RN65C2002DRE6 Equivalent & Substitute Parts

Part Overview

The RN65C2002DRE6 is a 20 kOhms ±0.5% metal film through-hole resistor rated at 0.5W (1/2W) in axial package configuration. Manufactured by Vishay Dale under the military-grade RN65 series (MIL-R-10509/2), this component features flame retardant coating, moisture resistance, and safety certification suitable for military and high-reliability applications. The part maintains active product status with 925 units currently in stock.

Equivalent and substitute parts are identified when they maintain the same resistance value, power rating, and package type while meeting or exceeding the electrical and mechanical specifications of the original component.

Substiute Parts

RN65C2002DRE6

Vishay DaleIn Stock: 1005RN65C2002DRE6 Datasheet

Current PartRFQ

RN65C2002BB14

Vishay DaleIn Stock: 741RN65C2002BB14 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RN65C2002DRE6 is determined by the following criteria:

Critical Parameters (Must Match):

• Resistance value: 20 kOhms
• Power rating: 0.5W (1/2W)
• Package type: Axial
• Composition: Metal Film
• Operating temperature range: -65°C to 175°C
• Series classification: Military, MIL-R-10509/2, RN65

Allowable Variation Parameters:

• Tolerance: May be equal to or tighter (lower) than ±0.5%
• Temperature coefficient: ±50ppm/°C or better
• Packaging format: Bulk or Tape & Reel acceptable

The RN65C2002BB14 qualifies as a direct substitute based on matching all critical parameters while providing improved tolerance specification (±0.1% versus ±0.5%).

Parameter Comparison

Engineering Selection Recommendations

Both the RN65C2002DRE6 and RN65C2002BB14 are active products from Vishay Dale within the military-grade RN65 series. Selection between these parts should be based on the following factors:

RN65C2002DRE6 (Tape & Reel packaging): Suitable for high-volume automated assembly operations where tape and reel packaging provides handling efficiency and component feeding compatibility with standard pick-and-place equipment.

RN65C2002BB14 (Bulk packaging): Appropriate for lower-volume applications, manual assembly, or situations where tighter tolerance specification (±0.1%) is required for circuit performance. The improved tolerance reduces resistor value drift across the specified operating temperature range.

Both parts maintain identical compliance status (RoHS non-compliant, REACH Affected) and military-grade certifications. The choice between them depends on assembly methodology and tolerance requirements rather than electrical performance limitations.

Frequently Asked Questions (FAQ)

Q: Can RN65C2002BB14 replace RN65C2002DRE6 in existing designs?

A: Yes. The RN65C2002BB14 is electrically and mechanically compatible. It provides the same 20 kOhms resistance, 0.5W power rating, and axial package configuration. The tighter tolerance (±0.1% versus ±0.5%) represents an improvement in specification accuracy.

Q: What is the primary difference between these two parts?

A: The main differences are tolerance specification and packaging format. RN65C2002BB14 offers ±0.1% tolerance compared to ±0.5% for RN65C2002DRE6, and is supplied in bulk packaging rather than tape and reel.

Q: Are there any compliance or certification differences?

A: No. Both parts share identical RoHS status (non-compliant), REACH status (Affected), and military-grade series classification (MIL-R-10509/2, RN65).

Q: Does packaging format affect electrical performance?

A: No. Packaging format (tape & reel versus bulk) affects handling and assembly methodology only. Electrical and thermal characteristics remain identical.

Q: Which part should be selected for new designs?

A: Selection depends on assembly requirements and tolerance needs. For automated assembly with standard tape-and-reel compatible equipment, RN65C2002DRE6 is appropriate. For applications requiring tighter tolerance control, RN65C2002BB14 is the better choice.