, moisture resistance, and safety-rated construction suitable for high-reliability electronic assemblies. The part is currently active in production with 963 units available in tape and reel packaging. Identifying equivalent substitute parts is necessary to ensure supply chain continuity, optimize procurement across different packaging formats, and maintain design flexibility while preserving electrical and mechanical compatibility.

Substiute Parts

RN65D1200FRE6

Vishay DaleIn Stock: 1044RN65D1200FRE6 Datasheet

Current PartRFQ

RN65D1200FB14

Vishay DaleIn Stock: 6951RN65D1200FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RN65D1200FRE6 is determined by strict equivalence across the following critical parameters:

• Resistance value: 120 Ohms
• Tolerance: ±1%
• Power rating: 0.5W (1/2W)
• Composition: Metal Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -65°C to 175°C
• Package type: Axial
• Physical dimensions: 0.180" Dia × 0.562" L
• Series compliance: Military, MIL-R-10509/2, RN65
• Features: Flame Retardant Coating, Military, Moisture Resistant, Safety

The RN65D1200FB14 qualifies as a direct substitute because it maintains identical electrical specifications, mechanical dimensions, and military-grade construction. The only difference is packaging format: the main part is supplied in tape and reel (TR) configuration, while the substitute is available in bulk packaging. This distinction does not affect component performance or compatibility in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

Both the RN65D1200FRE6 and RN65D1200FB14 are active production components from Vishay Dale with identical electrical and mechanical specifications. Selection between these parts should be based on procurement and assembly requirements:

The RN65D1200FRE6 in tape and reel packaging is optimized for automated assembly processes and high-volume production environments where component feeding and placement efficiency are critical.

The RN65D1200FB14 in bulk packaging is suitable for manual assembly, low-volume builds, or applications where tape and reel format is not required.

Both parts maintain identical compliance status: RoHS non-compliant and REACH Affected. Component selection should account for end-application regulatory requirements and supply chain availability. Inventory levels differ between packaging formats, with bulk packaging currently showing higher stock availability (6858 units versus 963 units).

Frequently Asked Questions (FAQ)

Q: Can RN65D1200FB14 be used as a direct replacement for RN65D1200FRE6?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format. RN65D1200FRE6 is supplied in tape and reel; RN65D1200FB14 is supplied in bulk. Circuit performance and reliability are unaffected by this distinction.

Q: What determines substitution eligibility for this resistor?

A: Substitution requires matching across all critical parameters: 120 Ohm resistance, ±1% tolerance, 0.5W power rating, metal film composition, ±100ppm/°C temperature coefficient, -65°C to 175°C operating range, axial package type, 0.180" Dia × 0.562" L dimensions, and military-grade construction per MIL-R-10509/2.

Q: Does packaging format affect electrical performance?

A: No. Tape and reel versus bulk packaging is a supply and handling format only. Electrical specifications, temperature performance, and reliability characteristics remain identical.

Q: Are there compliance differences between these parts?

A: No. Both parts share identical RoHS and REACH compliance status. Both are RoHS non-compliant and REACH Affected.

Q: Which packaging format should I select for my application?

A: Select tape and reel (RN65D1200FRE6) for automated assembly lines. Select bulk (RN65D1200FB14) for manual assembly or low-volume production. Availability and lead time may also influence selection.