RN60D8200FRE6 Equivalent & Substitute Parts

Part Overview

The RN60D8200FRE6 is a 820 Ohms ±1% metal film through-hole resistor rated at 0.25W (1/4W) in axial package configuration. Manufactured by Vishay Dale under the military-grade RN60 series per MIL-R-10509/1 specification, this component features flame retardant coating and moisture-resistant construction suitable for military and high-reliability applications. The part maintains active product status with 783 units currently in stock. Substitute parts may be required due to packaging availability, inventory constraints, or specific procurement requirements while maintaining identical electrical and mechanical specifications.

Substiute Parts

RN60D8200FRE6

Vishay DaleIn Stock: 821RN60D8200FRE6 Datasheet

Current PartRFQ

RN60D8200FB14

Vishay DaleIn Stock: 1277RN60D8200FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RN60D8200FRE6 is determined by strict equivalence across the following critical parameters:

• Resistance value: 820 Ohms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Composition: Metal Film
• Package configuration: Axial
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -65°C to 175°C
• Physical dimensions: 0.145" Dia x 0.344" L (3.68mm x 8.74mm)
• Series compliance: Military, MIL-R-10509/1, RN60

The primary distinction between the main part and its substitute lies in packaging format: the RN60D8200FRE6 is supplied in Tape & Reel (TR) configuration, while the substitute RN60D8200FB14 is supplied in Bulk packaging. All electrical characteristics, mechanical specifications, and performance parameters remain identical.

Parameter Comparison

Engineering Selection Recommendations

Both the RN60D8200FRE6 and RN60D8200FB14 are active products manufactured by Vishay Dale with identical electrical and mechanical specifications. Selection between these parts should be based on packaging requirements and procurement logistics:

The RN60D8200FRE6 in Tape & Reel format is suitable for automated assembly processes and high-volume production environments requiring component feeding through pick-and-place equipment.

The RN60D8200FB14 in Bulk packaging is appropriate for manual assembly, prototyping, repair operations, or applications where tape-and-reel handling infrastructure is not available.

Both parts maintain compliance with MIL-R-10509/1 military specifications, feature identical RoHS non-compliant status, REACH Affected designation, and EAR99 ECCN classification. Electrical performance, reliability characteristics, and environmental operating parameters are fully equivalent.

Frequently Asked Questions (FAQ)

Q: Can RN60D8200FB14 be used as a direct replacement for RN60D8200FRE6 in automated assembly?

A: The RN60D8200FB14 is electrically and mechanically identical to the RN60D8200FRE6. However, the Bulk packaging format is not compatible with automated tape-and-reel feeding systems. Manual component placement or tape conversion would be required.

Q: Are there any electrical performance differences between these two parts?

A: No. Both parts share identical resistance value (820 Ohms), tolerance (±1%), power rating (0.25W), temperature coefficient (±100ppm/°C), and operating temperature range (-65°C to 175°C). Electrical performance is fully equivalent.

Q: What is the primary difference between RN60D8200FRE6 and RN60D8200FB14?

A: The sole difference is packaging format. RN60D8200FRE6 is supplied in Tape & Reel (TR) configuration for automated assembly, while RN60D8200FB14 is supplied in Bulk format for manual handling and assembly operations.

Q: Do both parts meet military specifications?

A: Yes. Both the RN60D8200FRE6 and RN60D8200FB14 are manufactured to MIL-R-10509/1 military specification and belong to the RN60 military-grade resistor series with identical feature sets including flame retardant coating and moisture resistance.

Q: Which part should I select for high-volume production?

A: The RN60D8200FRE6 in Tape & Reel format is the standard choice for high-volume automated production due to compatibility with pick-and-place assembly equipment and component feeders.

Q: Which part should I select for prototyping or repair applications?

A: The RN60D8200FB14 in Bulk packaging is more practical for prototyping, repair, and low-volume manual assembly operations where tape-and-reel infrastructure is not required.