RN60E1000FRE6 Equivalent & Substitute Parts

Part Overview

The RN60E1000FRE6 is a 100 Ohm ±1% metal film axial through-hole resistor rated at 0.25W (1/4W), manufactured by Vishay Dale. This component is part of the military-grade RN60 series, featuring flame retardant coating, moisture resistance, and safety certification. The part is currently active in production with 753 units in stock. Substitute parts are identified to address packaging format availability and tolerance requirements while maintaining electrical and mechanical compatibility.

Substiute Parts

RN60E1000FRE6

Vishay DaleIn Stock: 767RN60E1000FRE6 Datasheet

Current PartRFQ

RN60E1000FB14

Vishay DaleIn Stock: 1069RN60E1000FB14 Datasheet

DirectRFQ

RN60E1000BB14

Vishay DaleIn Stock: 1190RN60E1000BB14 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RN60E1000FRE6 is determined by the following critical parameters: resistance value (100 Ohms), power rating (0.25W), composition (metal film), package type (axial), temperature coefficient (±25ppm/°C), operating temperature range (-65°C to 175°C), physical dimensions (0.145" Dia × 0.344" L), and series classification (RN60 military grade).

The identified substitutes maintain all core electrical and mechanical parameters. Variations occur only in packaging format (Tape & Reel versus Bulk) and tolerance specification (±1% versus ±0.1%), which do not affect functional interchangeability in circuit applications where the original tolerance is acceptable or where tighter tolerance provides enhanced performance.

Parameter Comparison

Engineering Selection Recommendations

All three parts are active products from Vishay Dale with identical electrical specifications and mechanical dimensions. Selection between RN60E1000FRE6 and its substitutes depends on packaging requirements and tolerance specifications.

RN60E1000FRE6 is supplied in Tape & Reel format, suitable for automated assembly processes. RN60E1000FB14 provides equivalent specifications in Bulk packaging. RN60E1000BB14 offers the same electrical and mechanical characteristics with enhanced tolerance (±0.1% versus ±1%), applicable where precision requirements exceed the original specification.

All parts comply with MIL-R-10509/1 military standards, feature flame retardant coating, moisture resistance, and safety certification. RoHS non-compliance status is consistent across all variants. REACH and ECCN classifications remain unchanged.

Frequently Asked Questions (FAQ)

Q: Can RN60E1000FB14 replace RN60E1000FRE6 in production?

A: Yes. Both parts are electrically and mechanically identical. The difference is packaging format: RN60E1000FRE6 is supplied in Tape & Reel, while RN60E1000FB14 is supplied in Bulk. Selection depends on assembly process requirements.

Q: What is the advantage of RN60E1000BB14?

A: RN60E1000BB14 maintains all electrical and mechanical specifications of the original part but provides tighter tolerance (±0.1% versus ±1%). This upgrade is applicable in circuits requiring higher precision resistor values.

Q: Are all three parts physically identical?

A: Yes. All three parts share identical dimensions (0.145" Dia × 0.344" L), composition (metal film), and axial package type. Physical interchangeability is confirmed.

Q: Do packaging differences affect circuit performance?

A: No. Packaging format (Tape & Reel versus Bulk) affects only handling and assembly logistics, not electrical performance or component reliability.

Q: Are all parts military-grade?

A: Yes. All three parts are classified as RN60 military series, comply with MIL-R-10509/1 standards, and feature identical military-grade specifications including flame retardant coating and moisture resistance.