RN60E2000FRSL Equivalent & Substitute Parts

Part Overview

The RN60E2000FRSL is a 200 Ohm, 1/4W through-hole axial resistor manufactured by Vishay Dale, designed for military applications per MIL-R-10509/1 specification. This metal film resistor features flame retardant coating, moisture resistance, and safety-rated construction with ±1% tolerance. The part is currently active in production with 1144 units in stock. Substitute parts are identified when equivalent electrical and mechanical parameters are required for design flexibility, inventory management, or packaging format changes while maintaining circuit performance specifications.

Substiute Parts

RN60E2000FRSL

Vishay DaleIn Stock: 1253RN60E2000FRSL Datasheet

Current PartRFQ

RN60E2000BB14

Vishay DaleIn Stock: 1658RN60E2000BB14 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RN60E2000FRSL is permissible when the following core electrical and mechanical parameters remain constant or improve:

• Resistance value: 200 Ohms (exact match required)
• Power rating: 0.25W minimum (equal or higher acceptable)
• Composition: Metal Film (required for stability and temperature coefficient performance)
• Package type: Axial (required for mechanical fit and PCB compatibility)
• Physical dimensions: 0.145" Dia × 0.344" L (required for board layout and spacing)
• Operating temperature range: -65°C to 175°C minimum (equal or wider range acceptable)
• Temperature coefficient: ±25ppm/°C or better (tighter tolerance acceptable)
• Series compliance: MIL-R-10509/1 military specification (required for military applications)

The RN60E2000BB14 qualifies as a direct substitute based on these parameters. The tolerance specification may be tightened from ±1% to ±0.1% without affecting circuit compatibility, as tighter tolerance represents an upgrade in precision.

Parameter Comparison

Engineering Selection Recommendations

The RN60E2000BB14 is a direct functional equivalent to the RN60E2000FRSL for all circuit applications requiring a 200 Ohm, 1/4W metal film resistor within the military MIL-R-10509/1 specification. Both parts maintain identical electrical performance across the full operating temperature range and comply with the same regulatory frameworks (RoHS non-compliant, REACH Affected, ECCN EAR99, HTSUS 8533.21.0090).

The primary distinction between these parts is packaging format: the RN60E2000FRSL is supplied in Tape & Reel format suitable for automated assembly, while the RN60E2000BB14 is supplied in Bulk format. The tolerance specification of the RN60E2000BB14 (±0.1%) represents a precision upgrade over the RN60E2000FRSL (±1%), providing enhanced accuracy for applications requiring tighter component tolerances without any performance degradation.

Selection between these parts should be based on procurement requirements, assembly methodology, and inventory management practices rather than electrical or mechanical constraints.

Frequently Asked Questions (FAQ)

Q: Can the RN60E2000BB14 replace the RN60E2000FRSL in existing designs?

A: Yes. Both parts are electrically and mechanically identical with respect to resistance value, power rating, temperature coefficient, operating temperature range, and physical dimensions. The RN60E2000BB14 provides equal or superior performance in all specified parameters.

Q: What is the difference between Tape & Reel and Bulk packaging?

A: Tape & Reel packaging is optimized for automated pick-and-place assembly equipment, while Bulk packaging is suitable for manual assembly or alternative handling methods. The electrical and mechanical properties of the resistor itself are unchanged by packaging format.

Q: Does the tighter tolerance of the RN60E2000BB14 (±0.1% vs ±1%) affect compatibility?

A: No. Tighter tolerance represents an improvement in precision and does not create compatibility issues. Circuits designed for ±1% tolerance will function correctly with ±0.1% components.

Q: Are both parts compliant with military specifications?

A: Yes. Both the RN60E2000FRSL and RN60E2000BB14 comply with MIL-R-10509/1 military specification and are rated for the full military temperature range of -65°C to 175°C.

Q: Can these parts be used interchangeably in high-reliability applications?

A: Yes, provided that the specific packaging format (Tape & Reel vs Bulk) meets the assembly and handling requirements of the application. Both parts maintain identical electrical characteristics and military-grade construction.