RN65C1302FRE6 Equivalent & Substitute Parts

Part Overview

The RN65C1302FRE6 is a 13 kOhms ±1% metal film through-hole resistor rated at 0.5W (1/2W) in axial package configuration. Manufactured by Vishay Dale under the military-grade RN65 series (MIL-R-10509/2), this component features flame retardant coating, moisture resistance, and safety certification suitable for military and high-reliability applications. The part maintains active product status with 1055 units in current inventory. Substitute parts may be required due to supply constraints, design revisions, or application-specific parameter adjustments while maintaining equivalent functional performance within specified electrical and mechanical tolerances.

Substiute Parts

RN65C1302FRE6

Vishay DaleIn Stock: 1100RN65C1302FRE6 Datasheet

Current PartRFQ

RN60E2000BB14

Vishay DaleIn Stock: 1658RN60E2000BB14 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

The RN60E2000BB14 is listed as a substitute for the RN65C1302FRE6 based on the following allowed parameters:

Common Electrical Characteristics:

• Metal film composition
• Axial through-hole package configuration
• Operating temperature range: -65°C to 175°C
• Military-grade construction (MIL-R-10509 series)
• Flame retardant coating, moisture resistant, safety features
• RoHS non-compliant status
• REACH affected classification

Substitution Basis: Both components share identical package type (axial), composition (metal film), environmental operating range, military certification lineage, and protective features. The substitute maintains equivalent mechanical compatibility and environmental performance specifications required for military and high-reliability circuit applications.

Parameter Comparison

Engineering Selection Recommendations

Component selection between RN65C1302FRE6 and RN60E2000BB14 must be based on circuit-specific electrical requirements, as these parts differ significantly in resistance value (13 kOhms versus 200 Ohms) and power rating (0.5W versus 0.25W). Both components maintain active product status and identical compliance profiles (RoHS non-compliant, REACH affected, EAR99 classification). The substitute offers superior tolerance specification (±0.1% versus ±1%) and lower temperature coefficient (±25ppm/°C versus ±50ppm/°C), which may provide enhanced stability in precision applications. Both components satisfy military-grade construction requirements and identical operating temperature specifications (-65°C to 175°C). Physical dimensions differ, requiring verification of board layout compatibility. Selection should prioritize circuit functional requirements and available inventory status.

Frequently Asked Questions (FAQ)

Q: Can RN60E2000BB14 directly replace RN65C1302FRE6 in any application?

A: No. These components have different resistance values (200 Ohms versus 13 kOhms) and power ratings (0.25W versus 0.5W). Direct substitution is only valid when the circuit design specifically requires the RN60E2000BB14 electrical characteristics. Resistance value and power rating must match circuit requirements.

Q: What are the key compatibility factors between these parts?

A: Both components share identical package type (axial through-hole), composition (metal film), operating temperature range (-65°C to 175°C), military certification lineage (MIL-R-10509 series), and protective features (flame retardant, moisture resistant). Physical dimensions differ, requiring board layout verification.

Q: Does the RN60E2000BB14 offer any performance advantages?

A: The RN60E2000BB14 provides tighter tolerance (±0.1% versus ±1%) and lower temperature coefficient (±25ppm/°C versus ±50ppm/°C), offering improved stability characteristics. However, these advantages apply only when the circuit design accommodates the different resistance value and lower power rating.

Q: Are there packaging differences between these parts?

A: Yes. RN65C1302FRE6 is supplied in Tape & Reel (TR) packaging, while RN60E2000BB14 is supplied in Bulk packaging. Physical dimensions also differ: RN65C1302FRE6 measures 0.180" Dia x 0.562" L, while RN60E2000BB14 measures 0.145" Dia x 0.344" L.

Q: Do both parts meet the same compliance requirements?

A: Yes. Both components share identical compliance status: RoHS non-compliant, REACH affected, EAR99 classification, and HTSUS code 8533.21.0090. Both maintain active product status from Vishay Dale.