RN60E2001FRE6 Equivalent & Substitute Parts

Part Overview

The RN60E2001FRE6 is a 2 kOhms ±1% metal film through-hole resistor rated at 0.25W (1/4W) in axial package configuration. Manufactured by Vishay Dale, this component is part of the military-grade RN60 series compliant with MIL-R-10509/1 specifications. The part features flame retardant coating, moisture resistance, and safety-rated construction suitable for military and high-reliability applications. With active product status and 956 units in current inventory, substitute parts may be required for applications demanding tighter tolerance specifications or alternative packaging formats while maintaining equivalent electrical and mechanical performance.

Substiute Parts

RN60E2001FRE6

Vishay DaleIn Stock: 987RN60E2001FRE6 Datasheet

Current PartRFQ

RN60E2001BB14

Vishay DaleIn Stock: 1183RN60E2001BB14 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RN60E2001FRE6 is determined by strict equivalence across the following critical parameters:

• Resistance Value: Must be 2 kOhms
• Power Rating: Must be 0.25W (1/4W)
• Composition: Must be Metal Film
• Package Type: Must be Axial
• Temperature Coefficient: Must be ±25ppm/°C
• Operating Temperature Range: Must be -65°C to 175°C
• Series Compliance: Must be RN60 series, MIL-R-10509/1

The RN60E2001BB14 qualifies as a substitute part because it maintains identical values across all critical electrical and mechanical parameters. The primary distinction is tolerance specification (±0.1% versus ±1%) and packaging format (Bulk versus Tape & Reel), which represent an upgrade in precision capability and a change in delivery format rather than a functional incompatibility.

Parameter Comparison

Engineering Selection Recommendations

Both the RN60E2001FRE6 and RN60E2001BB14 maintain active product status from Vishay Dale and are fully qualified for military applications under MIL-R-10509/1 specifications. Selection between these parts should be based on application-specific requirements:

The RN60E2001FRE6 is appropriate for standard military and high-reliability applications where ±1% tolerance meets circuit performance requirements and tape & reel packaging aligns with automated assembly processes.

The RN60E2001BB14 is suitable for applications requiring tighter tolerance control (±0.1%) or where bulk packaging is preferred for manual assembly or lower-volume production runs. The improved tolerance specification does not introduce any incompatibilities with the original design.

Both parts share identical compliance status regarding RoHS non-compliance and REACH affectation, ensuring consistent regulatory treatment in supply chain management.

Frequently Asked Questions (FAQ)

Q: Can RN60E2001BB14 be used as a direct replacement for RN60E2001FRE6?

A: Yes. Both parts maintain identical resistance value (2 kOhms), power rating (0.25W), composition (metal film), package type (axial), temperature coefficient (±25ppm/°C), and operating temperature range (-65°C to 175°C). The RN60E2001BB14 offers improved tolerance (±0.1% versus ±1%), which represents enhanced precision capability rather than a limitation.

Q: What is the difference between Tape & Reel and Bulk packaging?

A: Tape & Reel (TR) packaging is designed for automated pick-and-place assembly equipment and is standard for high-volume production. Bulk packaging is used for manual assembly, lower-volume applications, or component inventory management. Both formats contain identical components; the difference is in delivery and handling format only.

Q: Are there any compliance differences between these parts?

A: No. Both parts share identical RoHS non-compliance status and REACH affectation. They are both manufactured by Vishay Dale under the same MIL-R-10509/1 military specification and carry identical certifications and regulatory classifications.

Q: Does the tighter tolerance of RN60E2001BB14 affect circuit compatibility?

A: No. Tighter tolerance (±0.1%) is a subset of the original tolerance specification (±1%). Any circuit designed to function with ±1% tolerance will operate within specification with ±0.1% tolerance. The substitute part provides equal or better performance in terms of tolerance control.

Q: What is the inventory status for these parts?

A: RN60E2001FRE6 has 956 units in stock. RN60E2001BB14 has 1095 units in stock. Both parts are actively manufactured and available for procurement.