RN60D9310FRE6 Equivalent & Substitute Parts

Part Overview

The RN60D9310FRE6 is a 931 Ohm ±1% metal film axial through-hole resistor rated at 0.25W (1/4W) manufactured by Vishay Dale. This component is part of the military-grade RN60 series, featuring flame retardant coating, moisture resistance, and safety certification per MIL-R-10509/1. The part is currently active in production with 969 pieces in stock. Substitute parts are identified when packaging format differs while maintaining identical electrical and mechanical specifications.

Substiute Parts

RN60D9310FRE6

Vishay DaleIn Stock: 997RN60D9310FRE6 Datasheet

Current PartRFQ

RN60D9310FB14

Vishay DaleIn Stock: 837RN60D9310FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The RN60D9310FB14 qualifies as a direct substitute for the RN60D9310FRE6 based on the following criteria:

Identical Electrical Parameters:

• Resistance: 931 Ohms
• Tolerance: ±1%
• Power Rating: 0.25W (1/4W)
• Temperature Coefficient: ±100ppm/°C
• Operating Temperature Range: -65°C to 175°C

Identical Mechanical Parameters:

• Composition: Metal Film
• Package Type: Axial
• Physical Dimensions: 0.145" Dia x 0.344" L (3.68mm x 8.74mm)
• Number of Terminations: 2

Identical Certifications & Features:

• Series: Military, MIL-R-10509/1, RN60
• Flame Retardant Coating
• Moisture Resistant
• Safety Certification

Difference:

• Packaging Format: RN60D9310FRE6 supplied in Tape & Reel (TR); RN60D9310FB14 supplied in Bulk

Parameter Comparison

Engineering Selection Recommendations

Both RN60D9310FRE6 and RN60D9310FB14 are active production components from Vishay Dale with identical electrical and mechanical specifications. Selection between these parts depends on procurement and assembly requirements:

RN60D9310FRE6 (Tape & Reel): Suitable for automated assembly processes requiring tape-and-reel packaging format.

RN60D9310FB14 (Bulk): Suitable for manual assembly, repair, or applications where bulk packaging is acceptable.

Both parts maintain compliance with MIL-R-10509/1 military specifications and are RoHS non-compliant with REACH affected status. Component selection should be based on assembly methodology and supply chain requirements rather than electrical performance, as both parts are functionally equivalent.

Frequently Asked Questions (FAQ)

Q: Can RN60D9310FB14 replace RN60D9310FRE6 in production?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Bulk vs. Tape & Reel). Substitution is valid if your assembly process accommodates bulk packaging.

Q: What determines if a part is a valid substitute?

A: Valid substitutes must match all electrical parameters (resistance, tolerance, power rating, temperature coefficient, operating temperature range) and mechanical parameters (composition, package type, physical dimensions, termination count). Packaging format differences do not affect electrical compatibility.

Q: Are there any compliance differences between these parts?

A: No. Both parts share identical certifications, features, and compliance status. Both are military-grade RN60 series components with flame retardant coating and moisture resistance.

Q: What is the impact of different packaging formats?

A: Tape & Reel (TR) packaging is optimized for automated pick-and-place assembly. Bulk packaging is suitable for manual assembly or repair applications. The component itself is identical; only the delivery format differs.

Q: Can I mix these parts in the same assembly?

A: Yes. Since both parts are electrically and mechanically identical, they can be used interchangeably within the same circuit or assembly without performance impact.