RN65C1001BRE6 Equivalent & Substitute Parts

Part Overview

The RN65C1001BRE6 is a 1 kOhms ±0.1% metal film through-hole resistor rated at 0.5W (1/2W) in axial package configuration. Manufactured by Vishay Dale under the military-grade RN65 series (MIL-R-10509/2), this component features flame retardant coating, moisture resistance, and safety-rated construction suitable for military and high-reliability applications. The part is currently active in production with 738 units in stock. Substitute parts may be required due to packaging format availability, supply chain considerations, or specific procurement requirements while maintaining identical electrical and mechanical performance.

Substiute Parts

RN65C1001BRE6

Vishay DaleIn Stock: 777RN65C1001BRE6 Datasheet

Current PartRFQ

RN65C1001BB14

Vishay DaleIn Stock: 861RN65C1001BB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the RN65C1001BRE6 is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part RN65C1001BB14 maintains identical specifications in resistance value, tolerance, power rating, composition, temperature coefficient, operating temperature range, physical dimensions, and military series designation. The only difference between these parts is packaging format: the main part is supplied in Tape & Reel (TR) configuration, while the substitute is supplied in Bulk packaging. Both parts share the same base product number (RN65) and are manufactured by Vishay Dale under identical military specifications (MIL-R-10509/2). Substitution is valid when packaging format does not impose constraints on assembly or procurement workflows.

Parameter Comparison

Engineering Selection Recommendations

Both RN65C1001BRE6 and RN65C1001BB14 are active production parts manufactured by Vishay Dale with identical electrical and mechanical specifications. Selection between these parts should be based on packaging requirements and procurement workflow compatibility. The RN65C1001BRE6 in Tape & Reel format is suitable for automated assembly processes and high-volume production environments. The RN65C1001BB14 in Bulk packaging is suitable for manual assembly, kit builds, or applications where tape-and-reel handling is not required. Both parts maintain identical compliance status (RoHS non-compliant, REACH Affected) and are suitable for military and high-reliability applications requiring MIL-R-10509/2 specification adherence. Inventory availability should be considered: RN65C1001BRE6 has 738 units in stock, while RN65C1001BB14 has 812 units in stock.

Frequently Asked Questions (FAQ)

Q: Can RN65C1001BB14 be used as a direct replacement for RN65C1001BRE6?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Bulk versus Tape & Reel). Substitution is valid provided the assembly process can accommodate the different packaging format.

Q: What is the difference between Tape & Reel and Bulk packaging?

A: Tape & Reel (TR) packaging supplies components wound on continuous tape in reels, optimized for automated pick-and-place assembly equipment. Bulk packaging supplies loose components in containers, suitable for manual assembly or applications where automated handling is not used.

Q: Are the physical dimensions identical between these parts?

A: Yes. Both parts have identical axial package dimensions of 0.180" diameter × 0.562" length (4.57mm × 14.27mm).

Q: Do both parts meet the same military specifications?

A: Yes. Both parts are manufactured to MIL-R-10509/2 specification and are part of the Vishay Dale RN65 military-grade series.

Q: What is the temperature operating range for these resistors?

A: Both parts operate across -65°C to 175°C, with a temperature coefficient of ±50ppm/°C.

Q: Are there any compliance differences between these parts?

A: No. Both parts share identical RoHS non-compliant and REACH Affected status.