Equivalent & Substitute Parts for RN65D1002FRE6

Part Overview

The RN65D1002FRE6 is a 10 kOhms ±1% metal film axial through-hole resistor rated at 0.5W (1/2W) power dissipation. Manufactured by Vishay Dale under the military-grade RN65 series (MIL-R-10509/2), this component features flame retardant coating, moisture resistance, and safety certification suitable for military and high-reliability applications. The part is currently active in production with 972 units in stock.

Equivalent and substitute parts are identified when design requirements permit variations in packaging format, temperature coefficient performance, or power rating while maintaining core electrical specifications and mechanical compatibility.

Substiute Parts

RN65D1002FRE6

Vishay DaleIn Stock: 1026RN65D1002FRE6 Datasheet

Current PartRFQ

RN65D1002FB14

Vishay DaleIn Stock: 1211RN65D1002FB14 Datasheet

DirectRFQ

RN65C1002FB14

Vishay DaleIn Stock: 907RN65C1002FB14 Datasheet

UpgradeRFQ

RN65C1002FRE6

Vishay DaleIn Stock: 2206RN65C1002FRE6 Datasheet

UpgradeRFQ

RN65E1002FB14

Vishay DaleIn Stock: 944RN65E1002FB14 Datasheet

UpgradeRFQ

RN70C1002FB14

Vishay DaleIn Stock: 914RN70C1002FB14 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RN65D1002FRE6 is determined by the following criteria:

Primary Electrical Parameters (Must Match):

• Resistance value: 10 kOhms
• Tolerance: ±1%
• Operating temperature range: -65°C to 175°C
• Composition: Metal Film
• Package type: Axial

Variable Parameters (Substitution Allowed):

• Packaging format (Cut Tape vs. Bulk)
• Temperature coefficient (±100ppm/°C, ±50ppm/°C, ±25ppm/°C)
• Power rating (0.5W or higher)
• Military series designation (RN65 or RN70)

All identified substitutes maintain identical resistance, tolerance, temperature range, and axial mechanical form factor. Variations in temperature coefficient represent improved stability performance. The RN70C1002FB14 represents an upgrade path with increased power rating (0.75W) while maintaining all other core specifications.

Parameter Comparison

Engineering Selection Recommendations

Direct Equivalent (Packaging Variation): RN65D1002FB14 is a direct electrical equivalent differing only in packaging format (Bulk vs. Cut Tape). Selection depends on assembly process requirements and tape handling capability.

Improved Stability Substitutes (Temperature Coefficient Reduction): RN65C1002FB14, RN65C1002FRE6, and RN65E1002FB14 offer superior temperature coefficient performance (±50ppm/°C and ±25ppm/°C respectively) while maintaining identical electrical specifications. These are suitable for applications requiring tighter frequency stability or reduced thermal drift.

Power Rating Upgrade: RN70C1002FB14 provides increased power dissipation capability (0.75W vs. 0.5W) within the same physical package and military series classification. This substitution is appropriate for circuits with higher power requirements or thermal margin requirements.

All substitute parts maintain active production status, RoHS non-compliant classification, REACH affected status, and identical mechanical dimensions (0.180" Dia x 0.562" L).

Frequently Asked Questions (FAQ)

Q: Can RN65D1002FB14 replace RN65D1002FRE6 directly? A: Yes. Both parts are electrically and mechanically identical. The difference is packaging format: RN65D1002FB14 is supplied in Bulk packaging while RN65D1002FRE6 is supplied in Cut Tape (CT). Selection depends on your assembly equipment compatibility.

Q: What is the advantage of RN65C1002FRE6 over RN65D1002FRE6? A: RN65C1002FRE6 has a temperature coefficient of ±50ppm/°C compared to ±100ppm/°C for RN65D1002FRE6. This provides improved stability across the operating temperature range (-65°C to 175°C), reducing resistance drift in temperature-sensitive applications. Both maintain identical 10 kOhms resistance, ±1% tolerance, and 0.5W power rating.

Q: Is RN70C1002FB14 a suitable substitute? A: RN70C1002FB14 is a substitute only if your circuit design permits a higher power rating (0.75W vs. 0.5W). The resistor belongs to the RN70 military series (MIL-R-10509/3) instead of RN65 (MIL-R-10509/2). All other electrical parameters remain identical. Verify military specification compliance requirements before substitution.

Q: What packaging format should I select? A: Cut Tape (CT) packaging is suitable for automated pick-and-place assembly. Bulk packaging is used for manual assembly or alternative handling processes. Electrical performance is identical between packaging formats.

Q: Are all substitutes RoHS compliant? A: No. All listed parts, including the main part RN65D1002FRE6, are RoHS non-compliant. If RoHS compliance is required, alternative component families must be evaluated.

Q: Can I use RN65E1002FB14 in a military application? A: Yes. RN65E1002FB14 is part of the military RN65 series (MIL-R-10509/2) with identical military classification, flame retardant coating, and moisture resistance features. The improved temperature coefficient (±25ppm/°C) may provide additional performance margin in military specifications.